What is one use case for designing a 2-tier campus LAM instead of using a 3-tier?
Answer(s): A
A 2-tier campus LAN architecture, consisting of the core and access layers, is typically suitable for smaller campuses or networks with limited numbers of wiring closets. This simplified architecture eliminates the need for a dedicated aggregation layer, which is more common in larger, more complex network environments (the 3-tier architecture). In a small campus setting with only a few wiring closets, a 2-tier design can provide sufficient performance and scalability, reducing complexity and potentially lowering costs. This architecture allows for direct connectivity between the access layer, where end devices connect to the network, and the core layer, which routes traffic to and from the campus network. The use of a 2-tier architecture in such scenarios is driven by the network's size and the simplicity of its requirements, making it an efficient and effective choice.
A global furniture retail company called 'No-Stair Inc.' requests you design their new WLAN infrastructure for a global footprint. Each location of No-Stair Inc.' has a similar layout: three small manager offices, a warehouse, and a 'retail' are
Answer(s): B
An RF (Radio Frequency) survey report is crucial for WLAN design as it provides detailed information about the current wireless environment, including signal strengths, interference sources, coverage gaps, and the effectiveness of the existing WLAN infrastructure. For a company like 'No-Stair Inc.' that is planning to refresh its WLAN across a global footprint, understanding the current RF conditions in each location is essential. This information helps in designing a WLAN infrastructure that can meet the specific needs of different areas within the locations, such as the retail area and warehouse, ensuring optimal coverage, performance, and user experience. An RF survey report would allow the designer to make informed decisions regarding the placement of new access points, the selection of appropriate antennas, and the configuration of WLAN parameters to improve coverage and capacity while minimizing interference.
Answer(s): D
When upgrading a WLAN infrastructure, it's important to ensure that the existing wired network can support the new wireless access points (APs) in terms of connectivity and power (if using Power over Ethernet, PoE). For 'No-Stair Inc.,' which is planning a WLAN refresh without specific changes to the Wi-Fi or security requirements but potentially with new AP models and configurations, verifying the capacity of the wired network is crucial. The question about whether the existing wired network has enough drops (ethernet connections) for the upgraded Wi-Fi network addresses this concern. It's essential to ensure that there are sufficient ethernet ports available in the right locations to connect the new APs, and that these ports can provide the necessary power and data rates required by modern APs. This information will help in planning the deployment of the new APs, avoiding potential bottlenecks and ensuring that the upgraded WLAN can deliver the desired performance and coverage
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will be out of scope for this project. The customer is underserved by its existing L2-based network infrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge. The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.The customer is also planning on renovating the corporate office space in order to take advantage of "smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics, and other location-based servicesThe client has provided floorplans. wall density, and ceiling heights tor the wireless deployment in the carpeted office spaceWhat else will be needed to write an accurate bill of material? (Select two)
Answer(s): B,C
Ceiling construction details are essential for a wireless deployment because the material and structure of the ceiling can affect the propagation of wireless signals. Different materials can absorb or reflect RF signals differently, impacting coverage and signal strength. Understanding ceiling construction helps in planning the placement of access points for optimal coverage and performance. PoE (Power over Ethernet) port details are necessary to ensure that the wired network infrastructure can provide power to the access points and other PoE-enabled devices like VoIP phones and cameras. This information is critical for planning the power budget and ensuring that the network can support the power requirements of all connected devices, ensuring a stable and reliable network infrastructure.
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will be out of scope for this project. The customer is underserved by its existing L2-based network infrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge. The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.The customer is also planning on renovating the corporate office space in order to take advantage of "smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics,and other location-based servicesThe client is looking to utilize lower-cost Aruba OS-CX switches in their wiring closets. They calculate that each closet will need a stack or qty 6 POE (AT) and qty 0 Gigabit Ethernet switches stacked with low-cost OACs.Which series switch should you recommend?
Answer(s): C
The Aruba CX 6300F series is a suitable recommendation for the described scenario due to its performance, PoE capabilities, and cost-effectiveness for wiring closet deployments. The CX 6300F series offers the flexibility and scalability needed for modern network environments, supporting both wired and wireless connectivity demands. It provides advanced features such as stackability, high- density PoE options, and the capability to support dynamic segmentation, which is essential for separating and securing different types of network traffic, such as corporate data and guest Wi-Fi access. This series is designed to meet the needs of a full-stack wired and wireless network in a large, multi-story office building, providing the necessary infrastructure for both current and future network requirements.
Share your comments for HP HPE7-A03 exam with other users:
this is a good experience
hi everyone
waiting for the dump. please upload.
upload cks exam questions
awesome training material
where is dump
q. 289 - the correct answer should be b not d, since the question asks for the most secure way to provide access to a s3 bucket (a single one), and by principle of the least privilege you should not be giving access to all buckets.
please i need if possible h12-831,
good collection of questions and solution for pl500 certification
i would like to appear the exam.
i am very happy as i cleared my comptia a+ 220-1101 exam. i studied from as it has all exam dumps and mock tests available. i got 91% on the test.
need this dump
its really good to eventuate knowledge before appearing for the actual exam.
this is great
please i want the questions to pass the exam
i need to pass exam
great, i appreciate it.
please could you upload (isc)2 certified in cybersecurity (cc) exam questions
good questions, wrong answers
im preparing for exams
question no: 42 isnt azure vm an iaas solution? so, shouldnt the answer be "no"?
im study azure
i need this now
i took the aws saa-c03 test and scored 935/1000. it has all the exam dumps and important info.
good questions
well explained
i got the full version and it helped me pass the exam. pdf version is very good.
provide the download link, please
please upload thank.
please can you share 1z0-1055-22 dump pls
i will wait impatiently. thank youu
is it possible to clear the exam if we focus on only these 156 questions instead of 623 questions? kindly help!
really helped with preparation of my scrum exam
very informative and through explanations
Keeping this site free takes real effort. We constantly battle automated scraping and unauthorized content copying. A quick account helps us protect the community and keep the site free.
To continue studying for your HPE7-A03, please sign in or create a free account.