Based on the HA topology image below, which two statements describe the end-state when power is removed from the ION 1200-S labeled “Active”, assuming that the ION labeled “Standby” becomes the active ION? (Choose two.)
Answer(s): B,C
In a branch HA deployment:-The VRRP Virtual IP addresses assigned to SVIs are moved to the newly active ION, maintaining continuity of traffic routing.-The newly active ION sends gratuitous ARPs on the LAN to update switches and hosts with the MAC address of the VRRP IPs, ensuring minimal disruption.Connections to ISP A or LTE/5G depend on whether the interfaces are physically connected to the standby ION and their configuration; in this topology, only the LAN-facing behavior is guaranteed by VRRP and ARP.
During a security audit, an administrator must provide evidence of the routing isolation and controlled leaking between the PCI-Zone and the Mgmt-Zone on a specific ION device.Which command, when executed on the ION CLI, will output the configuration for all VRF route leak rules?
Answer(s): A
This command displays all configured VRF route-leaking rules on the ION device, including the source VRF, destination VRF, VNIs, and permitted IP prefixes.It allows the administrator to verify controlled route leaking between the PCI-Zone and Mgmt-Zone while confirming their routing isolation.
https://docs.paloaltonetworks.com/prisma-sd-wan/ion-cli-reference/use-cli-commands/dump-comm ands/dump-vrf
A network design mandates segmentation at the routing level and traffic isolation across various services, such as teller cash registers, ATM traffic, guest Wi-Fi, and corporate applications.Which command can be used to validate and display the Virtual Routing and Forwarding (VRF) route leak rules?
Answer(s): D
The command inspect vrf route_leak_rule all in Prisma SD-WAN is used to validate and display VRF route leak rules. This allows administrators to verify which routes are being shared between VRFs, ensuring proper segmentation and traffic isolation across different services such as teller systems, ATMs, guest Wi-Fi, and corporate applications.
In which modes can a Prisma SD-WAN branch be deployed?
A Prisma SD-WAN branch can operate in POV (Proof of Value), Production, or Analytics modes.-POV mode is used for evaluation and testing.-Production mode enables full SD-WAN functionality for live traffic.-Analytics mode allows traffic observation without influencing forwarding decisions, useful for assessment or gradual deployment.-
A network engineer is monitoring a high availability (HA) pair of ION 7000 devices at a regional hub. During a maintenance window, the active device's control link interface is accidentally disabled, interrupting the heartbeat communication between the peers.Which action does the standby ION device perform?
Answer(s): B
In an ION high availability pair, loss of the HA control-link heartbeat causes the standby device to take over the active role when failover conditions are met. It then uses gratuitous ARP to update neighboring devices so traffic is redirected to the newly active ION interfaces.
A new Prisma SD-WAN site is deployed with one internet (ISP-1) and one MPLS circuit (Carrier-B). The public VPNs to the data center ION are up, but the private VPNs over MPLS transport are down.Which mismatch is the root cause of the issue?
Private VPN formation over MPLS depends on matching WAN network definitions between the branch and data center sites. If the MPLS circuits are associated with different WAN networks, Prisma SD-WAN cannot establish the private overlay tunnels across that transport, even though public VPNs over the internet remain operational.
Which IONs can support Branch Gateway?
Prisma SD-WAN Branch Gateway functionality is supported on higher-capacity ION models that can handle aggregation and gateway services for multiple branch connections. Models such as 9200, 3200, 5200, and 7116V are capable of acting as Branch Gateways, providing routing, security, and SD-WAN overlay termination for branch sites.
When an ION device has been claimed, the cloud-based controller generates and communicates with the device by which method?
When a Prisma SD-WAN ION device is claimed, the cloud-based controller communicates securely with the device using the Manufacturer Installed Certificate (MIC). The MIC is pre-installed by the manufacturer on the device, enabling secure authentication and encrypted communication with the Prisma SD-WAN cloud controller.
Share your comments for Palo Alto Networks SD-WAN-Engineer exam with other users:
good practice
so far it is really informative
hi i want it please please upload it
am preparing for exam ,just nice questions
please upload c_tadm_23 exam
can we get tdvan4 vantage data engineering pdf?
want to clear the exam.
could you please upload the dumps of sap c_sac_2302
asm management configuration is about storage
kool thumb up
just passed the az-500 exam this last friday. most of the questions in this exam dumps are in the exam. i bought the full version and noticed some of the questions which were answered wrong in the free version are all corrected in the full version. this site is good but i wish the had it in an interactive version like a test engine simulator.
i can practice for exam
please i need this exam.
i need the dump
i want it bad, even if cs6 maybe retired, i want to learn cs6
i hate comptia with all my heart with their "choose the best" answer format as an argument could be made on every question. they say "the "comptia way", lmao no this right here boys is the comptia way 100%. take it from someone whos failed this exam twice but can configure an entire complex network that these are the questions that are on the test 100% no questions asked. the pbqs are dead on! nice work
very good materials
thanks for your support.
iam impressed with the quality of these dumps. they questions and answers were easy to understand and the xengine app was very helpful to use.
not bad but you question database from isaca
awesome contents
answer to 134 is casb. while data loss prevention is the goal, in order to implement dlp in cloud applications you need to deploy a casb.
are these brain dumps sufficient enough to go write exam after practicing them? or does one need more material this wont be enough?
i did attend the required cources and i need to be sure that i am ready to take the exam, i would ask you please to share the questions, to be sure that i am fit to proceed with taking the exam.
why only give explanations on some, and not all questions and their respective answers?
refresh db knowledge
interested for sap certification
could you please upload practice questions for scr exam ?
please upload free oracle cloud infrastructure 2023 foundations associate exam braindumps
sweating! they are tricky
i never use these dumps sites but i had to do it for this exam as it is impossible to pass without using these question dumps.
good practice and well sites.
passed my first exam last week and pass the second exam this morning. thank you sir for all the help and these brian dumps.
does anyone who attended exam csa 8.8, can confirm these questions are really coming ? or these are just for practicing?
Keeping this site free takes real effort. We constantly battle automated scraping and unauthorized content copying. A quick account helps us protect the community and keep the site free.
To continue studying for your SD-WAN-Engineer, please sign in or create a free account.