Test Prep National Registry Emergency Medical Technician NREMT Dumps in PDF

Free Test Prep NREMT Real Questions (page: 6)

Your patient is a 35-year-old trauma victim who is not breathing. You are unable to open the airway by means of the jaw thrust and suctioning. You should:

  1. Attempt a mouth-to-mask ventilation.
  2. Use the head-tilt / chin-lift technique.
  3. Ventilate with a bag-valve-mask unit.
  4. Insert an airway through a tracheostomy.

Answer(s): B

Explanation:

Although the head-tilt / chin-lift is not ordinarily used on trauma patients because it interferes with spinal immobilization and alignment, opening the airway takes priority over all other considerations. Be sure to document your actions in the patient care report.



Which statement about inadequate breathing is correct?

  1. A breathing rate that is either too fast or too slow may indicate inadequate breathing.
  2. Inadequate breathing is much less common in small children than in older adults.
  3. Increased effort of breathing is often a normal sign and is not associated with inadequate breathing.
  4. A patient breathing very deeply or very shallowly is compensating for an abnormal respiratory rate.

Answer(s): A

Explanation:

A respiratory rate that is either too fast or too slow may be a sign of inadequate breathing. Respiratory distress occurs with many medical and trauma problems and spans the age groups. An increased work (effort) of breathing frequently accompanies inadequate breathing as the patient attempts to compensate, but it should never be considered a “normal sign”. Patients may breathe shallowly or deeply for a number of reasons, only one of which is to compensate for an abnormal rate.



What differences in a child’s airway might make airway management more difficult than in an adult?

  1. longer airway and small tongue
  2. smaller jaw, smaller teeth
  3. There are no anatomic differences that affect airway management in children versus adults.
  4. a smaller jaw and a proportionally larger tongue

Answer(s): D

Explanation:

Children have a smaller jaw and a proportionally larger tongue, which can make manual ventilation and intubation more difficult. Smaller teeth do not affect airway management.



A normal respiratory rate for an adult is _______________ while a normal respiratory rate for a newborn is _______________.

  1. 8 to16 and 20 to 40
  2. 12 to 20 and 30 to 60
  3. 12 to 20 and 16 to 24
  4. 22 to 30 and 50

Answer(s): B

Explanation:

This is the best of the given answer choices. Under 12 is too low of an RR for adults and above 20 is considered high. Newborns breathe faster than adults. Under 30 would be too low for a newborn.
Note: Some newer study materials are suggesting a range of 12 to 24 for adults. This may be to allow for the fact that many people you deal with are under stress and might have a slightly elevated “normal” rate. COPD patients can even be over 24. Check with your instructor and the study material your class uses to verify these figures as you prepare for the test.



What is the first thing you should do before inserting a nasopharyngeal airway?

  1. Look up the nose to make sure the nostrils are large enough for a nasopharyngeal airway.
  2. Tilt the head back, lube the airway, and insert it into the nostril.
  3. Make sure the patient does not have a gag reflex.
  4. Select the correct size.

Answer(s): D

Explanation:

Before the airway can be inserted, the correct size needs to be selected. If the wrong size is inserted the airway may not be effective. A nasopharyngeal airway can be used on a patient with or without a gag reflex.



Emergency care for patients who are not breathing adequately but have a pulse includes all of the following except _______________.

  1. supplemental oxygen
  2. ventilatory support
  3. airway management
  4. CPR

Answer(s): D

Explanation:

If the patient is not breathing adequately but still has a pulse, CPR is not needed. CPR will be required if a person loses their pulse.



You arrive on scene to find a young woman who is having trouble talking. She has hives and is starting to gasp for air. Her friend says she was just stung by a bee. Your immediate actions should include all of the following except _______________.

  1. administer epinephrine (If your state and local EMS protocols allow.)
  2. provide airway support
  3. administer supplemental oxygen
  4. assess the bee sting for signs of an infection

Answer(s): D

Explanation:

Epinephrine is used to treat anaphylactic shock, and should be administered. The patient’s airway may be compromised due to swelling, so airway support is essential. Supplemental oxygen should also be administered. There is no need to assess the bee sting for infection at this point as that is not immediately life-threatening.



You’re called to a home and find an unresponsive male. Family members said he “passed out.” You assess the scene to be safe. The next thing you should do is:

  1. get a blood pressure to determine if it’s too low and may have caused him to pass out.
  2. simultaneously check for a pulse and breathing.
  3. get a temperature to determine if he has heat stroke.
  4. check the patient’s blood sugar; he might be a diabetic.

Answer(s): B

Explanation:

In an unresponsive person, you may have to initiate CPR. It’s essential to check to determine if a patient has a pulse and is breathing. Other vital signs and measurements, such as a BP, blood sugar and temperature can be obtained at a later point.



Share your comments for Test Prep NREMT exam with other users:

A
AI Tutor Explanation
4/23/2026 3:07:03 PM

Question 62:

  • Correct answer: D (per the page)

  • Note: The explanation text on the page describes option B (use ZDX score and Analyze Score to trigger the Y Engine analysis), indicating a mismatch between the stated answer and the rationale.

  • Key concept: For fast root-cause analysis, leverage telemetry and auto-correlated insights:
- Use the user’s ZDX score for AWS and run Analyze Score to activate the Y Engine, which correlates metrics across network, client, and application to pinpoint the issue quickly.
  • Why the other options are less effective:
- A: Only checks for outages; doesn’t provide actionable root-cause analysis. - C: Deep Trace helps visibility but is manual and time-consuming. - D: Packet capture is invasive and slow; not the quickest path to root cause.

A
AI Tutor Explanation
4/23/2026 12:26:21 PM

Question 32:

  • Answer: A (2.4GHz)

  • Why: Lower-frequency signals have longer wavelengths and experience less attenuation when passing through walls and obstacles. Higher frequencies (5GHz, 6GHz) are more easily blocked by walls. NFC operates over very short distances and is not meant to penetrate walls. So 2.4 GHz best penetrates physical objects like walls.

A
AI Tutor Explanation
4/21/2026 8:48:36 AM

Question 3:

  • False is the correct answer (Option B).

Why:
  • In Snowflake, a database is a metadata object that exists within a single Snowflake account. Accounts are isolated—there isn’t one database that lives in multiple accounts.
  • You can access data across accounts via data sharing or database replication, but these create separate database objects in the other accounts (e.g., a database in the consumer account created from a share), not a single shared database across accounts.

So a single database cannot exist in more than one Snowflake account.

A
Anonymous User
4/16/2026 10:54:18 AM

Question 1:

  • Correct answer: Edate = sys.argv[1]
  • Why this is correct:
- When a Databricks Job passes parameters to a notebook, those parameters are supplied to the notebook's Python process as command-line arguments. The first argument after the script name is sys.argv[1], so date = sys.argv[1] captures the passed date value directly.
  • How it compares to other options:
- date = spark.conf.get("date") reads from Spark config, not from job parameters. - input() waits for user input at runtime, which isn’t how job parameters are provided. - date = dbutils.notebooks.getParam("date") would work if the notebook were invoked via dbutils.notebook.run with parameters, not

A
Anonymous User
4/15/2026 4:42:07 AM

Question 528:

  • Correct answer: NSG flow logs for NSG1 (Option B)

  • Why:
- Traffic Analytics uses NSG flow logs to analyze traffic patterns. You must have NSG flow logs enabled for the NSGs you want to monitor. - An Azure Log Analytics workspace is also required to store and query the traffic data. - Network Watcher must be available in the subscription for traffic analytics to function.
  • What to configure (brief steps):
- Ensure Network Watcher is enabled in the East US region (for the subscription/region). - Enable NSG flow logs on NSG1. - Ensure a Log Analytics workspace exists and is accessible (read/write) so Traffic Analytics can store and query logs.
  • Why other options aren’t correct:
- “Diagnostic settings for VM1” or “Diagnostic settings for NSG1” alone don’t guarantee flow logs are captured and sent to Log Analytics, which Traffic Analytics relies on. - “Insights for VM1” is not how Traffic Analytics collects traffic data.

A
Anonymous User
4/15/2026 2:43:53 AM

Question 23:
The correct answer is Domain admin (option B), not Fabric admin.

  • Domain admin provides domain-level management: create domains/subdomains and assign workspaces within those domains, which matches the tasks while following least privilege.
  • Fabric admin is global-level access and is more privileges than needed for this scenario (it would grant broader control across the Fabric environment).

A
Anonymous User
4/14/2026 12:31:34 PM

Question 2:
For question 2, the key concept is the Longest Prefix Match. Routers pick the route whose subnet mask is the most specific (largest prefix length) that still matches the destination IP.
From the options:

  • A) 10.10.10.0/28 ? 10.10.10.0–10.10.10.15
  • B) 10.10.13.0/25 ? 10.10.13.0–10.10.13.127
  • C) 10.10.13.144/28 ? 10.10.13.144–10.10.13.159
  • D) 10.10.13.208/29 ? 10.10.13.208–10.10.13.215

The destination Host A’s IP must fall within 10.10.13.208–10.10.13.215 for the /29 to be the best match. Since /29 is the longest prefix among the matching options, Router1 will use 10.10.13.208/29.
Thus, the correct answer is D.

S
srameh
4/14/2026 10:09:29 AM

Question 3:

  • Correct answer: Phase 4, Post Accreditation

  • Explanation:
- In DITSCAP, the four phases are: - Phase 1: Definition (concept and requirements) - Phase 2: Verification (design and testing) - Phase 3: Validation (fielding and evaluation) - Phase 4: Post Accreditation (ongoing operations and lifecycle management) - The description—continuing operation of an accredited IT system and addressing changing threats throughout its life cycle—fits the Post Accreditation phase, which covers operations, maintenance, monitoring, and reauthorization as threats and environment evolve.

O
onibokun10
4/13/2026 7:50:14 PM

Question 129:
Correct answer: CNAME

  • A CNAME record creates an alias for a domain, so newapplication.comptia.org will resolve to whatever IP address www.comptia.org resolves to. This ensures both names point to the same resource without duplicating the IP.
  • Why not the others:
- SOA defines authoritative information for a zone. - MX specifies mail exchange servers. - NS designates name servers for a zone.
  • Notes: The alias name (newapplication.comptia.org) should not have other records if you use a CNAME for it, and CNAMEs aren’t used for the zone apex (root) domain. This scenario uses a subdomain, so a CNAME is appropriate.

A
Anonymous User
4/13/2026 6:29:58 PM

Question 1:

  • Correct answer: C

  • Why this is best:
- Uses OS Login with IAM, so SSH access is granted via Google accounts rather than distributing per-user SSH keys. - Granting the compute.osAdminLogin role to a Google group gives admin access to all team members in a centralized, auditable way. - Access is auditable: Cloud Audit Logs show who accessed which VM, satisfying the security requirement to determine who accessed a given instance.
  • How it works:
- Enable OS Login on the project/instances (enable-oslogin metadata). - Add the team’s

A
Anonymous User
4/13/2026 1:00:51 PM

Question 2:

  • Answer: D. Azure Advisor

  • Why: To view security-related recommendations for resources in the Compute and Apps area (including App Service Web Apps and Functions), you use Azure Advisor. Advisor surfaces personalized best-practice recommendations across resources, including security, and shows which resources are affected and the severity.

  • Why not the others:
- Azure Log Analytics is for ad-hoc querying of telemetry, not for viewing security recommendations. - Azure Event Hubs is for streaming telemetry data, not for security recommendations.
  • Quick tip: In the portal, navigate to Azure Advisor and check the Security recommendations for App Services to see actionable items and affe

D
Don
4/11/2026 5:36:42 AM

Recommend using AI for Solutions rather the Answer(s) submitted here

M
Mogae Malapela
4/8/2026 6:37:56 AM

This is very interesting

A
Anon
4/6/2026 5:22:54 PM

Are these the same questions you have to pay for in ExamTopics?

L
LRK
3/22/2026 2:38:08 PM

For Question 7 - while the answer description indicates the correct answer, the option no. mentioned is incorrect. Nice and Comprehensive. Thankyou

R
Rian
3/19/2026 9:12:10 AM

This is very good and accurate. Explanation is very helpful even thou some are not 100% right but good enough to pass.

G
Gerrard
3/18/2026 6:58:37 AM

The DP-900 exam can be tricky if you aren't familiar with Microsoft’s specific cloud terminology. I used the practice questions from free-braindumps.com and found them incredibly helpful. The site breaks down core data concepts and Azure services in a way that actually mirrors the real test. As a resutl I passed my exam.

V
Vineet Kumar
3/6/2026 5:26:16 AM

interesting

J
Joe
1/20/2026 8:25:24 AM

Passed this exam 2 days ago. These questions are in the exam. You are safe to use them.

N
NJ
12/24/2025 10:39:07 AM

Helpful to test your preparedness before giving exam

A
Ashwini
12/17/2025 8:24:45 AM

Really helped

J
Jagadesh
12/16/2025 9:57:10 AM

Good explanation

S
shobha
11/29/2025 2:19:59 AM

very helpful

P
Pandithurai
11/12/2025 12:16:21 PM

Question 1, Ans is - Developer,Standard,Professional Direct and Premier

E
Einstein
11/8/2025 4:13:37 AM

Passed this exam in first appointment. Great resource and valid exam dump.

D
David
10/31/2025 4:06:16 PM

Today I wrote this exam and passed, i totally relay on this practice exam. The questions were very tough, these questions are valid and I encounter the same.

T
Thor
10/21/2025 5:16:29 AM

Anyone used this dump recently?

V
Vladimir
9/25/2025 9:11:14 AM

173 question is A not D

K
khaos
9/21/2025 7:07:26 AM

nice questions

K
Katiso Lehasa
9/15/2025 11:21:52 PM

Thanks for the practice questions they helped me a lot.

E
Einstein
9/2/2025 7:42:00 PM

Passed this exam today. All questions are valid and this is not something you can find in ChatGPT.

V
vito
8/22/2025 4:16:51 AM

i need to pass exam for VMware 2V0-11.25

M
Matt
7/31/2025 11:44:40 PM

Great questions.

O
OLERATO
7/1/2025 5:44:14 AM

great dumps to practice for the exam

AI Tutor 👋 I’m here to help!