Cisco 200-301 Exam (page: 47)
Cisco Certified Network Associate (CCNA)
Updated on: 12-Feb-2026

Viewing Page 47 of 281

How do AAA operations compare regarding user identification, user services, and access control?

  1. Authorization provides access control, and authentication tracks user services
  2. Authentication identifies users, and accounting tracks user services
  3. Accounting tracks user services, and authentication provides access control
  4. Authorization identifies users, and authentication provides access control

Answer(s): B



What is the difference between RADIUS and TACACS+?

  1. RADIUS logs all commands that are entered by the administrator, but TACACS+ logs only start, stop, and interim commands.
  2. TACACS+ separates authentication and authorization, and RADIUS merges them.
  3. TACACS+ encrypts only password information, and RADIUS encrypts the entire payload.
  4. RADIUS is most appropriate for dial authentication, but TACACS+ can be used for multiple types of authentication.

Answer(s): B



What is a difference between local AP mode and FlexConnect AP mode?

  1. Local AP mode creates two CAPWAP tunnels per AP to the WLC
  2. Local AP mode causes the AP to behave as if it were an autonomous AP
  3. FlexConnect AP mode fails to function if the AP loses connectivity with the WLC
  4. FlexConnect AP mode bridges the traffic from the AP to the WLC when local switching is configured

Answer(s): A



The SW1 interface g0/1 is in the down/down state. What are two reasons for the interface condition? (Choose two.)

  1. There is a protocol mismatch
  2. There is a duplex mismatch
  3. The interface is shut down
  4. The interface is error-disabled
  5. There is a speed mismatch

Answer(s): D,E

Explanation:

The interface is shut down - ADMIN DOWN / DOWN
The interface is error-disabled - DOWN / DOWN
There is a speed mismatch - DOWN / DOWN



How will Link Aggregation be implemented on a Cisco Wireless LAN Controller?

  1. The EtherChannel must be configured in “mode active”.
  2. When enabled, the WLC bandwidth drops to 500 Mbps.
  3. To pass client traffic, two or more ports must be configured.
  4. One functional physical port is needed to pass client traffic.

Answer(s): D


Reference:

https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-2/config-guide/b_cg82/b_cg82_chapter_010101011.html



Viewing Page 47 of 281



Share your comments for Cisco 200-301 exam with other users:

yenvti2@gmail.com 8/12/2023 7:56:00 PM

very helpful for exam preparation
Anonymous


Xunil 6/12/2023 3:04:00 PM

great job whoever put this together, for the greater good! thanks!
Anonymous


x-men 5/23/2023 1:02:00 AM

q23, its an array, isnt it? starts with [ and end with ]. its an array of objects, not object.
UNITED STATES


Dan 8/10/2023 4:19:00 PM

question 129 is completely wrong.
UNITED STATES


Da_costa 8/1/2023 5:28:00 PM

these are free brain dumps i understand, how can one get free pdf
Anonymous


Da Costa 8/27/2023 11:43:00 AM

question 128 the answer should be static not auto
Anonymous


CiscoStudent 11/15/2023 5:29:00 AM

in question 272 the right answer states that an autonomous acces point is "configured and managed by the wlc" but this is not what i have learned in my ccna course. is this a mistake? i understand that lightweight aps are managed by wlc while autonomous work as standalones on the wlan.
Anonymous


Berihun Desalegn Wonde 7/13/2023 11:00:00 AM

all questions are more important
Anonymous


RAWI 7/9/2023 4:54:00 AM

is this dump still valid? today is 9-july-2023
SWEDEN


Berihun 7/13/2023 7:29:00 AM

all questions are so important and covers all ccna modules
Anonymous


Nico 4/23/2023 11:41:00 PM

my 3rd purcahse from this site. these exam dumps are helpful. very helpful.
ITALY


Da Costa 8/25/2023 7:30:00 AM

question 423 eigrp uses metric
Anonymous


Gurdeep 1/18/2024 4:00:15 PM

This is one of the most useful study guides I have ever used.
CANADA