VMware NSX 4.X Professional V2 2V0-41.24 Dumps in PDF

Free VMware 2V0-41.24 Real Questions (page: 14)

An administrator has connected two virtual machines on the same overlay segment. Ping between both virtual machines is successful.
What type of network boundary does this represent?

  1. Layer 2 bridge
  2. Layer 2 broadcast domain
  3. Layer 2 VPN
  4. Layer 3 route

Answer(s): B

Explanation:

When two virtual machines are connected on the same overlay segment, they are part of the same Layer 2 broadcast domain. In this case, the communication between the two VMs is happening within the same broadcast domain, which means that broadcast traffic can be sent to all devices on the segment. Since the ping is successful, the two VMs can communicate directly over Layer 2 without needing routing.



What are two supported host switch modes? (Choose two.)

  1. Overlay Datapath
  2. Secure Datapath
  3. Standard Datapath
  4. Enhanced Datapath
  5. DPDK Datapath

Answer(s): C,D

Explanation:

Standard Datapath: This is the traditional mode used by the NSX host switch. It is typically used in environments where performance requirements are standard and no special acceleration techniques are needed.
Enhanced Datapath: This mode is designed to improve performance and provide better scalability, especially for environments with higher traffic loads or more demanding applications. It can provide better performance in certain scenarios by improving packet processing efficiency.



Which is an advantage of an L2 VPN in an NSX 4.x environment?

  1. Achieve better performance
  2. Use the same broadcast domain
  3. Enables Multi-Cloud solutions
  4. Enables VM mobility with re-IP

Answer(s): B

Explanation:

An L2 VPN (Layer 2 VPN) in an NSX 4.x environment allows you to extend a Layer 2 network across different sites or data centers. This enables the connected environments to share the same broadcast domain, meaning that broadcast traffic can be transmitted between sites as if they were on the same local network. This is particularly useful for scenarios where you need to maintain Layer 2 connectivity across geographically dispersed locations.



Which two steps must an NSX administrator take to integrate VMware Identity Manager in NSX to support role-based access control? (Choose two.)

  1. Create a SAML authentication in VMware Identity Manager using the NSX Manager FQDN.
  2. Add NSX Manager as a Service Provider (SP) in VMware Identity Manager.
  3. Enter the Identity Provider (IdP) metadata URL in NSX Manager.
  4. Enter the service URL, Client Secret, and SSL thumbprint in NSX Manager.
  5. Create an OAuth 2.0 client in VMware Identity Manager.

Answer(s): B,C

Explanation:

Adding NSX Manager as a Service Provider (SP) in VMware Identity Manager is necessary to enable SAML-based single sign-on (SSO), which allows VMware Identity Manager to manage and authenticate users accessing NSX.
Entering the Identity Provider (IdP) metadata URL in NSX Manager is required to establish a connection between NSX and VMware Identity Manager, enabling NSX to use VMware Identity Manager as the IdP for authentication.



Which of the two following characteristics about NAT64 are true? (Choose two.)

  1. NAT64 requires the Tier-1 gateway to be configured in active-active mode.
  2. NAT64 is stateless and requires gateways to be deployed in active-standby mode.
  3. NAT64 is supported on Tier-0 and Tier-1 gateways.
  4. NAT64 is supported on Tier-1 gateways only.
  5. NAT64 requires the Tier-1 gateway to be configured in active-standby mode.

Answer(s): C,E

Explanation:

NAT64 is supported on both Tier-0 and Tier-1 gateways, allowing for IPv6-to-IPv4 address translation at different gateway levels within NSX.
NAT64 requires the Tier-1 gateway to be configured in active-standby mode, as this configuration ensures stateful translation and consistency for IPv6-to-IPv4 traffic handling.



Share your comments for VMware 2V0-41.24 exam with other users:

D
Daryl
8/1/2022 11:33:00 PM

i really like the support team in this website. they are fast in communication and very helpful.

C
Curtis Nakawaki
6/29/2023 9:13:00 PM

a good contemporary exam review

X
x-men
5/23/2023 1:02:00 AM

q23, its an array, isnt it? starts with [ and end with ]. its an array of objects, not object.

A
abuti
7/21/2023 6:24:00 PM

cool very helpfull

K
Krishneel
3/17/2023 10:34:00 AM

i just passed. this exam dumps is the same one from prepaway and examcollection. it has all the real test questions.

R
Regor
12/4/2023 2:01:00 PM

is this a valid prince2 practitioner dumps?

A
asl
9/14/2023 3:59:00 PM

all are relatable questions

S
Siyya
1/19/2024 8:30:00 PM

might help me to prepare for the exam

T
Ted
6/21/2023 11:11:00 PM

just paid and downlaod the 2 exams using the 50% sale discount. so far i was able to download the pdf and the test engine. all looks good.

P
Paul K
11/27/2023 2:28:00 AM

i think it should be a,c. option d goes against the principle of building anything custom unless there are no work arounds available

P
ph
6/16/2023 12:41:00 AM

very legible

S
sephs2001
7/31/2023 10:42:00 PM

is this exam accurate or helpful?

A
ash
7/11/2023 3:00:00 AM

please upload dump, i have exam in 2 days

S
Sneha
8/17/2023 6:29:00 PM

this is useful

S
sachin
12/27/2023 2:45:00 PM

question 232 answer should be perimeter not netowrk layer. wrong answer selected

T
tomAws
7/18/2023 5:05:00 AM

nice questions

R
Rahul
6/11/2023 2:07:00 AM

hi team, could you please provide this dump ?

T
TeamOraTech
12/5/2023 9:49:00 AM

very helpful to clear the exam and understand the concept.

C
Curtis
7/12/2023 8:20:00 PM

i think it is great that you are helping people when they need it. thanks.

S
sam
7/17/2023 6:22:00 PM

cannot evaluate yet

N
nutz
7/20/2023 1:54:00 AM

a laptops wireless antenna is most likely located in the bezel of the lid

R
rajesh soni
1/17/2024 6:53:00 AM

good examplae to learn basic

T
Tanya
10/25/2023 7:07:00 AM

this is useful information

N
Nasir Mahmood
12/11/2023 7:32:00 AM

looks usefull

J
Jason
9/30/2023 1:07:00 PM

question 81 should be c.

T
TestPD1
8/10/2023 12:22:00 PM

question 18 : response isnt a ?

A
ally
8/19/2023 5:31:00 PM

plaese add questions

D
DIA
10/7/2023 5:59:00 AM

is dumps still valid ?

A
Annie
7/7/2023 8:33:00 AM

thanks for this

A
arnie
9/17/2023 6:38:00 AM

please upload questions

T
Tanuj Rana
7/22/2023 2:33:00 AM

please upload the question dump for professional machinelearning

F
Future practitioner
8/10/2023 1:26:00 PM

question 4 answer is c. this site shows the correct answer as b. "adopt a consumption model" is clearly a cost optimization design principle. looks like im done using this site to study!!!

A
Ace
8/3/2023 10:37:00 AM

number 52 answer is d

N
Nathan
12/17/2023 12:04:00 PM

just started preparing for my exam , and this site is so much help

AI Tutor 👋 I’m here to help!