Palo Alto Networks SD-WAN Engineer SD-WAN-Engineer Dumps in PDF

Free Palo Alto Networks SD-WAN-Engineer Real Questions (page: 5)

Based on the HA topology image below, which two statements describe the end-state when power is removed from the ION 1200-S labeled “Active”, assuming that the ION labeled “Standby” becomes the active ION? (Choose two.)

  1. Both the connection to ISP A and the connection to LTE/5G will be usable.
  2. The VRRP Virtual IP address assigned to any SVIs will be moved to the newly active ION.
  3. The newly active ION will send a gratuitous ARP to the LAN for the IP address of any SVIs.
  4. The connection to ISP A will be usable, but the connection to LTE/5G will not.

Answer(s): B,C

Explanation:

In a branch HA deployment:
-The VRRP Virtual IP addresses assigned to SVIs are moved to the newly active ION, maintaining continuity of traffic routing.
-The newly active ION sends gratuitous ARPs on the LAN to update switches and hosts with the MAC address of the VRRP IPs, ensuring minimal disruption.
Connections to ISP A or LTE/5G depend on whether the interfaces are physically connected to the standby ION and their configuration; in this topology, only the LAN-facing behavior is guaranteed by VRRP and ARP.



During a security audit, an administrator must provide evidence of the routing isolation and controlled leaking between the PCI-Zone and the Mgmt-Zone on a specific ION device.
Which command, when executed on the ION CLI, will output the configuration for all VRF route leak rules?

  1. dump vrf route_leak_rule all
  2. inspect vrf info all
  3. show routing-table vrf-leak
  4. debug vrf leak-database

Answer(s): A

Explanation:

This command displays all configured VRF route-leaking rules on the ION device, including the source VRF, destination VRF, VNIs, and permitted IP prefixes.
It allows the administrator to verify controlled route leaking between the PCI-Zone and Mgmt-Zone while confirming their routing isolation.


Reference:

https://docs.paloaltonetworks.com/prisma-sd-wan/ion-cli-reference/use-cli-commands/dump-comm ands/dump-vrf



A network design mandates segmentation at the routing level and traffic isolation across various services, such as teller cash registers, ATM traffic, guest Wi-Fi, and corporate applications.
Which command can be used to validate and display the Virtual Routing and Forwarding (VRF) route leak rules?

  1. show interface vrf route_leak_rule all
  2. dump vrf route_leak_rule
  3. inspect flow_browser vrf all
  4. inspect vrf route_leak_rule all

Answer(s): D

Explanation:

The command inspect vrf route_leak_rule all in Prisma SD-WAN is used to validate and display VRF route leak rules. This allows administrators to verify which routes are being shared between VRFs, ensuring proper segmentation and traffic isolation across different services such as teller systems, ATMs, guest Wi-Fi, and corporate applications.



In which modes can a Prisma SD-WAN branch be deployed?

  1. Testing, Control, POV
  2. Production, Control, Disabled
  3. Disabled, Analytics, Control
  4. POV, Production, Analytics

Answer(s): D

Explanation:

A Prisma SD-WAN branch can operate in POV (Proof of Value), Production, or Analytics modes.
-POV mode is used for evaluation and testing.
-Production mode enables full SD-WAN functionality for live traffic.
-Analytics mode allows traffic observation without influencing forwarding decisions, useful for assessment or gradual deployment.
-



A network engineer is monitoring a high availability (HA) pair of ION 7000 devices at a regional hub. During a maintenance window, the active device's control link interface is accidentally disabled, interrupting the heartbeat communication between the peers.
Which action does the standby ION device perform?

  1. It transitions to a standby-bypass mode that forwards all traffic to the data center ION for remote processing until the local peer recovers.
  2. It assumes the active role and issues a gratuitous ARP to redirect incoming frames to its own physical or virtual interfaces.
  3. It monitors the primary device's public WAN IP addresses and triggers a failover if those addresses become unreachable.
  4. It enters a dual-active state to load-balance traffic across both circuits until the controller resolves the split-brain condition.

Answer(s): B

Explanation:

In an ION high availability pair, loss of the HA control-link heartbeat causes the standby device to take over the active role when failover conditions are met. It then uses gratuitous ARP to update neighboring devices so traffic is redirected to the newly active ION interfaces.



A new Prisma SD-WAN site is deployed with one internet (ISP-1) and one MPLS circuit (Carrier-B). The public VPNs to the data center ION are up, but the private VPNs over MPLS transport are down.
Which mismatch is the root cause of the issue?

  1. Circuit category between the site and data center
  2. Circuit name between the site and data center
  3. Circuit speed between the site and data center
  4. WAN network between the site and data center

Answer(s): D

Explanation:

Private VPN formation over MPLS depends on matching WAN network definitions between the branch and data center sites. If the MPLS circuits are associated with different WAN networks, Prisma SD-WAN cannot establish the private overlay tunnels across that transport, even though public VPNs over the internet remain operational.



Which IONs can support Branch Gateway?

  1. 3102V, 3200, 1200S, 5200
  2. 1200, 3200, 9200, 7108V
  3. 3104V, 1200S, 5200, 7108V
  4. 9200, 3200, 5200, 7116V

Answer(s): D

Explanation:

Prisma SD-WAN Branch Gateway functionality is supported on higher-capacity ION models that can handle aggregation and gateway services for multiple branch connections. Models such as 9200, 3200, 5200, and 7116V are capable of acting as Branch Gateways, providing routing, security, and SD-WAN overlay termination for branch sites.



When an ION device has been claimed, the cloud-based controller generates and communicates with the device by which method?

  1. Manufacturer Installed Certificate (MIC)
  2. Existing customer public key infrastructure (KPI)
  3. Self-signed certificate
  4. Customer Installed Certificate (CIC)

Answer(s): A

Explanation:

When a Prisma SD-WAN ION device is claimed, the cloud-based controller communicates securely with the device using the Manufacturer Installed Certificate (MIC). The MIC is pre-installed by the manufacturer on the device, enabling secure authentication and encrypted communication with the Prisma SD-WAN cloud controller.



Share your comments for Palo Alto Networks SD-WAN-Engineer exam with other users:

T
TS
7/18/2023 3:32:00 PM

good knowledge

A
Asad Khan
11/1/2023 2:44:00 AM

answer 10 should be a because only a new project will be created & the organization is the same.

R
Raj
9/12/2023 3:49:00 PM

can you please upload the dump again

C
Christian Klein
6/23/2023 1:32:00 PM

is it legit questions from sap certifications ?

A
anonymous
1/12/2024 3:34:00 PM

question 16 should be b (changing the connector settings on the monitor) pc and monitor were powered on. the lights on the pc are on indicating power. the monitor is showing an error text indicating that it is receiving power too. this is a clear sign of having the wrong input selected on the monitor. thus, the "connector setting" needs to be switched from hdmi to display port on the monitor so it receives the signal from the pc, or the other way around (display port to hdmi).

N
NSPK
1/18/2024 10:26:00 AM

q 10. ans is d (in the target org: open deployment settings, click edit next to the source org. select allow inbound changes and save

M
mohamed abdo
9/1/2023 4:59:00 AM

very useful

T
Tom
3/18/2022 8:00:00 PM

i purchased this exam dumps from another website with way more questions but they were all invalid and outdate. this exam dumps was right to the point and all from recent exam. it was a hard pass.

E
Edrick GOP
10/24/2023 6:00:00 AM

it was a good experience and i got 90% in the 200-901 exam.

A
anonymous
8/10/2023 2:28:00 AM

hi please upload this

B
Bakir
7/6/2023 7:24:00 AM

please upload it

A
Aman
6/18/2023 1:27:00 PM

really need this dump. can you please help.

N
Neela Para
1/8/2024 6:39:00 PM

really good and covers many areas explaining the answer.

K
Karan Patel
8/15/2023 12:51:00 AM

yes, can you please upload the exam?

N
NISHAD
11/7/2023 11:28:00 AM

how many questions are there in these dumps?

P
Pankaj
7/3/2023 3:57:00 AM

hi team, please upload this , i need it.

D
DN
9/4/2023 11:19:00 PM

question 14 - run terraform import: this is the recommended best practice for bringing manually created or destroyed resources under terraform management. you use terraform import to associate an existing resource with a terraform resource configuration. this ensures that terraform is aware of the resource, and you can subsequently manage it with terraform.

Z
Zhiguang
8/19/2023 11:37:00 PM

please upload dump. thanks in advance.

D
deedee
12/23/2023 5:51:00 PM

great great

A
Asad Khan
11/1/2023 3:10:00 AM

answer 16 should be b your organizational policies require you to use virtual machines directly

S
Sale Danasabe
10/24/2023 5:21:00 PM

the question are kind of tricky of you didnt get the hnag on it.

L
Luis
11/16/2023 1:39:00 PM

can anyone tell me if this is for rhel8 or rhel9?

H
hik
1/19/2024 1:47:00 PM

good content

B
Blessious Phiri
8/15/2023 2:18:00 PM

pdb and cdb are critical to the database

Z
Zuned
10/22/2023 4:39:00 AM

till 104 questions are free, lets see how it helps me in my exam today.

M
Muhammad Rawish Siddiqui
12/3/2023 12:11:00 PM

question # 56, answer is true not false.

A
Amaresh Vashishtha
8/27/2023 1:33:00 AM

i would be requiring dumps to prepare for certification exam

A
Asad
9/8/2023 1:01:00 AM

very helpful

B
Blessious Phiri
8/13/2023 3:10:00 PM

control file is the heart of rman backup

S
Senthil
9/19/2023 5:47:00 AM

hi could you please upload the ibm c2090-543 dumps

H
Harry
6/27/2023 7:20:00 AM

appriciate if you could upload this again

A
Anonymous
7/10/2023 4:10:00 AM

please upload the dump

R
Raja
6/20/2023 5:30:00 AM

i found some questions answers mismatch with explanation answers. please properly update

D
Doora
11/30/2023 4:20:00 AM

nothing to mention

AI Tutor 👋 I’m here to help!