VMware NSX 4.X Professional V2 2V0-41.24 Dumps in PDF

Free VMware 2V0-41.24 Real Questions (page: 11)

An administrator has connected two virtual machines on the same overlay segment. Ping between both virtual machines is successful.
What type of network boundary does this represent?

  1. Layer 2 bridge
  2. Layer 2 broadcast domain
  3. Layer 2 VPN
  4. Layer 3 route

Answer(s): B

Explanation:

When two virtual machines are connected on the same overlay segment, they are part of the same Layer 2 broadcast domain. In this case, the communication between the two VMs is happening within the same broadcast domain, which means that broadcast traffic can be sent to all devices on the segment. Since the ping is successful, the two VMs can communicate directly over Layer 2 without needing routing.



What are two supported host switch modes? (Choose two.)

  1. Overlay Datapath
  2. Secure Datapath
  3. Standard Datapath
  4. Enhanced Datapath
  5. DPDK Datapath

Answer(s): C,D

Explanation:

Standard Datapath: This is the traditional mode used by the NSX host switch. It is typically used in environments where performance requirements are standard and no special acceleration techniques are needed.
Enhanced Datapath: This mode is designed to improve performance and provide better scalability, especially for environments with higher traffic loads or more demanding applications. It can provide better performance in certain scenarios by improving packet processing efficiency.



Which is an advantage of an L2 VPN in an NSX 4.x environment?

  1. Achieve better performance
  2. Use the same broadcast domain
  3. Enables Multi-Cloud solutions
  4. Enables VM mobility with re-IP

Answer(s): B

Explanation:

An L2 VPN (Layer 2 VPN) in an NSX 4.x environment allows you to extend a Layer 2 network across different sites or data centers. This enables the connected environments to share the same broadcast domain, meaning that broadcast traffic can be transmitted between sites as if they were on the same local network. This is particularly useful for scenarios where you need to maintain Layer 2 connectivity across geographically dispersed locations.



Which two steps must an NSX administrator take to integrate VMware Identity Manager in NSX to support role-based access control? (Choose two.)

  1. Create a SAML authentication in VMware Identity Manager using the NSX Manager FQDN.
  2. Add NSX Manager as a Service Provider (SP) in VMware Identity Manager.
  3. Enter the Identity Provider (IdP) metadata URL in NSX Manager.
  4. Enter the service URL, Client Secret, and SSL thumbprint in NSX Manager.
  5. Create an OAuth 2.0 client in VMware Identity Manager.

Answer(s): B,C

Explanation:

Adding NSX Manager as a Service Provider (SP) in VMware Identity Manager is necessary to enable SAML-based single sign-on (SSO), which allows VMware Identity Manager to manage and authenticate users accessing NSX.
Entering the Identity Provider (IdP) metadata URL in NSX Manager is required to establish a connection between NSX and VMware Identity Manager, enabling NSX to use VMware Identity Manager as the IdP for authentication.



Which of the two following characteristics about NAT64 are true? (Choose two.)

  1. NAT64 requires the Tier-1 gateway to be configured in active-active mode.
  2. NAT64 is stateless and requires gateways to be deployed in active-standby mode.
  3. NAT64 is supported on Tier-0 and Tier-1 gateways.
  4. NAT64 is supported on Tier-1 gateways only.
  5. NAT64 requires the Tier-1 gateway to be configured in active-standby mode.

Answer(s): C,E

Explanation:

NAT64 is supported on both Tier-0 and Tier-1 gateways, allowing for IPv6-to-IPv4 address translation at different gateway levels within NSX.
NAT64 requires the Tier-1 gateway to be configured in active-standby mode, as this configuration ensures stateful translation and consistency for IPv6-to-IPv4 traffic handling.



Share your comments for VMware 2V0-41.24 exam with other users:

H
Harry
6/27/2023 7:20:00 AM

appriciate if you could upload this again

A
Anonymous
7/10/2023 4:10:00 AM

please upload the dump

R
Raja
6/20/2023 5:30:00 AM

i found some questions answers mismatch with explanation answers. please properly update

D
Doora
11/30/2023 4:20:00 AM

nothing to mention

D
deally
1/19/2024 3:41:00 PM

knowable questions

S
Sonia
7/23/2023 4:03:00 PM

very helpfull

B
binEY
10/6/2023 5:15:00 AM

good questions

N
Neha
9/28/2023 1:58:00 PM

its helpful

D
Desmond
1/5/2023 9:11:00 PM

i just took my oracle exam and let me tell you, this exam dumps was a lifesaver! without them, iam not sure i would have passed. the questions were tricky and the answers were obscure, but the exam dumps had everything i needed. i would recommend to anyone looking to pass their oracle exams with flying colors (and a little bit of cheating) lol.

D
Davidson OZ
9/9/2023 6:37:00 PM

22. if you need to make sure that one computer in your hot-spot network can access the internet without hot-spot authentication, which menu allows you to do this? answer is ip binding and not wall garden. wall garden allows specified websites to be accessed with users authentication to the hotspot

3
381
9/2/2023 4:31:00 PM

is question 1 correct?

L
Laurent
10/6/2023 5:09:00 PM

good content

S
Sniper69
5/9/2022 11:04:00 PM

manged to pass the exam with this exam dumps.

D
Deepak
12/27/2023 2:37:00 AM

good questions

D
dba
9/23/2023 3:10:00 AM

can we please have the latest exam questions?

P
Prasad
9/29/2023 7:27:00 AM

please help with jn0-649 latest dumps

G
GTI9982
7/31/2023 10:15:00 PM

please i need this dump. thanks

E
Elton Riva
12/12/2023 8:20:00 PM

i have to take the aws certified developer - associate dva-c02 in the next few weeks and i wanted to know if the questions on your website are the same as the official exam.

B
Berihun Desalegn Wonde
7/13/2023 11:00:00 AM

all questions are more important

G
gr
7/2/2023 7:03:00 AM

ques 4 answer should be c ie automatically recover from failure

R
RS
7/27/2023 7:17:00 AM

very very useful page

B
Blessious Phiri
8/12/2023 11:47:00 AM

the exams are giving me an eye opener

A
AD
10/22/2023 9:08:00 AM

3rd so far, need to cover more

M
Matt
11/18/2023 2:32:00 AM

aligns with the pecd notes

S
Sri
10/15/2023 4:38:00 PM

question 4: b securityadmin is the correct answer. https://docs.snowflake.com/en/user-guide/security-access-control-overview#access-control-framework

H
H.T.M. D
6/25/2023 2:55:00 PM

kindly please share dumps

S
Satish
11/6/2023 4:27:00 AM

it is very useful, thank you

C
Chinna
7/30/2023 8:37:00 AM

need safe rte dumps

1
1234
6/30/2023 3:40:00 AM

can you upload the cis - cpg dumps

D
Did
1/12/2024 3:01:00 AM

q6 = 1. download odt application 2. create a configuration file (xml) 3. setup.exe /download to download the installation files 4. setup.exe /configure to deploy the application

J
John
10/12/2023 12:30:00 PM

great material

D
Dinesh
8/1/2023 2:26:00 PM

could you please upload sap c_arsor_2302 questions? it will be very much helpful.

L
LBert
6/19/2023 10:23:00 AM

vraag 20c: rsa veilig voor symmtrische cryptografie? antwoord c is toch fout. rsa is voor asymmetrische cryptogafie??

G
g
12/22/2023 1:51:00 PM

so far good

AI Tutor 👋 I’m here to help!