Fortinet NSE 5 - FortiNAC-F 7.6 Administrator NSE5_FNC_AD-7.6 Dumps in PDF

Free Fortinet NSE5_FNC_AD-7.6 Real Questions (page: 6)

An administrator has created several device profiling rules and evaluated all existing devices in the database. Some of the devices appear in the profiled devices view because they matched a rule, but they remain unknown and the registration column in the profiled devices view shows "No".

What is the most likely cause?

  1. The confirm device profiling rule option is not enabled.
  2. The devices match more than one device profiling rule.
  3. The device profiling rule has registration set to manual.
  4. The devices have persistent agents installed, and the point of connection has PA optimization enabled.

Answer(s): A

Explanation:

When the confirm device profiling rule option is not enabled, devices that match a profiling rule are identified and appear in the profiled devices view, but they are not automatically promoted from unknown to registered.
As a result, the devices remain in an unknown state and the registration column continues to show "No" despite
a successful rule match.



Where should you configure MAC notification traps on a supported switch?

  1. Only on ports that generate linkup and linkdown traps
  2. Only on ports defined as learned uplinks
  3. On all ports on the switch
  4. On all ports except uplink ports

Answer(s): C

Explanation:

MAC notification traps must be enabled on all ports of a supported switch so FortiNAC-F can receive MAC address learning and movement events regardless of where endpoints connect. This comprehensive coverage ensures accurate device discovery, tracking, and enforcement across the entire switch.



Refer to the exhibit.



What will occur if CA-2 fails?

  1. CA-1 and CA-3 will operate as a 1+1 HA cluster with CA-3 acting as a hot standby.
  2. CA-3 will continue to operate as a secondary in an N+1 HA configuration.
  3. CA-3 will be promoted to a primary and share management responsibilities with CA-1.
  4. CA-3 will be promoted to a primary and FortiNAC-F manager will load balance between CA-1 and CA-3.

Answer(s): D

Explanation:

In an N+1 HA architecture managed by a FortiNAC-F Manager, if a primary CA fails, an available secondary CA is automatically promoted to primary. After CA-2 fails, CA-3 is promoted to a primary role, and the FortiNAC-F Manager load balances management and enforcement responsibilities between the remaining primary CAs, CA-1 and CA-3.



During an evaluation of state-based enforcement, an administrator discovers that ports that should not be under enforcement have been added to enforcement groups.

In which view would the administrator be able to identify who added the ports to the groups?

  1. The Admin Auditing view
  2. The Event Management view
  3. The Port Changes view
  4. The Security Events view

Answer(s): A

Explanation:

The Admin Auditing view records administrative actions performed within FortiNAC-F, including configuration changes such as adding ports to enforcement groups. This view allows administrators to identify which user made the change and when it occurred.



Refer to the exhibit.



An administrator wants to use FortiNAC-F to automatically provision printers throughout their organization.
Each building uses its own local VLAN for printers.

Which FortiNAC-F feature would allow this to be accomplished with a single network access policy?

  1. Dynamic host groups
  2. Logical networks
  3. Device profiling rules
  4. Preferred VLAN designations

Answer(s): B

Explanation:

Logical networks allow FortiNAC-F to map the same device type, such as printers, to different local VLANs based on where the device connects. This enables a single network access policy to dynamically assign printers to the correct building-specific printer VLAN without creating separate policies for each location.



Refer to the exhibit.



If a host is connected to a port in the Building 1 First Floor Ports group, what must also be true to match this user/host profile?

  1. The host must have a role value of contractor, an installed persistent agent of a security access value of contractor, and be connected between 6 AM and 5 PM.
  2. The host must have a role value of contractor or an installed persistent agent, a security access value of contractor, and be connected between 9 AM and 5 PM.
  3. The host must have a role value of contractor or an installed persistent agent or a security access value of contractor, and be connected between 6 AM and 5PM.
  4. The host must have a role value of contractor or an installed persistent agent and a security access value of contractor, and be connected between 6 AM and 5PM.

Answer(s): D

Explanation:

The profile requires the host to satisfy the attribute logic where either the role is contractor or a persistent agent is present, and the security access value must be contractor. In addition, the location condition restricts the match to Building 1 First Floor Ports, and the time condition limits access to the defined business hours of 6:00 AM to 5:00 PM.



Refer to the exhibit.



What will happen to the host of a guest user created from this template if the time of connection is 8:00 PM?

  1. The host will be marked as non-authenticated.
  2. The host will be marked as a rogue device.
  3. The host will be marked as at-risk.
  4. The host will be administratively disabled.

Answer(s): A

Explanation:

The guest template restricts login availability to the defined time window ending at 7:00 PM. If the host attempts to connect at 8:00 PM, authentication is not permitted, so the host remains in a non-authenticated state until it connects within the allowed time period.



Refer to the exhibits.





Based on the given configurations and settings, on which date and time would a guest account created at 8:00 AM on
/12 expire?


  1. /12 at 8:00 PM

  2. /12 at 7:00 PM

  3. /12 at 17:00:00

  4. /13 at 17:00:00

Answer(s): D

Explanation:

The account creation wizard shows the account start date/time as
/12 08:00:00 and the configured account end date/time as
/13 17:00:00. The guest account will therefore expire at the end date/time displayed in the wizard.



Share your comments for Fortinet NSE5_FNC_AD-7.6 exam with other users:

P
PMSAGAR
9/19/2023 2:48:00 AM

pls share teh dump

Z
zazza
6/16/2023 10:47:00 AM

question 44 answer is user risk

P
Prasana
6/23/2023 1:59:00 AM

please post the questions for preparation

T
test user
9/24/2023 3:15:00 AM

thanks for the questions

D
Draco
7/19/2023 5:34:00 AM

please reopen it now ..its really urgent

M
Megan
4/14/2023 5:08:00 PM

these practice exam questions were exactly what i needed. the variety of questions and the realistic exam-like environment they created helped me assess my strengths and weaknesses. i felt more confident and well-prepared on exam day, and i owe it to this exam dumps!

A
abdo casa
8/9/2023 6:10:00 PM

thank u it very instructuf

D
Danny
1/15/2024 9:10:00 AM

its helpful?

H
hanaa
10/3/2023 6:57:00 PM

is this dump still valid???

G
Georgio
1/19/2024 8:15:00 AM

question 205 answer is b

M
Matthew Dievendorf
5/30/2023 9:37:00 PM

question 39, should be answer b, directions stated is being sudneted from /21 to a /23. a /23 has 512 ips so 510 hosts. and can make 4 subnets out of the /21

A
Adhithya
8/11/2022 12:27:00 AM

beautiful test engine software and very helpful. questions are same as in the real exam. i passed my paper.

S
SuckerPumch88
4/25/2022 10:24:00 AM

the questions are exactly the same in real exam. just make sure not to answer all them correct or else they suspect you are cheating.

S
soheib
7/24/2023 7:05:00 PM

question: 78 the right answer i think is d not a

S
srija
8/14/2023 8:53:00 AM

very helpful

T
Thembelani
5/30/2023 2:17:00 AM

i am writing this exam tomorrow and have dumps

A
Anita
10/1/2023 4:11:00 PM

can i have the icdl excel exam

B
Ben
9/9/2023 7:35:00 AM

please upload it

A
anonymous
9/20/2023 11:27:00 PM

hye when will post again the past year question for this h13-311_v3 part since i have to for my test tommorow…thank you very much

R
Randall
9/28/2023 8:25:00 PM

on question 22, option b-once per session is also valid.

T
Tshegofatso
8/28/2023 11:51:00 AM

this website is very helpful

P
philly
9/18/2023 2:40:00 PM

its my first time exam

B
Beexam
9/4/2023 9:06:00 PM

correct answers are device configuration-enable the automatic installation of webview2 runtime. & policy management- prevent users from submitting feedback.

R
RAWI
7/9/2023 4:54:00 AM

is this dump still valid? today is 9-july-2023

A
Annie
6/7/2023 3:46:00 AM

i need this exam.. please upload these are really helpful

S
Shubhra Rathi
8/26/2023 1:08:00 PM

please upload the oracle 1z0-1059-22 dumps

S
Shiji
10/15/2023 1:34:00 PM

very good questions

R
Rita Rony
11/27/2023 1:36:00 PM

nice, first step to exams

A
Aloke Paul
9/11/2023 6:53:00 AM

is this valid for chfiv9 as well... as i am reker 3rd time...

C
Calbert Francis
1/15/2024 8:19:00 PM

great exam for people taking 220-1101

A
Ayushi Baria
11/7/2023 7:44:00 AM

this is very helpfull for me

A
alma
8/25/2023 1:20:00 PM

just started preparing for the exam

C
CW
7/10/2023 6:46:00 PM

these are the type of questions i need.

N
Nobody
8/30/2023 9:54:00 PM

does this actually work? are they the exam questions and answers word for word?

AI Tutor 👋 I’m here to help!