When setting up an AOS-CX VSX pair, which information does the Inter-Switch Protocol synchronize in the configuration created?
Answer(s): D
What is enabled by LLDP-MED?
Answer(s): A
LLDP-MED (Link Layer Discovery Protocol – Media Endpoint Discovery) allows switches to automatically assign and configure the correct Voice VLAN to VoIP phones, enabling seamless voice network deployments.
Refer to the output from a CX6100 switch:What is the correct detail that can be observed from the output above?
Answer(s): C
The Rx Power is shown as -40.00 dBm (0.0001 mW), which is extremely low and far below operational thresholds. Additionally, alarms indicate "Rx Power low alarm," "Rx Power low warning," and "Rx loss of signal," confirming that the link is down due to insufficient received signal strength.
What is true regarding 802.11k?
In a CX 8325, how do you configure the IP address 10.10.10.1 for the interface in default state for interface SVI 100 access and port 1/1/1?
Answer(s): B
To configure an SVI with IP address 10.10.10.1 on VLAN 100 and assign port 1/1/1 as an access port in VLAN 100 on the CX 8325, you configure the VLAN interface with the IP address and set the port as an access port for that VLAN. This enables both routing and switching for hosts connected to port 1/1/1 on VLAN 100.
Your customer currently has two (2) 5406 modular switches with MSTP configured as their core switches. You are proposing a new solution.What would you explain regarding the AOS-CX VSX switch pair when the Spanning-tree needs to be set up?
In AOS-CX VSX, to synchronize spanning-tree configuration (such as MSTP) between the VSX pair, you must enable vsx-sync stp-global in VSX mode. This ensures both switches have consistent spanning-tree settings, unlike classic modular switches where spanning-tree configuration is manually matched.
A customer has several hundred wireless IoT devices and is looking for an authentication solution that meets the following requirements:-The wireless traffic between the IoT devices and the Access Point must be encrypted -Unique passphrase per device -Use fingerprint information to perform role-based accessWhich solution will address the customer’s requirements? (Choose two.)
Answer(s): A,D
MPSK (Multi Pre-Shared Key) provides unique passphrases per device, ensuring each IoT device has an individual key and encrypted wireless communication.ClearPass Policy Manager enables advanced authentication (including fingerprinting), dynamic role-based access, and integrates with MPSK or RADIUS for per-device policies. Together, they meet all listed requirements: encryption, unique credentials, and fingerprint-based access control.
A large retail client is looking to generate a rich set of contextual data based on the location information of wireless clients in their stores.Which standard uses Round Trip Time (RTT) and Fine Time Measurements (FTM) to calculate the distance a client is from an AP?
802.11mc introduces Fine Timing Measurement (FTM), which uses Round Trip Time (RTT) calculations between the client and the AP to accurately determine the client’s distance from the access point, enabling precise location-based services and contextual data collection.
Share your comments for HP HPE7-A01 exam with other users:
is it legit questions from sap certifications ?
question 16 should be b (changing the connector settings on the monitor) pc and monitor were powered on. the lights on the pc are on indicating power. the monitor is showing an error text indicating that it is receiving power too. this is a clear sign of having the wrong input selected on the monitor. thus, the "connector setting" needs to be switched from hdmi to display port on the monitor so it receives the signal from the pc, or the other way around (display port to hdmi).
q 10. ans is d (in the target org: open deployment settings, click edit next to the source org. select allow inbound changes and save
very useful
i purchased this exam dumps from another website with way more questions but they were all invalid and outdate. this exam dumps was right to the point and all from recent exam. it was a hard pass.
it was a good experience and i got 90% in the 200-901 exam.
hi please upload this
please upload it
really need this dump. can you please help.
really good and covers many areas explaining the answer.
yes, can you please upload the exam?
how many questions are there in these dumps?
hi team, please upload this , i need it.
question 14 - run terraform import: this is the recommended best practice for bringing manually created or destroyed resources under terraform management. you use terraform import to associate an existing resource with a terraform resource configuration. this ensures that terraform is aware of the resource, and you can subsequently manage it with terraform.
please upload dump. thanks in advance.
great great
answer 16 should be b your organizational policies require you to use virtual machines directly
the question are kind of tricky of you didnt get the hnag on it.
can anyone tell me if this is for rhel8 or rhel9?
good content
pdb and cdb are critical to the database
till 104 questions are free, lets see how it helps me in my exam today.
question # 56, answer is true not false.
i would be requiring dumps to prepare for certification exam
very helpful
control file is the heart of rman backup
hi could you please upload the ibm c2090-543 dumps
appriciate if you could upload this again
please upload the dump
i found some questions answers mismatch with explanation answers. please properly update
nothing to mention
knowable questions
very helpfull
good questions
Keeping this site free takes real effort. We constantly battle automated scraping and unauthorized content copying. A quick account helps us protect the community and keep the site free.
To continue studying for your HPE7-A01, please sign in or create a free account.