Amazon
Avaya
Checkpoint
Cisco®
CompTIA
CrowdStrike
EC-Council
EXIN
Fortinet
Google
ISC
ISC2
ITIL®
Juniper
Microsoft
Okta
Palo Alto Networks
Salesforce
All Vendors
  1. Home
  2. HP
  3. HPE7-A01

HP HPE7-A01 Exam (page: 3)
HP Aruba Certified Campus Access Professional
Updated on: 25-Dec-2025

Viewing Page 3 of 25
HPE7-A01 PDF 139 Questions

With the Aruba CX switch configuration, what is the first-hop protocol feature that is used for VSX L3 gateway as per Aruba recommendation?

  1. Active Gateway
  2. Active-Active VRRP
  3. SVI with vsx-sync
  4. VRRP

Answer(s): A

Explanation:

Active Gateway is the first-hop protocol feature that is used for VSX L3 gateway as per Aruba recommendation. Active Gateway is a feature that allows both VSX peers to act as active gateways for different subnets, eliminating the need for VRRP or other first-hop redundancy protocols. Active Gateway also provides fast failover and load balancing for L3 traffic across the VSX peers. The other options are incorrect because they are either not recommended or not supported by Aruba CX VSX.


Reference:

https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01- ch07.html https://www.arubanetworks.com/resource/aruba-virtual-switching-extension-vsx/



You are deploying a bonded 40 MHz wide channel What is the difference in the noise floor perceived by a client using this bonded channel as compared to an unbonded 20MHz wide channel?

  1. 2dB
  2. 3dB
  3. 8dB
  4. 4dB

Answer(s): B

Explanation:

The difference in the noise floor perceived by a client using a bonded 40 MHz wide channel as compared to an unbonded 20 MHz wide channel is 3 dB. The noise floor is the level of background noise in a given frequency band.
When two adjacent channels are bonded, the noise floor increases by 3 dB because the bandwidth is doubled and more noise is captured. The other options are incorrect because they do not reflect the correct relationship between bandwidth and noise floor.


Reference:

https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos- solutions/wlan-rf/rf-fundamentals.htm https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos- solutions/wlan-rf/channel-bonding.htm



When setting up an Aruba CX VSX pair, which information does the Inter-Switch Link Protocol configuration use in the configuration created?

  1. QSVI
  2. MAC tables
  3. UDLD
  4. RPVST+

Answer(s): B

Explanation:

The information that the Inter-Switch Link Protocol configuration uses in the configuration created is B. MAC tables.
The Inter-Switch Link Protocol (ISL) is a protocol that enables the synchronization of data and state information between two VSX peer switches. The ISL uses a version control mechanism and provides backward compatibility regarding VSX synchronization capabilities. The ISL can span long distances (transceiver dependent) and supports different speeds, such as 10G, 25G, 40G, or 100G1. One of the data components that the ISL synchronizes is the MAC table, which is a database that stores the MAC addresses of the devices connected to the switch and the corresponding ports or VLANs. The ISL ensures that both VSX peers have the same MAC table entries and can forward traffic to the correct destination. The ISL also synchronizes other data components, such as ARP table, LACP states for VSX LAGs, and MSTP states.



What is true regarding 802.11k?

  1. It extends radio measurements to define mechanisms for wireless network management of stations
  2. It reduces roaming delay by pre-authenticating clients with multiple target APs before a client roams to an AP
  3. It provides mechanisms for APs and clients to dynamically measure the available radio resources.
  4. It considers several metrics before it determines if a client should be steered to the 5GHz band, including client RSSI

Answer(s): C

Explanation:

802.11k is a standard that provides mechanisms for APs and clients to dynamically measure the available radio resources in a wireless network. 802.11k defines radio resource management (RRM) functions, such as neighbor reports, link measurement, beacon reports, etc., that allow APs and clients to exchange information about the RF environment and make better roaming decisions. The other options are incorrect because they describe other standards, such as 802.11r, 802.11v, or 802.11ax.


Reference:

https://www.arubanetworks.com/assets/wp/WP_WiFi6.pdf https://www.arubanetworks.com/assets/ds/DS_AP510Series.pdf



Your customer is interested in hearing more about how roles can help keep consistent policy enforcement in a distributed overlay fabric How would you explain this concept to them''

  1. Group Based Policy ID is applied on egress VTEP after device authentication and policy is enforced on ingress VTEP
  2. Role-based policies are tied to IP addresses which have an advantage over IP-based policies and role names are sent between VTEPs
  3. Group Based Policy ID is applied on ingress VTEP after device authentication and policy is enforced on egress VTEP
  4. Role-based policies enhance User Based Tunneling across the campus network and the policy traffic is protected with iPsec

Answer(s): C

Explanation:

This is the correct explanation of how roles can help keep consistent policy enforcement in a distributed overlay fabric. Roles are used to assign group based policy IDs (GBPs) to devices after they authenticate with ClearPass or a local database. GBPs are then used to tag the traffic from the devices and send them to the ingress VTEP, which applies the GBP on the VXLAN header. The egress VTEP then enforces the policy based on the GBP and the destination device. The other options are incorrect because they either do not describe the correct sequence of events or do not use the correct terms.


Reference:

https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200- 6728/bk01-ch03.html https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200- 6728/bk01-ch05.html



Viewing Page 3 of 25



Share your comments for HP HPE7-A01 exam with other users:

alaska 10/24/2023 5:48:00 AM

i scored 87% on the az-204 exam. thanks! i always trust
GERMANY


nnn 7/9/2023 11:09:00 PM

good need more
Anonymous


User-sfdc 12/29/2023 7:21:00 AM

sample questions seems good
Anonymous


Tamer dam 8/4/2023 10:21:00 AM

huawei is ok
UNITED STATES


YK 12/11/2023 1:10:00 AM

good one nice
JAPAN


de 8/28/2023 2:38:00 AM

please continue
GERMANY


DMZ 6/25/2023 11:56:00 PM

this exam dumps just did the job. i donot want to ruffle your feathers but your exam dumps and mock test engine is amazing.
UNITED KINGDOM


Jose 8/30/2023 6:14:00 AM

nice questions
PORTUGAL


Tar01 7/24/2023 7:07:00 PM

the explanation are really helpful
Anonymous


DaveG 12/15/2023 4:50:00 PM

just passed my exam yesterday on my first attempt. these dumps were extremely helpful in passing first time. the questions were very, very similar to these questions!
Anonymous


A.K. 6/30/2023 6:34:00 AM

cosmos db is paas not saas
Anonymous


S Roychowdhury 6/26/2023 5:27:00 PM

what is the percentage of common questions in gcp exam compared to 197 dump questions? are they 100% matching with real gcp exam?
Anonymous


Bella 7/22/2023 2:05:00 AM

not able to see questions
Anonymous


Scott 9/8/2023 7:19:00 AM

by far one of the best sites for free questions. i have pass 2 exams with the help of this website.
CANADA


donald 8/19/2023 11:05:00 AM

excellent question bank.
Anonymous


Ashwini 8/22/2023 5:13:00 AM

it really helped
Anonymous


sk 5/13/2023 2:07:00 AM

excelent material
INDIA


Christopher 9/5/2022 10:54:00 PM

the new versoin of this exam which i downloaded has all the latest questions from the exam. i only saw 3 new questions in the exam which was not in this dump.
CANADA


Sam 9/7/2023 6:51:00 AM

question 8 - can cloudtrail be used for storing jobs? based on aws - aws cloudtrail is used for governance, compliance and investigating api usage across all of our aws accounts. every action that is taken by a user or script is an api call so this is logged to [aws] cloudtrail. something seems incorrect here.
UNITED STATES


Tanvi Rajput 8/14/2023 10:55:00 AM

question 13 tda - c01 answer : quick table calculation -> percentage of total , compute using table down
UNITED KINGDOM


PMSAGAR 9/19/2023 2:48:00 AM

pls share teh dump
UNITED STATES


zazza 6/16/2023 10:47:00 AM

question 44 answer is user risk
ITALY


Prasana 6/23/2023 1:59:00 AM

please post the questions for preparation
Anonymous


test user 9/24/2023 3:15:00 AM

thanks for the questions
AUSTRALIA


Draco 7/19/2023 5:34:00 AM

please reopen it now ..its really urgent
UNITED STATES


Megan 4/14/2023 5:08:00 PM

these practice exam questions were exactly what i needed. the variety of questions and the realistic exam-like environment they created helped me assess my strengths and weaknesses. i felt more confident and well-prepared on exam day, and i owe it to this exam dumps!
UNITED KINGDOM


abdo casa 8/9/2023 6:10:00 PM

thank u it very instructuf
Anonymous


Danny 1/15/2024 9:10:00 AM

its helpful?
INDIA


hanaa 10/3/2023 6:57:00 PM

is this dump still valid???
Anonymous


Georgio 1/19/2024 8:15:00 AM

question 205 answer is b
Anonymous


Matthew Dievendorf 5/30/2023 9:37:00 PM

question 39, should be answer b, directions stated is being sudneted from /21 to a /23. a /23 has 512 ips so 510 hosts. and can make 4 subnets out of the /21
Anonymous


Adhithya 8/11/2022 12:27:00 AM

beautiful test engine software and very helpful. questions are same as in the real exam. i passed my paper.
UNITED ARAB EMIRATES


SuckerPumch88 4/25/2022 10:24:00 AM

the questions are exactly the same in real exam. just make sure not to answer all them correct or else they suspect you are cheating.
UNITED STATES


soheib 7/24/2023 7:05:00 PM

question: 78 the right answer i think is d not a
Anonymous