Amazon
Avaya
Cisco
CompTIA
CrowdStrike
EC-Council
EXIN
Fortinet
Google
ISC
ISC2
ITIL
Juniper
Microsoft
NVIDIA
Okta
Palo Alto Networks
Salesforce
SAP
ServiceNow
All Vendors
  1. Home
  2. HP
  3. HPE7-A07

HP HPE7-A07 Exam (page: 1)
HP Aruba Certified Campus Access Mobility Expert Written
Updated on: 31-Mar-2026

Viewing Page 1 of 15
HPE7-A07 PDF 70 Questions

A customer is evaluating device profiles on a CX 6300 switch. The test device has the following attribute:



· MAC address=81:cd:93:13:ab:31
The test device needs to be assigned the "lot-prod'' role, in addition the "lot-default" role must be applied for any other device connected lo interface 1/1/1. This is a lab environment with no configuration of any external authentication server for the test. Given the configuration example, what is required to meet this testing requirement?

  1. Enter the command "pot-access device-profile mode block-until-profile-applied"" for interface 1/1/1.
  2. Enter the command "port-access fallback-role lot-default globally
  3. Enter the command "port-access onboarding-method precedence" to set device profiles with a lower precedence.
  4. Enter the command "port-access device-profile mode block-until-profile-applied" globally.

Answer(s): B

Explanation:

The fallback role is used as a default role in the absence of a specified role or when an authentication server is not available. Given the scenario, where the test device with MAC address 81:cd:93:13:ab:31 needs to be assigned to "iot-prod" and other devices to "iot-default", and considering there is no external authentication server configured for the test, the appropriate action would be to set a global fallback role that applies to all devices connecting to the network. This ensures that any device that does not match the specific device profile will inherit the "iot-default" role. Since the configuration for a specific MAC address (81:cd:93:xx:xx:xx) to associate with the "iot- prod" role is already in place, setting the fallback role globally accommodates the requirement for other devices.



Exhibit.



Which user role will be assigned when a voice client tries to connect for the first time, but the RADIUS server is unavailable?

  1. CRITICAl_AUTH
  2. DEFAULT_AUTH
  3. CRIT1CAL_V0ICE
  4. PRE_AUTH

Answer(s): C

Explanation:

In the provided configuration for interface 1/1/7, there are roles specified for different scenarios concerning authentication.
When a voice client attempts to connect and the RADIUS server is unreachable, the role that is assigned is the one specified as the "critical-voice-role". In this case, the "CRITICAL_VOICE" role is configured to be assigned under such circumstances, ensuring that voice clients receive appropriate network access permissions even when the RADIUS server is not available to authenticate them.



You configured a WPA3-SAE with the following MAC Authentication Role Mapping in Cloud Authentication and Policy:



With further default settings assume a new Android phone is connected to the network.
Which role will the client be assigned after connecting for the first time?

  1. byod
  2. client will be rejected network access
  3. lot-local
  4. unmatched-device

Answer(s): D

Explanation:

The configuration shown in the third exhibit details a client role mapping that associates different client profile tags with specific client roles.
When a new device, such as an Android phone, connects to the network, it will be profiled and assigned a role based on the mappings defined. If the device does not match any predefined profiles, it would be assigned the "unmatched-device" role. This is under the assumption that default settings are in place and the client does not match the criteria for any of the specific roles like "byod", "iot-internet", or "iot-local". Therefore, an Android phone connecting for the first time and not matching any specific profile tag would be assigned to the "unmatched-device" role.



You are testing the use of the automated port-access role configuration process using RadSec authentication over VXLAN. During your testing you observed that the RadSec connection will fan during the digital certificate exchange
What would be the cause of this Issue?

  1. The RadSec server was defined on the switch using an IPv6 address that was unreachable
  2. Tracking mode was set to "dead-only", and the RadSec server was marked as unreachable.
  3. The switch is configured to establish a TLS connection with a proxy server, not the radius server.
  4. The RADIUS TCP packets are Being dropped and the TLS tunnel is not established.

Answer(s): D

Explanation:

During the testing of RadSec authentication over VXLAN, if the RadSec connection fails during the digital certificate exchange, it typically indicates an issue with the establishment of the TLS tunnel, which is required for RadSec's secure communication. The failure of TLS tunnel establishment can occur due to RADIUS TCP packets being dropped, preventing the secure exchange of digital certificates necessary for RadSec authentication. The other options, such as IPv6 address reachability, tracking mode settings, and proxy server misconfiguration, are not directly related to the failure of the TLS tunnel establishment during the certificate exchange process



An OSPF router has learned a pain 10 an external network by Doth an E1 and an E2 advertisement Both routes have the same path cost Which path will the router prefer?

  1. The router will prefer the E1 path.
  2. The router will use Doth paths equally utilizing ECMP.
  3. The router will prefer the E2 path.
  4. Both routes will be suppressed until the path conflict has been resolved.

Answer(s): A

Explanation:

In OSPF, when a router learns about an external network through both E1 and E2 advertisements, and if both have the same path cost, the router will prefer the E1 path. This is because E1 routes consider both the external cost to reach the external network and the internal cost to reach the ASBR, providing a more comprehensive metric. E2 routes only consider the external cost and ignore the internal cost to the ASBR, which could potentially lead to suboptimal routing. Therefore, the router will choose the E1 path due to its more accurate representation of the total path cost.



Viewing Page 1 of 15



Share your comments for HP HPE7-A07 exam with other users:

ahmad hassan 9/6/2023 3:26:00 AM

pd1 with great experience
Anonymous


Žarko 9/5/2023 3:35:00 AM

@t it seems like azure service bus message quesues could be the best solution
UNITED KINGDOM


Shiji 10/15/2023 1:08:00 PM

helpful to check your understanding.
INDIA


Da Costa 8/27/2023 11:43:00 AM

question 128 the answer should be static not auto
Anonymous


bot 7/26/2023 6:45:00 PM

more comments here
UNITED STATES


Kaleemullah 12/31/2023 1:35:00 AM

great support to appear for exams
Anonymous


Bsmaind 8/20/2023 9:26:00 AM

useful dumps
Anonymous


Blessious Phiri 8/13/2023 8:37:00 AM

making progress
Anonymous


Nabla 9/17/2023 10:20:00 AM

q31 answer should be d i think
FRANCE


vladputin 7/20/2023 5:00:00 AM

is this real?
UNITED STATES


Nick W 9/29/2023 7:32:00 AM

q10: c and f are also true. q11: this is outdated. you no longer need ownership on a pipe to operate it
Anonymous


Naveed 8/28/2023 2:48:00 AM

good questions with simple explanation
UNITED STATES


cert 9/24/2023 4:53:00 PM

admin guide (windows) respond to malicious causality chains. when the cortex xdr agent identifies a remote network connection that attempts to perform malicious activity—such as encrypting endpoint files—the agent can automatically block the ip address to close all existing communication and block new connections from this ip address to the endpoint. when cortex xdrblocks an ip address per endpoint, that address remains blocked throughout all agent profiles and policies, including any host-firewall policy rules. you can view the list of all blocked ip addresses per endpoint from the action center, as well as unblock them to re-enable communication as appropriate. this module is supported with cortex xdr agent 7.3.0 and later. select the action mode to take when the cortex xdr agent detects remote malicious causality chains: enabled (default)—terminate connection and block ip address of the remote connection. disabled—do not block remote ip addresses. to allow specific and known s
Anonymous


Yves 8/29/2023 8:46:00 PM

very inciting
Anonymous


Miguel 10/16/2023 11:18:00 AM

question 5, it seems a instead of d, because: - care plan = case - patient = person account - product = product2;
SPAIN


Byset 9/25/2023 12:49:00 AM

it look like real one
Anonymous


Debabrata Das 8/28/2023 8:42:00 AM

i am taking oracle fcc certification test next two days, pls share question dumps
Anonymous


nITA KALE 8/22/2023 1:57:00 AM

i need dumps
Anonymous


CV 9/9/2023 1:54:00 PM

its time to comptia sec+
GREECE


SkepticReader 8/1/2023 8:51:00 AM

question 35 has an answer for a different question. i believe the answer is "a" because it shut off the firewall. "0" in registry data means that its false (aka off).
UNITED STATES


Nabin 10/16/2023 4:58:00 AM

helpful content
MALAYSIA


Blessious Phiri 8/15/2023 3:19:00 PM

oracle 19c is complex db
Anonymous


Sreenivas 10/24/2023 12:59:00 AM

helpful for practice
Anonymous


Liz 9/11/2022 11:27:00 PM

support team is fast and deeply knowledgeable. i appreciate that a lot.
UNITED STATES


Namrata 7/15/2023 2:22:00 AM

helpful questions
Anonymous


lipsa 11/8/2023 12:54:00 PM

thanks for question
Anonymous


Eli 6/18/2023 11:27:00 PM

the software is provided for free so this is a big change. all other sites are charging for that. also that fucking examtopic site that says free is not free at all. you are hit with a pay-wall.
EUROPEAN UNION


open2exam 10/29/2023 1:14:00 PM

i need exam questions nca 6.5 any help please ?
Anonymous


Gerald 9/11/2023 12:22:00 PM

just took the comptia cybersecurity analyst (cysa+) - wished id seeing this before my exam
UNITED STATES


ryo 9/10/2023 2:27:00 PM

very helpful
MEXICO


Jamshed 6/20/2023 4:32:00 AM

i need this exam
PAKISTAN


Roberto Capra 6/14/2023 12:04:00 PM

nice questions... are these questions the same of the exam?
Anonymous


Synt 5/23/2023 9:33:00 PM

need to view
UNITED STATES


Vey 5/27/2023 12:06:00 AM

highly appreciate for your sharing.
CAMBODIA