VMware NSX 4.X Professional V2 2V0-41.24 Dumps in PDF

Free VMware 2V0-41.24 Real Questions (page: 12)

An administrator has connected two virtual machines on the same overlay segment. Ping between both virtual machines is successful.
What type of network boundary does this represent?

  1. Layer 2 bridge
  2. Layer 2 broadcast domain
  3. Layer 2 VPN
  4. Layer 3 route

Answer(s): B

Explanation:

When two virtual machines are connected on the same overlay segment, they are part of the same Layer 2 broadcast domain. In this case, the communication between the two VMs is happening within the same broadcast domain, which means that broadcast traffic can be sent to all devices on the segment. Since the ping is successful, the two VMs can communicate directly over Layer 2 without needing routing.



What are two supported host switch modes? (Choose two.)

  1. Overlay Datapath
  2. Secure Datapath
  3. Standard Datapath
  4. Enhanced Datapath
  5. DPDK Datapath

Answer(s): C,D

Explanation:

Standard Datapath: This is the traditional mode used by the NSX host switch. It is typically used in environments where performance requirements are standard and no special acceleration techniques are needed.
Enhanced Datapath: This mode is designed to improve performance and provide better scalability, especially for environments with higher traffic loads or more demanding applications. It can provide better performance in certain scenarios by improving packet processing efficiency.



Which is an advantage of an L2 VPN in an NSX 4.x environment?

  1. Achieve better performance
  2. Use the same broadcast domain
  3. Enables Multi-Cloud solutions
  4. Enables VM mobility with re-IP

Answer(s): B

Explanation:

An L2 VPN (Layer 2 VPN) in an NSX 4.x environment allows you to extend a Layer 2 network across different sites or data centers. This enables the connected environments to share the same broadcast domain, meaning that broadcast traffic can be transmitted between sites as if they were on the same local network. This is particularly useful for scenarios where you need to maintain Layer 2 connectivity across geographically dispersed locations.



Which two steps must an NSX administrator take to integrate VMware Identity Manager in NSX to support role-based access control? (Choose two.)

  1. Create a SAML authentication in VMware Identity Manager using the NSX Manager FQDN.
  2. Add NSX Manager as a Service Provider (SP) in VMware Identity Manager.
  3. Enter the Identity Provider (IdP) metadata URL in NSX Manager.
  4. Enter the service URL, Client Secret, and SSL thumbprint in NSX Manager.
  5. Create an OAuth 2.0 client in VMware Identity Manager.

Answer(s): B,C

Explanation:

Adding NSX Manager as a Service Provider (SP) in VMware Identity Manager is necessary to enable SAML-based single sign-on (SSO), which allows VMware Identity Manager to manage and authenticate users accessing NSX.
Entering the Identity Provider (IdP) metadata URL in NSX Manager is required to establish a connection between NSX and VMware Identity Manager, enabling NSX to use VMware Identity Manager as the IdP for authentication.



Which of the two following characteristics about NAT64 are true? (Choose two.)

  1. NAT64 requires the Tier-1 gateway to be configured in active-active mode.
  2. NAT64 is stateless and requires gateways to be deployed in active-standby mode.
  3. NAT64 is supported on Tier-0 and Tier-1 gateways.
  4. NAT64 is supported on Tier-1 gateways only.
  5. NAT64 requires the Tier-1 gateway to be configured in active-standby mode.

Answer(s): C,E

Explanation:

NAT64 is supported on both Tier-0 and Tier-1 gateways, allowing for IPv6-to-IPv4 address translation at different gateway levels within NSX.
NAT64 requires the Tier-1 gateway to be configured in active-standby mode, as this configuration ensures stateful translation and consistency for IPv6-to-IPv4 traffic handling.



Share your comments for VMware 2V0-41.24 exam with other users:

A
Ali Azam
12/7/2023 1:51:00 AM

really helped with preparation of my scrum exam

J
Jerman
9/29/2023 8:46:00 AM

very informative and through explanations

J
Jimmy
11/4/2023 12:11:00 PM

prep for exam

A
Abhi
9/19/2023 1:22:00 PM

thanks for helping us

M
mrtom33
11/20/2023 4:51:00 AM

i prepared for the eccouncil 350-401 exam. i scored 92% on the test.

J
JUAN
6/28/2023 2:12:00 AM

aba questions to practice

L
LK
1/2/2024 11:56:00 AM

great content

S
Srijeeta
10/8/2023 6:24:00 AM

how do i get the remaining questions?

J
Jovanne
7/26/2022 11:42:00 PM

well formatted pdf and the test engine software is free. well worth the money i sept.

C
CHINIMILLI SATISH
8/29/2023 6:22:00 AM

looking for 1z0-116

P
Pedro Afonso
1/15/2024 8:01:00 AM

in question 22, shouldnt be in the data (option a) layer?

P
Pushkar
11/7/2022 12:12:00 AM

the questions are incredibly close to real exam. you people are amazing.

A
Ankit S
11/13/2023 3:58:00 AM

q15. answer is b. simple

S
S. R
12/8/2023 9:41:00 AM

great practice

M
Mungara
3/14/2023 12:10:00 AM

thanks to this exam dumps, i felt confident and passed my exam with ease.

A
Anonymous
7/25/2023 2:55:00 AM

need 1z0-1105-22 exam

N
Nigora
5/31/2022 10:05:00 PM

this is a beautiful tool. passed after a week of studying.

A
Av dey
8/16/2023 2:35:00 PM

can you please upload the dumps for 1z0-1096-23 for oracle

M
Mayur Shermale
11/23/2023 12:22:00 AM

its intresting, i would like to learn more abouth this

J
JM
12/19/2023 2:23:00 PM

q252: dns poisoning is the correct answer, not locator redirection. beaconing is detected from a host. this indicates that the system has been infected with malware, which could be the source of local dns poisoning. location redirection works by either embedding the redirection in the original websites code or having a user click on a url that has an embedded redirect. since users at a different office are not getting redirected, it isnt an embedded redirection on the original website and since the user is manually typing in the url and not clicking a link, it isnt a modified link.

F
Freddie
12/12/2023 12:37:00 PM

helpful dump questions

D
Da Costa
8/25/2023 7:30:00 AM

question 423 eigrp uses metric

B
Bsmaind
8/20/2023 9:22:00 AM

hello nice dumps

B
beau
1/12/2024 4:53:00 PM

good resource for learning

S
Sandeep
12/29/2023 4:07:00 AM

very useful

K
kevin
9/29/2023 8:04:00 AM

physical tempering techniques

B
Blessious Phiri
8/15/2023 4:08:00 PM

its giving best technical knowledge

T
Testbear
6/13/2023 11:15:00 AM

please upload

S
shime
10/24/2023 4:23:00 AM

great question with explanation thanks!!

T
Thembelani
5/30/2023 2:40:00 AM

does this exam have lab sections?

S
Shin
9/8/2023 5:31:00 AM

please upload

P
priti kagwade
7/22/2023 5:17:00 AM

please upload the braindump for .net

R
Robe
9/27/2023 8:15:00 PM

i need this exam 1z0-1107-2. please.

C
Chiranthaka
9/20/2023 11:22:00 AM

very useful!

AI Tutor 👋 I’m here to help!