Cisco Certified Network Associate (CCNA) 200-301 Exam Questions in PDF

Free Cisco 200-301 Dumps Questions (page: 37)

Refer to the exhibit. Which switch in this configuration will be elected as the root bridge?


SW1: 0C:E0:38:41:86:07
SW2: 0C:0E:15:22:05:97
SW3: 0C:0E:15:1A:3C:9D
SW4: 0C:E0:18:A1:B3:19

  1. SW1
  2. SW2
  3. SW3
  4. SW4

Answer(s): C



DRAG DROP (Drag and Drop is not supported)
Refer to the exhibit.

An engineer is required to verify that the network parameters are valid for the users' wireless LAN connectivity on a /24 subnet. Drag and drop the values from the left onto the network parameters on the right. Not all values are used.
Select and Place:

  1. See Explanation section for answer.

Answer(s): A

Explanation:



An engineer needs to configure LLDP to send the port description type length value (TLV). Which command sequence must be implemented?

  1. switch(config-if)#lldp port-description
  2. switch#lldp port-description
  3. switch(config-line)#lldp port-description
  4. switch(config)#lldp port-description

Answer(s): D



Refer to the exhibit. Which switch becomes the root bridge?

  1. S1
  2. S2
  3. S3
  4. S4

Answer(s): B



Which configuration ensures that the switch is always the root for VLAN 750?

  1. Switch(config)#spanning-tree vlan 750 priority 38418607
  2. Switch(config)#spanning-tree vlan 750 priority 0
  3. Switch(config)#spanning-tree vlan 750 root primary
  4. Switch(config)#spanning-tree vlan 750 priority 614440

Answer(s): B



Share your comments for Cisco 200-301 exam with other users:

A
Anonymous User
4/14/2026 12:31:34 PM

Question 2:
For question 2, the key concept is the Longest Prefix Match. Routers pick the route whose subnet mask is the most specific (largest prefix length) that still matches the destination IP.
From the options:

  • A) 10.10.10.0/28 ? 10.10.10.0–10.10.10.15
  • B) 10.10.13.0/25 ? 10.10.13.0–10.10.13.127
  • C) 10.10.13.144/28 ? 10.10.13.144–10.10.13.159
  • D) 10.10.13.208/29 ? 10.10.13.208–10.10.13.215

The destination Host A’s IP must fall within 10.10.13.208–10.10.13.215 for the /29 to be the best match. Since /29 is the longest prefix among the matching options, Router1 will use 10.10.13.208/29.
Thus, the correct answer is D.

Y
yenvti2@gmail.com
8/12/2023 7:56:00 PM

very helpful for exam preparation

X
Xunil
6/12/2023 3:04:00 PM

great job whoever put this together, for the greater good! thanks!

X
x-men
5/23/2023 1:02:00 AM

q23, its an array, isnt it? starts with [ and end with ]. its an array of objects, not object.

D
Dan
8/10/2023 4:19:00 PM

question 129 is completely wrong.

D
Da_costa
8/1/2023 5:28:00 PM

these are free brain dumps i understand, how can one get free pdf

D
Da Costa
8/27/2023 11:43:00 AM

question 128 the answer should be static not auto

C
CiscoStudent
11/15/2023 5:29:00 AM

in question 272 the right answer states that an autonomous acces point is "configured and managed by the wlc" but this is not what i have learned in my ccna course. is this a mistake? i understand that lightweight aps are managed by wlc while autonomous work as standalones on the wlan.

B
Berihun Desalegn Wonde
7/13/2023 11:00:00 AM

all questions are more important

R
RAWI
7/9/2023 4:54:00 AM

is this dump still valid? today is 9-july-2023

B
Berihun
7/13/2023 7:29:00 AM

all questions are so important and covers all ccna modules

N
Nico
4/23/2023 11:41:00 PM

my 3rd purcahse from this site. these exam dumps are helpful. very helpful.

D
Da Costa
8/25/2023 7:30:00 AM

question 423 eigrp uses metric

G
Gurdeep
1/18/2024 4:00:15 PM

This is one of the most useful study guides I have ever used.

AI Tutor 👋 I’m here to help!