200-301 Exam Questions and Answers | Exam-Dumps (Page: 26)

QUESTION: 126

What are the two functions of SSIDs? (Choose two.)

uses the maximum of 32 alphanumeric characters
controls the speed of the Wi-Fi network
used exclusively with controller-based Wi-Fi networks
supports a single access point
broadcasts by default

Answer(s): A,E

Reveal Solution Next Question

QUESTION: 127

Which two characteristics describe the access layer in a three-tier network architecture? (Choose two.)

serves as the network aggregation point
physical connection point for a LAN printer
designed to meet continuous redundant uptime requirements
layer at which a wireless access point connects to the wired network
provides a boundary between Layer 2 and Layer 3 communications

Answer(s): B,D

Explanation:

The Access Layer is the one closer to the users. In fact, at this layer, we find the users themselves and the access-layer switches. The main purpose of this layer is to physically connect users to the network. In other words, there is just a cable between end-user PCs, printers, and wireless access points and access-layer switches.

Reveal Solution Next Question

QUESTION: 128

Which PoE mode enables powered-devices detection and guarantees power when the device detected?

auto
static
dynamic
active

Answer(s): A

Reveal Solution Next Question

QUESTION: 129

Refer to the exhibit. The router has been configured with a super net to accommodate the requirements for 380 users on a Subnet. The requirement already considers 30% future growth. Which configuration verifies the IP subnet on router R4?

Subnet: 10.7.54.0 Subnet mask: 255.255.128.0 Broadcast address: 10.5.55.255 Usable IP address range: 10.7.54.1 “" 10.7.55.254
Subnet: 10.7.54.0 Subnet mask: 255.255.255.0 Broadcast address: 10.7.54.255 Usable IP address range: 10.7.54.1 “" 10.7.55.254
Subnet: 10.7.54.0 Subnet mask: 255.255.254.0 Broadcast address: 10.7.54.255 Usable IP address range: 10.7.54.1 “" 10.7.55.254
Subnet: 10.7.54.0 Subnet mask: 255.255.254.0 Broadcast address: 10.7.55.255 Usable IP address range: 10.7.54.1 “" 10.7.55.254

Answer(s): D

Reveal Solution Next Question

QUESTION: 130

Refer to the exhibit. Configurations for the switch and PCs are complete. Which configuration must be applied so that VLANs 2 and 3 communicate back and forth?

interface GigabitEthernet0/0 ip address 10.10.2.10 255.255.252.0
interface GigabitEthernet0/0.10 encapsulation dot1Q 3 ip address 10.10.2.10 255.255.254.0
interface GigabitEthernet0/0.3 encapsulation dot1Q 3 native ip address 10.10.2.10 255.255.252.0
interface GigabitEthernet0/0.3 encapsulation dot1Q 10 ip address 10.10.2.10 255.255.255.252

Answer(s): B

Reveal Solution Next Question

Cisco 200-301 Exam (page: 26) Cisco Certified Network Associate (CCNA) Updated on: 09-Feb-2026

QUESTION: 126

QUESTION: 127

Explanation:

QUESTION: 128

QUESTION: 129

QUESTION: 130

Cisco 200-301 Exam (page: 26)
Cisco Certified Network Associate (CCNA)
Updated on: 09-Feb-2026