A BIG-IP Administrator uses a device group to share the workload and needs to perform service on a BIG-IP device currently active for a traffic group. The administrator needs to enable the traffic group to run on another BIG-IP device in the device group.What should the administrator do to meet the requirement? (Choose one answer)
Answer(s): B
Comprehensive and Detailed Explanation From BIG-IP Administration Control Plane Administration documents:Traffic Groups are the mechanism BIG-IP uses to control which device owns specific application traffic in a high-availability (HA) configuration. When maintenance is required on a device that is currently active for a traffic group, the correct and recommended action is to fail over that traffic group to another device in the device group.Failing over the traffic group moves ownership of that traffic group (and the virtual servers associated with it) to another available device without forcing the entire device into standby.This allows targeted maintenance while minimizing impact to other traffic groups that may still be active on the device.Why the other options are incorrect:A is unnecessary and incorrect; traffic groups are not recreated for routine maintenance.C forces the entire device to standby, which may move more traffic than intended.D (Demote) affects device trust/priority behavior and is not the standard or recommended method for moving traffic group ownership.Therefore, selecting the Traffic Group and choosing Failover is the correct solution.
As an organization grows, more people have to log into the BIG-IP. Instead of adding more local users, the BIG-IP Administrator is asked to configure remote authentication against a central authentication server.Which two types of remote server can be used here? (Choose two answers)
Answer(s): A,C
Comprehensive and Detailed Explanation From BIG-IP Administration Control Plane Administration documents:BIG-IP supports remote authentication by integrating with centralized authentication services through its AAA framework. The supported and commonly used remote authentication servers include:LDAP (A)Used to authenticate users against directory services such as Active Directory or other LDAP- compliant directories.RADIUS (C)Commonly used for centralized authentication, authorization, and accounting, especially in network and security environments.Why the other options are incorrect:OAUTH (B) is an authorization framework, not supported as a direct administrative authentication backend for BIG-IP management access.SAML (D) is primarily used for single sign-on (SSO) in application authentication scenarios, not for BIG-IP administrative login authentication.Thus, the correct remote authentication server types are LDAP and RADIUS.
An organization is performing a major release upgrade to its BIG-IP system. The system is under medium load and has enough disk space to perform the upgrade.Which pre-upgrade task is disruptive to regular system performance and should be performed during a maintenance window? (Choose one answer)
Comprehensive and Detailed Explanation From BIG-IP Administration Control Plane Administration documents:Reactivating a BIG-IP license is a traffic-disruptive operation. During the license reactivation process, the BIG-IP system performs a configuration reload, which results in a temporary interruption of all traffic processing. Because traffic handling is affected, F5 explicitly recommends scheduling license updates during a maintenance window.This behavior is documented in F5 Knowledge Base articles, which state that license reactivation impacts traffic and must be planned accordingly during upgrades or system changes.The other options are not considered disruptive:Creating a QKView is primarily a diagnostic task and does not interrupt traffic.Running tmsh save sys config only saves the running configuration to disk.Generating a UCS is resource-intensive but does not reload configuration or interrupt traffic processing.
New Syslog servers have been deployed in an organization. The BIG-IP Administrator must reconfigure the BIG-IP system to send log messages to these servers.In which location in the Configuration Utility can the BIG-IP Administrator make the needed configuration changes to accomplish this? (Choose one answer)
Comprehensive and Detailed Explanation From BIG-IP Administration Control Plane Administration documents:On a BIG-IP system, remote syslog server configuration is managed through the logging configuration framework. In the Configuration Utility, this is accessed via:System > Logs > ConfigurationThis section allows the administrator to:Define remote syslog destinationsConfigure log publishersControl which log types (system, audit, LTM, ASM, etc.) are forwarded to external syslog serversWhy the other options are incorrect:A . System > Configuration > Local TrafficUsed for traffic management settings, not logging.C . System > Logs > AuditDisplays audit log settings and content but does not configure remote syslog destinations.D . System > Configuration > DeviceUsed for device-level settings such as hostname and platform configuration, not logging.Therefore, the correct location to reconfigure BIG-IP to send logs to new syslog servers is System > Logs > Configuration.===========
The BIG-IP Administrator suspects unauthorized SSH login attempts on the BIG-IP system.Which log file would contain details of these attempts? (Choose one answer)
Comprehensive and Detailed Explanation From BIG-IP Administration Control Plane Administration documents:On BIG-IP systems, authentication and authorization events are logged in /var/log/secure. This includes:Successful and failed SSH login attemptsInvalid user authentication attemptsPAM (Pluggable Authentication Module) authentication failuresAccess denials related to secure servicesWhy the other options are incorrect:/var/log/messages contains general system messages and service events, not detailed authentication failures./var/log/audit records administrative configuration changes (who changed what and when), not login attempts./var/log/ltm logs traffic-management (TMM) and application-related events.Therefore, the correct log file for investigating unauthorized SSH login attempts is /var/log/secure.===========
Which command will provide the BIG-IP Administrator with the current device HA status? (Choose one answer)
Answer(s): C
Comprehensive and Detailed Explanation From BIG-IP Administration Control Plane Administration documents:To determine the current failover (HA) status of a BIG-IP system using tmsh, F5 documentation explicitly states that the administrator should use the following command:show /cm failover-statusThis command displays:The current failover state (active, standby, or offline)Detailed failover status informationThe operational HA condition of the device within a device groupAccording to F5 Knowledge Base Article K08452454, the documented procedure for checking failover status is:Log in to the TMOS Shell (tmsh)Run show /cm failover-statusWhy the other options are incorrect:A . list /cm failover shows configuration settings, not operational HA status.B . show /sys failover is not the documented command for checking current failover status and does not align with F5's recommended procedure.
In which of the following log files would log events pertaining to pool members being marked "UP" or "DOWN" by their Health Monitors be written? (Choose one answer)
Comprehensive and Detailed Explanation From BIG-IP Administration Control Plane Administration documents:On BIG-IP systems, Local Traffic Manager (LTM) is responsible for:Pool and pool member managementHealth monitor executionMarking pool members UP or DOWN based on monitor resultsEvents related to health monitor status changes, including when pool members transition between UP and DOWN, are logged in /var/log/ltm.Why the other options are incorrect:/var/log/audit records administrative configuration changes, not runtime health status./var/log/secure logs authentication and authorization events./var/log/monitors is not a standard BIG-IP log file.Therefore, the correct log file for pool member health monitor status events is /var/log/ltm.===========
Administrative user accounts have been defined on the remote LDAP server and are unable to log in to the BIG-IP device.Which log file should the BIG-IP Administrator check to find the related messages? (Choose one answer)
Answer(s): D
Comprehensive and Detailed Explanation From BIG-IP Administration Control Plane Administration documents:When BIG-IP is configured to use remote authentication (such as LDAP), all authentication and authorization attempts--including successes and failures--are logged to /var/log/secure.For LDAP-based administrative login issues, /var/log/secure contains:LDAP authentication failuresPAM authentication errorsAuthorization and access-denied messagesDetails explaining why a remote user could not log inWhy the other options are incorrect:/var/log/user.log is not a standard BIG-IP log file for authentication./var/log/ltm logs traffic management events, not user authentication./var/log/messages contains general system messages but not detailed authentication failure information.Therefore, the correct log file to troubleshoot LDAP administrative login failures is /var/log/secure.===========
Share your comments for F5 F5CAB4 exam with other users:
please allow to download
please provide dumps
is the answer to question 15 correct ? i feel like the answer should be b
its getting more technical
i think these questions are what i need.
helpful assessment
i am confused about the answers to the questions. do you know if the answers are correct?
hi, please make the dumps available for my upcoming examination.
good practice
so far it is really informative
hi i want it please please upload it
am preparing for exam ,just nice questions
please upload c_tadm_23 exam
can we get tdvan4 vantage data engineering pdf?
want to clear the exam.
could you please upload the dumps of sap c_sac_2302
asm management configuration is about storage
kool thumb up
just passed the az-500 exam this last friday. most of the questions in this exam dumps are in the exam. i bought the full version and noticed some of the questions which were answered wrong in the free version are all corrected in the full version. this site is good but i wish the had it in an interactive version like a test engine simulator.
i can practice for exam
please i need this exam.
i need the dump
i want it bad, even if cs6 maybe retired, i want to learn cs6
i hate comptia with all my heart with their "choose the best" answer format as an argument could be made on every question. they say "the "comptia way", lmao no this right here boys is the comptia way 100%. take it from someone whos failed this exam twice but can configure an entire complex network that these are the questions that are on the test 100% no questions asked. the pbqs are dead on! nice work
very good materials
thanks for your support.
iam impressed with the quality of these dumps. they questions and answers were easy to understand and the xengine app was very helpful to use.
not bad but you question database from isaca
awesome contents
answer to 134 is casb. while data loss prevention is the goal, in order to implement dlp in cloud applications you need to deploy a casb.
are these brain dumps sufficient enough to go write exam after practicing them? or does one need more material this wont be enough?
i did attend the required cources and i need to be sure that i am ready to take the exam, i would ask you please to share the questions, to be sure that i am fit to proceed with taking the exam.
why only give explanations on some, and not all questions and their respective answers?
refresh db knowledge
Keeping this site free takes real effort. We constantly battle automated scraping and unauthorized content copying. A quick account helps us protect the community and keep the site free.
To continue studying for your F5CAB4, please sign in or create a free account.