When setting up an AOS-CX VSX pair, which information does the Inter-Switch Protocol synchronize in the configuration created?
Answer(s): D
What is enabled by LLDP-MED?
Answer(s): A
LLDP-MED (Link Layer Discovery Protocol – Media Endpoint Discovery) allows switches to automatically assign and configure the correct Voice VLAN to VoIP phones, enabling seamless voice network deployments.
Refer to the output from a CX6100 switch:What is the correct detail that can be observed from the output above?
Answer(s): C
The Rx Power is shown as -40.00 dBm (0.0001 mW), which is extremely low and far below operational thresholds. Additionally, alarms indicate "Rx Power low alarm," "Rx Power low warning," and "Rx loss of signal," confirming that the link is down due to insufficient received signal strength.
What is true regarding 802.11k?
In a CX 8325, how do you configure the IP address 10.10.10.1 for the interface in default state for interface SVI 100 access and port 1/1/1?
Answer(s): B
To configure an SVI with IP address 10.10.10.1 on VLAN 100 and assign port 1/1/1 as an access port in VLAN 100 on the CX 8325, you configure the VLAN interface with the IP address and set the port as an access port for that VLAN. This enables both routing and switching for hosts connected to port 1/1/1 on VLAN 100.
Your customer currently has two (2) 5406 modular switches with MSTP configured as their core switches. You are proposing a new solution.What would you explain regarding the AOS-CX VSX switch pair when the Spanning-tree needs to be set up?
In AOS-CX VSX, to synchronize spanning-tree configuration (such as MSTP) between the VSX pair, you must enable vsx-sync stp-global in VSX mode. This ensures both switches have consistent spanning-tree settings, unlike classic modular switches where spanning-tree configuration is manually matched.
A customer has several hundred wireless IoT devices and is looking for an authentication solution that meets the following requirements:-The wireless traffic between the IoT devices and the Access Point must be encrypted -Unique passphrase per device -Use fingerprint information to perform role-based accessWhich solution will address the customer’s requirements? (Choose two.)
Answer(s): A,D
MPSK (Multi Pre-Shared Key) provides unique passphrases per device, ensuring each IoT device has an individual key and encrypted wireless communication.ClearPass Policy Manager enables advanced authentication (including fingerprinting), dynamic role-based access, and integrates with MPSK or RADIUS for per-device policies. Together, they meet all listed requirements: encryption, unique credentials, and fingerprint-based access control.
A large retail client is looking to generate a rich set of contextual data based on the location information of wireless clients in their stores.Which standard uses Round Trip Time (RTT) and Fine Time Measurements (FTM) to calculate the distance a client is from an AP?
802.11mc introduces Fine Timing Measurement (FTM), which uses Round Trip Time (RTT) calculations between the client and the AP to accurately determine the client’s distance from the access point, enabling precise location-based services and contextual data collection.
Share your comments for HP HPE7-A01 exam with other users:
i failed the cisa exam today. but i have found all the questions that were on the exam to be on this site.
in question 272 the right answer states that an autonomous acces point is "configured and managed by the wlc" but this is not what i have learned in my ccna course. is this a mistake? i understand that lightweight aps are managed by wlc while autonomous work as standalones on the wlan.
it was helpful
good question
really nice
please i need dumps for isc2 cybersecuity
ans is coldline i think
very helpful
can you please provide dumps so that it helps me more
thank you for providing me with the updated question and answers. this version has all the questions from the exam. i just saw them in my exam this morning. i passed my exam today.
how i can see exam questions?
can you please upload please?
question 75: option c is correct answer
please add this exam
please upoad
has anyone recently attended safe 6.0 certification? is it the samq question from here.
expository experience
52 should be b&c. controller failure has nothing to do with this type of issue. degraded state tells us its a raid issue, and if the os is missing then the bootable device isnt found. the only other consideration could be data loss but thats somewhat broad whereas b&c show understanding of the specific issues the question is asking about.
great help!!!
very useful tools
looks a good platform to prepare az-104
want to pass the exam
good resource
question 11 : d
only the free dumps will be enough for pass, or have to purchase the premium one. please suggest.
good questions. thanks.
good for practice.
great case study
the questions in this exam dumps is valid. i passed my test last monday. i only whish they had their pricing in inr instead of usd. but it is still worth it.
q40 the answer is not d, why are you giving incorrect answers? snapshot consolidation is used to merge the snapshot delta disk files to the vm base disk
thanks, very relevant
wrong answer. it is true not false.
please i need the mo-100 questions
very good use full
Keeping this site free takes real effort. We constantly battle automated scraping and unauthorized content copying. A quick account helps us protect the community and keep the site free.
To continue studying for your HPE7-A01, please sign in or create a free account.