Fortinet NSE 5 - FortiNAC-F 7.6 Administrator NSE5_FNC_AD-7.6 Exam Questions in PDF

Free Fortinet NSE5_FNC_AD-7.6 Dumps Questions (page: 4)

An administrator has created several device profiling rules and evaluated all existing devices in the database. Some of the devices appear in the profiled devices view because they matched a rule, but they remain unknown and the registration column in the profiled devices view shows "No".

What is the most likely cause?

  1. The confirm device profiling rule option is not enabled.
  2. The devices match more than one device profiling rule.
  3. The device profiling rule has registration set to manual.
  4. The devices have persistent agents installed, and the point of connection has PA optimization enabled.

Answer(s): A

Explanation:

When the confirm device profiling rule option is not enabled, devices that match a profiling rule are identified and appear in the profiled devices view, but they are not automatically promoted from unknown to registered.
As a result, the devices remain in an unknown state and the registration column continues to show "No" despite
a successful rule match.



Where should you configure MAC notification traps on a supported switch?

  1. Only on ports that generate linkup and linkdown traps
  2. Only on ports defined as learned uplinks
  3. On all ports on the switch
  4. On all ports except uplink ports

Answer(s): C

Explanation:

MAC notification traps must be enabled on all ports of a supported switch so FortiNAC-F can receive MAC address learning and movement events regardless of where endpoints connect. This comprehensive coverage ensures accurate device discovery, tracking, and enforcement across the entire switch.



Refer to the exhibit.



What will occur if CA-2 fails?

  1. CA-1 and CA-3 will operate as a 1+1 HA cluster with CA-3 acting as a hot standby.
  2. CA-3 will continue to operate as a secondary in an N+1 HA configuration.
  3. CA-3 will be promoted to a primary and share management responsibilities with CA-1.
  4. CA-3 will be promoted to a primary and FortiNAC-F manager will load balance between CA-1 and CA-3.

Answer(s): D

Explanation:

In an N+1 HA architecture managed by a FortiNAC-F Manager, if a primary CA fails, an available secondary CA is automatically promoted to primary. After CA-2 fails, CA-3 is promoted to a primary role, and the FortiNAC-F Manager load balances management and enforcement responsibilities between the remaining primary CAs, CA-1 and CA-3.



During an evaluation of state-based enforcement, an administrator discovers that ports that should not be under enforcement have been added to enforcement groups.

In which view would the administrator be able to identify who added the ports to the groups?

  1. The Admin Auditing view
  2. The Event Management view
  3. The Port Changes view
  4. The Security Events view

Answer(s): A

Explanation:

The Admin Auditing view records administrative actions performed within FortiNAC-F, including configuration changes such as adding ports to enforcement groups. This view allows administrators to identify which user made the change and when it occurred.



Refer to the exhibit.



An administrator wants to use FortiNAC-F to automatically provision printers throughout their organization.
Each building uses its own local VLAN for printers.

Which FortiNAC-F feature would allow this to be accomplished with a single network access policy?

  1. Dynamic host groups
  2. Logical networks
  3. Device profiling rules
  4. Preferred VLAN designations

Answer(s): B

Explanation:

Logical networks allow FortiNAC-F to map the same device type, such as printers, to different local VLANs based on where the device connects. This enables a single network access policy to dynamically assign printers to the correct building-specific printer VLAN without creating separate policies for each location.



Refer to the exhibit.



If a host is connected to a port in the Building 1 First Floor Ports group, what must also be true to match this user/host profile?

  1. The host must have a role value of contractor, an installed persistent agent of a security access value of contractor, and be connected between 6 AM and 5 PM.
  2. The host must have a role value of contractor or an installed persistent agent, a security access value of contractor, and be connected between 9 AM and 5 PM.
  3. The host must have a role value of contractor or an installed persistent agent or a security access value of contractor, and be connected between 6 AM and 5PM.
  4. The host must have a role value of contractor or an installed persistent agent and a security access value of contractor, and be connected between 6 AM and 5PM.

Answer(s): D

Explanation:

The profile requires the host to satisfy the attribute logic where either the role is contractor or a persistent agent is present, and the security access value must be contractor. In addition, the location condition restricts the match to Building 1 First Floor Ports, and the time condition limits access to the defined business hours of 6:00 AM to 5:00 PM.



Refer to the exhibit.



What will happen to the host of a guest user created from this template if the time of connection is 8:00 PM?

  1. The host will be marked as non-authenticated.
  2. The host will be marked as a rogue device.
  3. The host will be marked as at-risk.
  4. The host will be administratively disabled.

Answer(s): A

Explanation:

The guest template restricts login availability to the defined time window ending at 7:00 PM. If the host attempts to connect at 8:00 PM, authentication is not permitted, so the host remains in a non-authenticated state until it connects within the allowed time period.



Refer to the exhibits.





Based on the given configurations and settings, on which date and time would a guest account created at 8:00 AM on
/12 expire?


  1. /12 at 8:00 PM

  2. /12 at 7:00 PM

  3. /12 at 17:00:00

  4. /13 at 17:00:00

Answer(s): D

Explanation:

The account creation wizard shows the account start date/time as
/12 08:00:00 and the configured account end date/time as
/13 17:00:00. The guest account will therefore expire at the end date/time displayed in the wizard.



Share your comments for Fortinet NSE5_FNC_AD-7.6 exam with other users:

C
Chere
9/15/2023 4:21:00 AM

found it good

T
Thembelani
5/30/2023 2:47:00 AM

excellent material

V
vinesh phale
9/11/2023 2:51:00 AM

very helpfull

B
Bhagiii
11/4/2023 7:04:00 AM

well explained.

R
Rahul
8/8/2023 9:40:00 PM

i need the pdf, please.

C
CW
7/11/2023 2:51:00 PM

a good source for exam preparation

A
Anchal
10/23/2023 4:01:00 PM

nice questions

J
J Nunes
9/29/2023 8:19:00 AM

i need ielts general training audio guide questions

A
Ananya
9/14/2023 5:16:00 AM

please make this content available

S
Swathi
6/4/2023 2:18:00 PM

content is good

L
Leo
7/29/2023 8:45:00 AM

latest dumps please

L
Laolu
2/15/2023 11:04:00 PM

aside from pdf the test engine software is helpful. the interface is user-friendly and intuitive, making it easy to navigate and find the questions.

Z
Zaynik
9/17/2023 5:36:00 AM

questions and options are correct, but the answers are wrong sometimes. so please check twice or refer some other platform for the right answer

M
Massam
6/11/2022 5:55:00 PM

90% of questions was there but i failed the exam, i marked the answers as per the guide but looks like they are not accurate , if not i would have passed the exam given that i saw about 45 of 50 questions from dump

A
Anonymous
12/27/2023 12:47:00 AM

answer to this question "what administrative safeguards should be implemented to protect the collected data while in use by manasa and her product management team? " it should be (c) for the following reasons: this administrative safeguard involves controlling access to collected data by ensuring that only individuals who need the data for their job responsibilities have access to it. this helps minimize the risk of unauthorized access and potential misuse of sensitive information. while other options such as (a) documenting data flows and (b) conducting a privacy impact assessment (pia) are important steps in data protection, implementing a "need to know" access policy directly addresses the issue of protecting data while in use by limiting access to those who require it for legitimate purposes. (d) is not directly related to safeguarding data during use; it focuses on data transfers and location.

J
Japles
5/23/2023 9:46:00 PM

password lockout being the correct answer for question 37 does not make sense. it should be geofencing.

F
Faritha
8/10/2023 6:00:00 PM

for question 4, the righr answer is :recover automatically from failures

A
Anonymous
9/14/2023 4:27:00 AM

question number 4s answer is 3, option c. i

P
p das
12/7/2023 11:41:00 PM

very good questions

A
Anna
1/5/2024 1:12:00 AM

i am confused about the answers to the questions. are the answers correct?

B
Bhavya
9/13/2023 10:15:00 AM

very usefull

R
Rahul Kumar
8/31/2023 12:30:00 PM

need certification.

D
Diran Ole
9/17/2023 5:15:00 PM

great exam prep

V
Venkata Subbarao Bandaru
6/24/2023 8:45:00 AM

i require dump

D
D
7/15/2023 1:38:00 AM

good morning, could you please upload this exam again,

A
Ann
9/15/2023 5:39:00 PM

hi can you please upload the dumps for sap contingent module. thanks

S
Sridhar
1/16/2024 9:19:00 PM

good questions

S
Summer
10/4/2023 9:57:00 PM

looking forward to the real exam

V
vv
12/2/2023 2:45:00 PM

good ones for exam preparation

D
Danny Zas
9/15/2023 4:45:00 AM

this is a good experience

S
SM 1211
10/12/2023 10:06:00 PM

hi everyone

A
A
10/2/2023 6:08:00 PM

waiting for the dump. please upload.

A
Anonymous
7/16/2023 11:05:00 AM

upload cks exam questions

J
Johan
12/13/2023 8:16:00 AM

awesome training material

AI Tutor 👋 I’m here to help!