A BIG-IP Administrator uses a device group to share the workload and needs to perform service on a BIG-IP device currently active for a traffic group. The administrator needs to enable the traffic group to run on another BIG-IP device in the device group.What should the administrator do to meet the requirement? (Choose one answer)
Answer(s): B
Comprehensive and Detailed Explanation From BIG-IP Administration Control Plane Administration documents:Traffic Groups are the mechanism BIG-IP uses to control which device owns specific application traffic in a high-availability (HA) configuration. When maintenance is required on a device that is currently active for a traffic group, the correct and recommended action is to fail over that traffic group to another device in the device group.Failing over the traffic group moves ownership of that traffic group (and the virtual servers associated with it) to another available device without forcing the entire device into standby.This allows targeted maintenance while minimizing impact to other traffic groups that may still be active on the device.Why the other options are incorrect:A is unnecessary and incorrect; traffic groups are not recreated for routine maintenance.C forces the entire device to standby, which may move more traffic than intended.D (Demote) affects device trust/priority behavior and is not the standard or recommended method for moving traffic group ownership.Therefore, selecting the Traffic Group and choosing Failover is the correct solution.
As an organization grows, more people have to log into the BIG-IP. Instead of adding more local users, the BIG-IP Administrator is asked to configure remote authentication against a central authentication server.Which two types of remote server can be used here? (Choose two answers)
Answer(s): A,C
Comprehensive and Detailed Explanation From BIG-IP Administration Control Plane Administration documents:BIG-IP supports remote authentication by integrating with centralized authentication services through its AAA framework. The supported and commonly used remote authentication servers include:LDAP (A)Used to authenticate users against directory services such as Active Directory or other LDAP- compliant directories.RADIUS (C)Commonly used for centralized authentication, authorization, and accounting, especially in network and security environments.Why the other options are incorrect:OAUTH (B) is an authorization framework, not supported as a direct administrative authentication backend for BIG-IP management access.SAML (D) is primarily used for single sign-on (SSO) in application authentication scenarios, not for BIG-IP administrative login authentication.Thus, the correct remote authentication server types are LDAP and RADIUS.
An organization is performing a major release upgrade to its BIG-IP system. The system is under medium load and has enough disk space to perform the upgrade.Which pre-upgrade task is disruptive to regular system performance and should be performed during a maintenance window? (Choose one answer)
Comprehensive and Detailed Explanation From BIG-IP Administration Control Plane Administration documents:Reactivating a BIG-IP license is a traffic-disruptive operation. During the license reactivation process, the BIG-IP system performs a configuration reload, which results in a temporary interruption of all traffic processing. Because traffic handling is affected, F5 explicitly recommends scheduling license updates during a maintenance window.This behavior is documented in F5 Knowledge Base articles, which state that license reactivation impacts traffic and must be planned accordingly during upgrades or system changes.The other options are not considered disruptive:Creating a QKView is primarily a diagnostic task and does not interrupt traffic.Running tmsh save sys config only saves the running configuration to disk.Generating a UCS is resource-intensive but does not reload configuration or interrupt traffic processing.
New Syslog servers have been deployed in an organization. The BIG-IP Administrator must reconfigure the BIG-IP system to send log messages to these servers.In which location in the Configuration Utility can the BIG-IP Administrator make the needed configuration changes to accomplish this? (Choose one answer)
Comprehensive and Detailed Explanation From BIG-IP Administration Control Plane Administration documents:On a BIG-IP system, remote syslog server configuration is managed through the logging configuration framework. In the Configuration Utility, this is accessed via:System > Logs > ConfigurationThis section allows the administrator to:Define remote syslog destinationsConfigure log publishersControl which log types (system, audit, LTM, ASM, etc.) are forwarded to external syslog serversWhy the other options are incorrect:A . System > Configuration > Local TrafficUsed for traffic management settings, not logging.C . System > Logs > AuditDisplays audit log settings and content but does not configure remote syslog destinations.D . System > Configuration > DeviceUsed for device-level settings such as hostname and platform configuration, not logging.Therefore, the correct location to reconfigure BIG-IP to send logs to new syslog servers is System > Logs > Configuration.===========
The BIG-IP Administrator suspects unauthorized SSH login attempts on the BIG-IP system.Which log file would contain details of these attempts? (Choose one answer)
Comprehensive and Detailed Explanation From BIG-IP Administration Control Plane Administration documents:On BIG-IP systems, authentication and authorization events are logged in /var/log/secure. This includes:Successful and failed SSH login attemptsInvalid user authentication attemptsPAM (Pluggable Authentication Module) authentication failuresAccess denials related to secure servicesWhy the other options are incorrect:/var/log/messages contains general system messages and service events, not detailed authentication failures./var/log/audit records administrative configuration changes (who changed what and when), not login attempts./var/log/ltm logs traffic-management (TMM) and application-related events.Therefore, the correct log file for investigating unauthorized SSH login attempts is /var/log/secure.===========
Which command will provide the BIG-IP Administrator with the current device HA status? (Choose one answer)
Answer(s): C
Comprehensive and Detailed Explanation From BIG-IP Administration Control Plane Administration documents:To determine the current failover (HA) status of a BIG-IP system using tmsh, F5 documentation explicitly states that the administrator should use the following command:show /cm failover-statusThis command displays:The current failover state (active, standby, or offline)Detailed failover status informationThe operational HA condition of the device within a device groupAccording to F5 Knowledge Base Article K08452454, the documented procedure for checking failover status is:Log in to the TMOS Shell (tmsh)Run show /cm failover-statusWhy the other options are incorrect:A . list /cm failover shows configuration settings, not operational HA status.B . show /sys failover is not the documented command for checking current failover status and does not align with F5's recommended procedure.
In which of the following log files would log events pertaining to pool members being marked "UP" or "DOWN" by their Health Monitors be written? (Choose one answer)
Comprehensive and Detailed Explanation From BIG-IP Administration Control Plane Administration documents:On BIG-IP systems, Local Traffic Manager (LTM) is responsible for:Pool and pool member managementHealth monitor executionMarking pool members UP or DOWN based on monitor resultsEvents related to health monitor status changes, including when pool members transition between UP and DOWN, are logged in /var/log/ltm.Why the other options are incorrect:/var/log/audit records administrative configuration changes, not runtime health status./var/log/secure logs authentication and authorization events./var/log/monitors is not a standard BIG-IP log file.Therefore, the correct log file for pool member health monitor status events is /var/log/ltm.===========
Administrative user accounts have been defined on the remote LDAP server and are unable to log in to the BIG-IP device.Which log file should the BIG-IP Administrator check to find the related messages? (Choose one answer)
Answer(s): D
Comprehensive and Detailed Explanation From BIG-IP Administration Control Plane Administration documents:When BIG-IP is configured to use remote authentication (such as LDAP), all authentication and authorization attempts--including successes and failures--are logged to /var/log/secure.For LDAP-based administrative login issues, /var/log/secure contains:LDAP authentication failuresPAM authentication errorsAuthorization and access-denied messagesDetails explaining why a remote user could not log inWhy the other options are incorrect:/var/log/user.log is not a standard BIG-IP log file for authentication./var/log/ltm logs traffic management events, not user authentication./var/log/messages contains general system messages but not detailed authentication failure information.Therefore, the correct log file to troubleshoot LDAP administrative login failures is /var/log/secure.===========
Share your comments for F5 F5CAB4 exam with other users:
question: a user wants to start a recruiting posting job posting. what must occur before the posting process can begin? 3 ans: comment- option e is incorrect reason: as part of enablement steps, sap recommends that to be able to post jobs to a job board, a user need to have the correct permission and secondly, be associated with one posting profile at minimum
answer to question 72 is d [sys_user_role]
please provide the pdf
hey guys, just to let you all know that i cleared my 312-38 today within 1 hr with 100 questions and passed. thank you so much brain-dumps.net all the questions that ive studied in this dump came out exactly the same word for word "verbatim". you rock brain-dumps.net!!! section name total score gained score network perimeter protection 16 11 incident response 10 8 enterprise virtual, cloud, and wireless network protection 12 8 application and data protection 13 10 network défense management 10 9 endpoint protection 15 12 incident d
very helpful
useful questions
page :20 https://exam-dumps.com/snowflake/free-cof-c02-braindumps.html?p=20#collapse_453 q 74: true or false: pipes can be suspended and resumed. true. desc.: pausing or resuming pipes in addition to the pipe owner, a role that has the following minimum permissions can pause or resume the pipe https://docs.snowflake.com/en/user-guide/data-load-snowpipe-intro
i want hcia exam dumps
good training
very useful
yes need this exam dumps
these questions are a great eye opener
thank you for providing these questions and answers. they helped me pass my exam. you guys are great.
good knowledge
answer 10 should be a because only a new project will be created & the organization is the same.
can you please upload the dump again
is it legit questions from sap certifications ?
question 16 should be b (changing the connector settings on the monitor) pc and monitor were powered on. the lights on the pc are on indicating power. the monitor is showing an error text indicating that it is receiving power too. this is a clear sign of having the wrong input selected on the monitor. thus, the "connector setting" needs to be switched from hdmi to display port on the monitor so it receives the signal from the pc, or the other way around (display port to hdmi).
q 10. ans is d (in the target org: open deployment settings, click edit next to the source org. select allow inbound changes and save
i purchased this exam dumps from another website with way more questions but they were all invalid and outdate. this exam dumps was right to the point and all from recent exam. it was a hard pass.
it was a good experience and i got 90% in the 200-901 exam.
hi please upload this
please upload it
really need this dump. can you please help.
really good and covers many areas explaining the answer.
yes, can you please upload the exam?
how many questions are there in these dumps?
hi team, please upload this , i need it.
question 14 - run terraform import: this is the recommended best practice for bringing manually created or destroyed resources under terraform management. you use terraform import to associate an existing resource with a terraform resource configuration. this ensures that terraform is aware of the resource, and you can subsequently manage it with terraform.
please upload dump. thanks in advance.
great great
answer 16 should be b your organizational policies require you to use virtual machines directly
the question are kind of tricky of you didnt get the hnag on it.
Keeping this site free takes real effort. We constantly battle automated scraping and unauthorized content copying. A quick account helps us protect the community and keep the site free.
To continue studying for your F5CAB4, please sign in or create a free account.