Amazon
Anthropic
Avaya
Cisco
CompTIA
CrowdStrike
EC-Council
EXIN
Fortinet
Google
ISC
ISC2
ITIL
Juniper
Microsoft
NVIDIA
Palo Alto Networks
Salesforce
SAP
VMware
All Vendors

Microsoft Dynamics 365 Supply Chain Management MB-330 Dumps in PDF

Free Microsoft MB-330 Real Questions (page: 8)

MB-330 PDF — 464 Questions

You are implementing Dynamics 365 Supply Chain Management for a company that uses bill of materials (BOM) templates to expedite setup in the system.

A line must be removed from the BOM, but the system does not allow this.

You need to determine why you are unable to perform this deletion.

Why are you unable to delete the line?

  1. The BOM template version has already been saved.
  2. The local version of the BOM template has been associated to a service object.
  3. The local version of the BOM template has been modified.
  4. The BOM template has been associated to a service object.

Answer(s): D


Reference:

https://docs.microsoft.com/en-us/dynamics365/supply-chain/service-management/template-boms



DRAG DROP (Drag and Drop is not supported!)

A company is designing a new bicycle by using a dimension-based Bill of materials (BOM).

The configuration groups have been defined and created.

You need to set up a BOM for the new bicycle.

Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Select and Place:

  1. See Explanation section for answer.

Answer(s): A

Explanation:


Reference:

https://docs.microsoft.com/en-us/dynamics365/supply-chain/pim/dimension-based-product-configuration



A company uses Dynamics 365 Supply Chain Management.

The company obtains packaging cartons in metric tons and sells them as individual items. The packaging cartons come in various sizes and are maintained as product variants.

You need to configure unit conversion for the packaging cartons.

What should you do?

  1. Enable unit of measure conversions in the product master. Configure the intra-class unit conversion feature in the Organization administration module.
  2. Disable unit of measure conversions in the product master. Configure the inter-class unit conversion feature in the Organization administration module.
  3. Enable unit of measure conversions in the product master. Configure the inter-class unit conversion feature in the released products.
  4. Enable unit of measure conversions in the product master. Configure the intra-class unit conversion feature in the released products.

Answer(s): D

Explanation:

Step 1: Enable unit of measure conversions in the product master.
Step 2: Configure the standard unit conversion feature in the Organization administration module.
Note:
Unit of measure conversions for product variants
For a specific product master, the feature is enabled by selecting the Enable unit of measure conversions field on the Product details page.
From the Product master you can open the Unit conversions page. On this page, you first select whether you are setting up the unit conversion for the product or the product variant.
Note: Select one of the following tabs, depending on the type of conversion that you want to set up:
Standard conversions Set up standard conversion rules for all products.
Intra-class conversions Set up product-specific conversion rules for units in the same unit class.
Inter-class conversions Set up product-specific conversion rules for units across unit classes.


Reference:

https://learn.microsoft.com/en-us/business-applications-release-notes/april19/dynamics365-finance-operations/ uom-by-variant https://learn.microsoft.com/en-us/dynamics365/supply-chain/pim/tasks/manage-unit-measure



DRAG DROP (Drag and Drop is not supported!)

A company uses Dynamics 365 Supply Chain Management.

The company needs to maintain item bar codes.

You need to set up bar codes for the items.

Which option should you use for each requirement? To answer, drag the appropriate options to the correct requirements. Each option may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

Note: Each correct selection is worth one point.

Select and Place:

  1. See Explanation section for answer.

Answer(s): A

Explanation:


Reference:

https://docs.microsoft.com/en-us/dynamicsax-2012/appuser-itpro/use-bar-codes-in-warehouse-operations



A company that has two legal entities is implementing Dynamics 365 Supply Chain Management. Products do not contain variants. One legal entity will use advanced warehouse management and the other legal entity will not use it.

The same product will be sold in both legal entities but require different setup due to the warehousing requirements.

You need to set up the product in both legal entities without duplicating efforts or item numbers.

Which method should you use?

  1. released product data entity
  2. product master
  3. released product
  4. item template
  5. product

Answer(s): E



DRAG DROP (Drag and Drop is not supported!)

You create and maintain items in Dynamics 365 Supply Chain Management.

You create a product master named S-001 for metal bolts. Bolts come in three different lengths and two styles. You want to release only five of the six possible combinations.

You need to set up variants for the bolts.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Select and Place:

  1. See Explanation section for answer.

Answer(s): A

Explanation:


Reference:

https://docs.microsoft.com/en-us/dynamics365/supply-chain/pim/tasks/create-predefined-product-variants



A company uses Dynamics 365 Supply Chain Management.

The company does not use variants and sells items only out of a single legal entity.

You need to configure the system to avoid unnecessary product creation overhead.

What should you do?

  1. Create a released product master
  2. Create a personal template for unreleased products
  3. Create a released product
  4. Create an unreleased product and release the product
  5. Create a shared template for unreleased products

Answer(s): C


Reference:

https://docs.microsoft.com/en-us/dynamics365/supply-chain/pim/product-information



A company uses Dynamics 365 Supply Chain Management. Inventory value is standard and updated only once per year.

The company wants to convert costing from standard to moving average.

You need to convert the items from standard to moving average.

Which three actions must you perform? Each answer presents a partial solution.

Note: Each correct selection is worth one point.

  1. Change the Item Group
  2. Adjust the inventory quantity to zero
  3. Adjust the inventory cost to zero
  4. Run inventory close
  5. Change the Item Model Group

Answer(s): B,C,E


Reference:

https://docs.microsoft.com/en-us/dynamics365/supply-chain/cost-management/moving-average



PDF
Viewing page 8 of 58

Share your comments for Microsoft MB-330 exam with other users:

A
AI Tutor Explanation
5/10/2026 12:51:57 AM

Which statement is true about using default environment variables? The environment variables can be read in workflows using the ENV: variable_name syntax. The environment variables created should be prefixed with GITHUB_ to ensure they can be accessed in workflows The environment variables can be set in the defaults: sections of the workflow The GITHUB_WORKSPACE environment variable should be used to access files from within the runner.
Correct answer: The statement "The GITHUB_WORKSPACE environment variable should be used to access files from within the runner." is true.
Why the others are false:

  • ENV: variable_name syntax is not how you read env vars in workflows. Use ${{ env.VARIABLE }} in expressions or $VARIABLE in a shell.
  • Environment variables don’t need a GITHUB_ prefix. Custom vars can have any name; GITHUB_ is only for built-in, predefined vars.
  • defaults: cannot set environment variables. It configures defaults for run steps (like shell or working-directory), not env vars.

Extra tip:
  • GITHUB_WORKSPACE (or ${{ github.workspace }}) is the root path on the runner where the repository is checked out. Use it to access files, e.g., $GITHUB_WORKSPACE/... or ${{ github.workspace }}/....

New Delhi, India
A
AI Tutor Explanation
5/7/2026 11:34:48 PM

As an administrator for this subscription, you have been tasked with recommending a solution that prohibits users from copying corporate information from managed applications installed on unmanaged devices. Which of the following should you recommend? Windows Virtual Desktop. Microsoft Intune. Windows AutoPilot. Azure AD Application Proxy.

  • Microsoft Intune

Reason: Intune can enforce app protection policies (MAM) on managed apps, even on unmanaged devices, to prevent data leakage (e.g., restricting copy/paste, saving to non-approved apps, etc.). The other options don’t address data protection within apps on unmanaged devices.

Oslo, Norway
A
AI Tutor Explanation
5/4/2026 2:43:10 AM

Question 34:

  • Question 34 asks: Which role(s) has the capability to create Policies? Choose two.
  • Likely correct roles: Compliance Manager and Compliance admin (A and B). These roles typically have policy governance rights to create and manage policies.
  • Why not the others: Compliance User is usually a limited user, not allowed to create policies. Risk Manager focuses on risks, not policy creation in standard setups.
  • Note on the provided key: The answer shown is “C” (Compliance User), which conflicts with “Choose two.” This is probably a key error. In practice, verify against your instance’s ACLs or official docs.
  • Quick check tip: In ServiceNow, review the ACLs and role permissions for the Policy records to see which roles can create policies.

New Delhi, India
A
AI Tutor Explanation
4/29/2026 11:59:58 PM

function of appnav in sdwan

  • AppNav (Application Navigation) is the Cisco SD-WAN feature that provides application-level visibility and control.
  • It maintains a catalog of applications (AppIDs) with attributes (ports/protocols, categories) and classifies traffic accordingly.
  • It allows policy authors to reference apps by name in policies, enabling application-aware routing, QoS, and service chaining based on the app’s requirements.
  • The SD-WAN fabric uses AppNav data to steer traffic along the best path, improving user experience for critical apps while optimizing WAN usage.

Sydney, Australia
A
AI Tutor Explanation
4/29/2026 5:25:25 AM

Question 1:

  • Correct answer: C. Extract the hardware ID information of each computer to a CSV file and upload the file from the Microsoft Intune admin center.

  • Why this is correct

Durban, South Africa
A
AI Tutor Explanation
4/29/2026 5:23:14 AM

Question 5:

  • Correct answer: A. User4 and User1 only

  • Why this is correct:
- The Automatic Enrollment setting in Intune has MDM user scope: GroupA. Only users in GroupA can enroll devices via MDM auto-enrollment. - Device6 will be enrolled via Windows Autopilot and Intune, so enrollment is allowed only for users in GroupA. - Based on the group memberships in the scenario, User4 and User1 are in GroupA, while User2 and User3 are not. Therefore only User4 and User1 can enroll Device6.
  • Quick tip for the exam:
- Remember: MDM user scope determines who can auto-enroll devices; MAM scope controls app protection enrollment. When a new Autopilot device is enrolled, the signing-in user must be in the MDM scope.

Durban, South Africa
A
AI Tutor Explanation
4/29/2026 5:17:10 AM

Why this is correct

  • Correct answer: C. Extract the hardware ID information of each computer to a CSV file and upload the file from the Microsoft Intune admin center.

  • Why this is correct:
- Windows Autopilot requires devices to be registered by their hardware IDs (hash) before Autopilot can deploy Windows 10 Enterprise. - Collect the hardware IDs from the new Phoenix machines, save them in a CSV, and upload that CSV in the Intune/Windows Autopilot area. This maps each device to an Autopilot deployment profile. - After registration, you can assign Autopilot profiles (Windows 10 Enterprise, etc.). Other options (serial number CSV, generalizing, or Mobility settings) are not the initial Autopilot registration steps.

Durban, South Africa
A
AI Tutor Explanation
4/25/2026 1:53:46 PM

Question 7:

  • Correct answer: B — A risk score is computed based on the number of remediations needed compared to the industry peer average.

Explanation:
  • Risk360 uses a remediation-based score. It benchmarks how many actions are required to fix issues against peers, giving a relative risk posture.
  • Why not the others:
- A: Not just total risk events by location. - C: Time to mitigate isn’t the primary scoring method. - D: Not a four-stage breach scoring approach.
Note: The page text shows a mismatch (it lists D as the answer), but the study guide describes the remediation-based scoring (B) as the correct concept.

New Delhi, India
A
AI Tutor Explanation
4/25/2026 1:42:20 PM

Question 104:

  • Correct answer: D) Multi-Terabyte (TB) Range

  • Brief explanation:
- clustering keys organize data into micro-partitions to improve pruning when queries filter on those columns. - The performance benefit is most significant for very large tables; for small tables the overhead of maintaining clustering outweighs gains. - Therefore, as a best practice, define clustering keys on tables at the TB scale.

Thane, India
C
Community Helper
4/25/2026 2:03:10 AM

Q23: Fabric Admin is correct. Because Domain admin cannot create domains. Only Fabric Admin can among the given options. Q51: Wrapping @pipeline.parameter.param1 inside {} will return a string. But question requires the expression to return Int, so correct answer should be @pipeline.parameter.param1 (no {})

New Delhi, India
A
AI Tutor Explanation
4/23/2026 3:07:03 PM

Question 62:

  • Correct answer: D (per the page)

  • Note: The explanation text on the page describes option B (use ZDX score and Analyze Score to trigger the Y Engine analysis), indicating a mismatch between the stated answer and the rationale.

  • Key concept: For fast root-cause analysis, leverage telemetry and auto-correlated insights:
- Use the user’s ZDX score for AWS and run Analyze Score to activate the Y Engine, which correlates metrics across network, client, and application to pinpoint the issue quickly.
  • Why the other options are less effective:
- A: Only checks for outages; doesn’t provide actionable root-cause analysis. - C: Deep Trace helps visibility but is manual and time-consuming. - D: Packet capture is invasive and slow; not the quickest path to root cause.

Coimbatore, India
A
AI Tutor Explanation
4/23/2026 12:26:21 PM

Question 32:

  • Answer: A (2.4GHz)

  • Why: Lower-frequency signals have longer wavelengths and experience less attenuation when passing through walls and obstacles. Higher frequencies (5GHz, 6GHz) are more easily blocked by walls. NFC operates over very short distances and is not meant to penetrate walls. So 2.4 GHz best penetrates physical objects like walls.

Allen, United States
A
AI Tutor Explanation
4/21/2026 8:48:36 AM

Question 3:

  • False is the correct answer (Option B).

Why:
  • In Snowflake, a database is a metadata object that exists within a single Snowflake account. Accounts are isolated—there isn’t one database that lives in multiple accounts.
  • You can access data across accounts via data sharing or database replication, but these create separate database objects in the other accounts (e.g., a database in the consumer account created from a share), not a single shared database across accounts.

So a single database cannot exist in more than one Snowflake account.

Thane, India
A
Anonymous User
4/16/2026 10:54:18 AM

Question 1:

  • Correct answer: E — date = sys.argv[1]
  • Why this is correct:
- When a Databricks Job passes parameters to a notebook, those parameters are supplied to the notebook's Python process as command-line arguments. The first argument after the script name is sys.argv[1], so date = sys.argv[1] captures the passed date value directly.
  • How it compares to other options:
- date = spark.conf.get("date") reads from Spark config, not from job parameters. - input() waits for user input at runtime, which isn’t how job parameters are provided. - date = dbutils.notebooks.getParam("date") would work if the notebook were invoked via dbutils.notebook.run with parameters, not

Innisfil, Canada
A
Anonymous User
4/15/2026 4:42:07 AM

Question 528:

  • Correct answer: NSG flow logs for NSG1 (Option B)

  • Why:
- Traffic Analytics uses NSG flow logs to analyze traffic patterns. You must have NSG flow logs enabled for the NSGs you want to monitor. - An Azure Log Analytics workspace is also required to store and query the traffic data. - Network Watcher must be available in the subscription for traffic analytics to function.
  • What to configure (brief steps):
- Ensure Network Watcher is enabled in the East US region (for the subscription/region). - Enable NSG flow logs on NSG1. - Ensure a Log Analytics workspace exists and is accessible (read/write) so Traffic Analytics can store and query logs.
  • Why other options aren’t correct:
- “Diagnostic settings for VM1” or “Diagnostic settings for NSG1” alone don’t guarantee flow logs are captured and sent to Log Analytics, which Traffic Analytics relies on. - “Insights for VM1” is not how Traffic Analytics collects traffic data.

Hamburg, Germany
A
Anonymous User
4/15/2026 2:43:53 AM

Question 23:
The correct answer is Domain admin (option B), not Fabric admin.

  • Domain admin provides domain-level management: create domains/subdomains and assign workspaces within those domains, which matches the tasks while following least privilege.
  • Fabric admin is global-level access and is more privileges than needed for this scenario (it would grant broader control across the Fabric environment).

Kottayam, India
A
Anonymous User
4/14/2026 12:31:34 PM

Question 2:
For question 2, the key concept is the Longest Prefix Match. Routers pick the route whose subnet mask is the most specific (largest prefix length) that still matches the destination IP.
From the options:

  • A) 10.10.10.0/28 ? 10.10.10.0–10.10.10.15
  • B) 10.10.13.0/25 ? 10.10.13.0–10.10.13.127
  • C) 10.10.13.144/28 ? 10.10.13.144–10.10.13.159
  • D) 10.10.13.208/29 ? 10.10.13.208–10.10.13.215

The destination Host A’s IP must fall within 10.10.13.208–10.10.13.215 for the /29 to be the best match. Since /29 is the longest prefix among the matching options, Router1 will use 10.10.13.208/29.
Thus, the correct answer is D.

Canada
S
srameh
4/14/2026 10:09:29 AM

Question 3:

  • Correct answer: Phase 4, Post Accreditation

  • Explanation:
- In DITSCAP, the four phases are: - Phase 1: Definition (concept and requirements) - Phase 2: Verification (design and testing) - Phase 3: Validation (fielding and evaluation) - Phase 4: Post Accreditation (ongoing operations and lifecycle management) - The description—continuing operation of an accredited IT system and addressing changing threats throughout its life cycle—fits the Post Accreditation phase, which covers operations, maintenance, monitoring, and reauthorization as threats and environment evolve.

France
O
onibokun10
4/13/2026 7:50:14 PM

Question 129:
Correct answer: CNAME

  • A CNAME record creates an alias for a domain, so newapplication.comptia.org will resolve to whatever IP address www.comptia.org resolves to. This ensures both names point to the same resource without duplicating the IP.
  • Why not the others:
- SOA defines authoritative information for a zone. - MX specifies mail exchange servers. - NS designates name servers for a zone.
  • Notes: The alias name (newapplication.comptia.org) should not have other records if you use a CNAME for it, and CNAMEs aren’t used for the zone apex (root) domain. This scenario uses a subdomain, so a CNAME is appropriate.

Swindon, United Kingdom
A
Anonymous User
4/13/2026 6:29:58 PM

Question 1:

  • Correct answer: C

  • Why this is best:
- Uses OS Login with IAM, so SSH access is granted via Google accounts rather than distributing per-user SSH keys. - Granting the compute.osAdminLogin role to a Google group gives admin access to all team members in a centralized, auditable way. - Access is auditable: Cloud Audit Logs show who accessed which VM, satisfying the security requirement to determine who accessed a given instance.
  • How it works:
- Enable OS Login on the project/instances (enable-oslogin metadata). - Add the team’s

Germany
A
Anonymous User
4/13/2026 1:00:51 PM

Question 2:

  • Answer: D. Azure Advisor

  • Why: To view security-related recommendations for resources in the Compute and Apps area (including App Service Web Apps and Functions), you use Azure Advisor. Advisor surfaces personalized best-practice recommendations across resources, including security, and shows which resources are affected and the severity.

  • Why not the others:
- Azure Log Analytics is for ad-hoc querying of telemetry, not for viewing security recommendations. - Azure Event Hubs is for streaming telemetry data, not for security recommendations.
  • Quick tip: In the portal, navigate to Azure Advisor and check the Security recommendations for App Services to see actionable items and affe

    Brazil
D
Don
4/11/2026 5:36:42 AM

Recommend using AI for Solutions rather the Answer(s) submitted here

Hamburg, Germany
M
Mogae Malapela
4/8/2026 6:37:56 AM

This is very interesting

Gaborone, Botswana
A
Anon
4/6/2026 5:22:54 PM

Are these the same questions you have to pay for in ExamTopics?

Amsterdam, The Netherlands
L
LRK
3/22/2026 2:38:08 PM

For Question 7 - while the answer description indicates the correct answer, the option no. mentioned is incorrect. Nice and Comprehensive. Thankyou

Paris, France
R
Rian
3/19/2026 9:12:10 AM

This is very good and accurate. Explanation is very helpful even thou some are not 100% right but good enough to pass.

United States
G
Gerrard
3/18/2026 6:58:37 AM

The DP-900 exam can be tricky if you aren't familiar with Microsoft’s specific cloud terminology. I used the practice questions from free-braindumps.com and found them incredibly helpful. The site breaks down core data concepts and Azure services in a way that actually mirrors the real test. As a resutl I passed my exam.

United States
V
Vineet Kumar
3/6/2026 5:26:16 AM

interesting

Anonymous
J
Joe
1/20/2026 8:25:24 AM

Passed this exam 2 days ago. These questions are in the exam. You are safe to use them.

UNITED STATES
N
NJ
12/24/2025 10:39:07 AM

Helpful to test your preparedness before giving exam

Anonymous
A
Ashwini
12/17/2025 8:24:45 AM

Really helped

Anonymous
J
Jagadesh
12/16/2025 9:57:10 AM

Good explanation

INDIA
S
shobha
11/29/2025 2:19:59 AM

very helpful

INDIA
P
Pandithurai
11/12/2025 12:16:21 PM

Question 1, Ans is - Developer,Standard,Professional Direct and Premier

Anonymous
AI Tutor 👋 I’m here to help!