A client is connected to an AOS-CX switch, which tunnels the client's traffic to an AOS-10 gateway. The gateway assigns the client to a role with these rules: any any svc-dhcp permit user alias hostl svc-dns permit user alias net1 svc-https permit user alias net2 tcp 8086 permit user alias net3 any deny user alias net4 svc-https permit The gateway has these aliases defined: - host1 = 10.0.6.8 - net1 = 10.0.0.0 255.255.252.0 - net2 = 10.0.3.0 255.255.255.0 - net3 = 10.0.0.0 255.255.248.0 - net4 = 10.0.0.0 255.255.0.0 The client sends two packets: - 1: tcp 8086 to 10.0.3.75 - 2: https to 10.0.7.24 What happens?
Answer(s): D
You are designing an AOS-10 architecture and ClearPass solution for a manufacturing company. The company that has legacy equipment that is only WPA2 capable. You need to enhance security for these devices. This equipment will connect to an SSID named "Factory." If the equipment passes authentication and receives custom Device Category "Manufacturing," it should receive this AOS user role: "equipment." That role and a "profiling" role for unprofiled devices are already configured on the AOS devices. The users responsible for configuring PSKs on the equipment belong to the "FactoryAdmins" group in the company's Active Directory domain. CPPM has an authentication source for that domain named MyAD. As part of the solution, you have created these services on CPPM: - Service 1: - Type: Application - Authentication source: MyAD - Authorization source: None - Enforcement policy: - Rule 1 condition: Authorization:Endpoints Repository:Category EQUALS Manufacturing - Rule 1 profile list: Enforcement profiles that permit application access and assign the Guest Operators role - Default action: Deny access - Service 2 - Type: Wireless with mPSK - Authentication source: Guest Devices Repository - Authorization source: None - Enforcement policy: - Rule 1 condition: Endpoint Device Insight Tag EQUALS Manufacturing - Rule 1 profile list: Enforcement profile that assigns Aruba-User-Role = equipment and [Registered Device MPSK] profile - Rule 2 condition: Endpoint:Device Insight Tag NOT_EXISTS - Rule 2 profile list: Enforcement profile that assigns Aruba-User-Role = profiling and [Registered Device MPSK] profile - Default action: Deny access What is an error in this configuration?
Answer(s): A
Introduction to the customer: You are helping a company add HPE Aruba Networking ClearPass to their network, which uses HPE Aruba Networking network infrastructure devices. The company currently has a Windows domain and Windows CA. The Window CA issues certificates to domain computers, domain users, and servers such as domain controllers. An example of a certificate issued by the Windows CA is shown here.ClearPass cluster IP addressing and hostnames:A customer's ClearPass cluster has these IP addresses: • Publisher = 10.47.47.5 • Subscriber 1 = 10.47.47.6 • Subscriber 2 = 10.47.47.7 • Virtual IP with Subscriber 1 and Subscriber 2 = 10.47.47.8 The customer's DNS server has these entries • cp.acnsxtest.com = 10.47.47.5 • cps1.acnsxtest.com = 10.47.47.6 • cps2.acnsxtest.com = 10.47.47.7 • radius.acnsxtest.com = 10.47.47.8 • onboard.acnsxtest.com = 10.47.47.8 Refer to the scenario. You have imported the root certificate for the Windows CA to the ClearPass CA Trust list. Which usages should you add to it based on the scenario requirements?
Answer(s): B
Introduction to the customer: You are helping a company add HPE Aruba Networking ClearPass to their network, which uses HPE Aruba Networking network infrastructure devices. The company currently has a Windows domain and Windows CA. The Window CA issues certificates to domain computers, domain users, and servers such as domain controllers. An example of a certificate issued by the Windows CA is shown here.ClearPass cluster IP addressing and hostnames:A customer's ClearPass cluster has these IP addresses: • Publisher = 10.47.47.5 • Subscriber 1 = 10.47.47.6 • Subscriber 2 = 10.47.47.7 • Virtual IP with Subscriber 1 and Subscriber 2 = 10.47.47.8 The customer's DNS server has these entries • cp.acnsxtest.com = 10.47.47.5 • cps1.acnsxtest.com = 10.47.47.6 • cps2.acnsxtest.com = 10.47.47.7 • radius.acnsxtest.com = 10.47.47.8 • onboard.acnsxtest.com = 10.47.47.8 Refer to the scenario. You have started to create a CA to meet the customer's requirements for issuing certificates to mobile clients, as shown in the exhibit below.What change will help to meet those requirements and the requirements for authenticating clients?
Introduction to the customer: You are helping a company add HPE Aruba Networking ClearPass to their network, which uses HPE Aruba Networking network infrastructure devices. The company currently has a Windows domain and Windows CA. The Window CA issues certificates to domain computers, domain users, and servers such as domain controllers. An example of a certificate issued by the Windows CA is shown here.ClearPass cluster IP addressing and hostnames:A customer's ClearPass cluster has these IP addresses: • Publisher = 10.47.47.5 • Subscriber 1 = 10.47.47.6 • Subscriber 2 = 10.47.47.7 • Virtual IP with Subscriber 1 and Subscriber 2 = 10.47.47.8 The customer's DNS server has these entries • cp.acnsxtest.com = 10.47.47.5• cps1.acnsxtest.com = 10.47.47.6 • cps2.acnsxtest.com = 10.47.47.7 • radius.acnsxtest.com = 10.47.47.8 • onboard.acnsxtest.com = 10.47.47.8 Refer to the scenario. Assume that you have set up CPPM to assign HPE Aruba Networking ClearPass roles and AOS user roles as indicated in the scenario. However, a penetration tester was able to access the network with medical staff privileges on a client with a valid computer certificate but revoked medical user certificate. In this circumstance, the customer wants the client to receive computer-only access. What can you do to correct this issue while still meeting the other customer requirements?
Introduction to the customer: You are helping a company add HPE Aruba Networking ClearPass to their network, which uses HPE Aruba Networking network infrastructure devices. The company currently has a Windows domain and Windows CA. The Window CA issues certificates to domain computers, domain users, and servers such as domain controllers. An example of a certificate issued by the Windows CA is shown here.ClearPass cluster IP addressing and hostnames:A customer's ClearPass cluster has these IP addresses: • Publisher = 10.47.47.5 • Subscriber 1 = 10.47.47.6 • Subscriber 2 = 10.47.47.7 • Virtual IP with Subscriber 1 and Subscriber 2 = 10.47.47.8 The customer's DNS server has these entries • cp.acnsxtest.com = 10.47.47.5 • cps1.acnsxtest.com = 10.47.47.6 • cps2.acnsxtest.com = 10.47.47.7 • radius.acnsxtest.com = 10.47.47.8 • onboard.acnsxtest.com = 10.47.47.8 Refer to the scenario. You have created a role mapping policy as shown in the exhibits below.What is one change that you need to make to this policy?
Introduction to the customer: You are helping a company add HPE Aruba Networking ClearPass to their network, which uses HPE Aruba Networking network infrastructure devices. The company currently has a Windows domain and Windows CA. The Window CA issues certificates to domain computers, domain users, and servers such as domain controllers. An example of a certificate issued by the Windows CA is shown here.ClearPass cluster IP addressing and hostnames:A customer's ClearPass cluster has these IP addresses: • Publisher = 10.47.47.5 • Subscriber 1 = 10.47.47.6• Subscriber 2 = 10.47.47.7 • Virtual IP with Subscriber 1 and Subscriber 2 = 10.47.47.8 The customer's DNS server has these entries • cp.acnsxtest.com = 10.47.47.5 • cps1.acnsxtest.com = 10.47.47.6 • cps2.acnsxtest.com = 10.47.47.7 • radius.acnsxtest.com = 10.47.47.8 • onboard.acnsxtest.com = 10.47.47.8 Refer to the scenario. The customer has now decided that it needs CPPM to assign certain mobile-onboarded devices to a "nurse-call" AOS user role. These are mobile-onboarded devices that are communicating with IP address 10.1.18.12 using port 4343. What are the prerequisites for fulfilling this requirement?
Introduction to the customer: You are helping a company add HPE Aruba Networking ClearPass to their network, which uses HPE Aruba Networking network infrastructure devices. The company currently has a Windows domain and Windows CA. The Window CA issues certificates to domain computers, domain users, and servers such as domain controllers. An example of a certificate issued by the Windows CA is shown here.ClearPass cluster IP addressing and hostnames:A customer's ClearPass cluster has these IP addresses: • Publisher = 10.47.47.5 • Subscriber 1 = 10.47.47.6 • Subscriber 2 = 10.47.47.7 • Virtual IP with Subscriber 1 and Subscriber 2 = 10.47.47.8 The customer's DNS server has these entries • cp.acnsxtest.com = 10.47.47.5 • cps1.acnsxtest.com = 10.47.47.6 • cps2.acnsxtest.com = 10.47.47.7 • radius.acnsxtest.com = 10.47.47.8 • onboard.acnsxtest.com = 10.47.47.8 The customer needs a secure way for users to enroll their new wireless clients in Intune. You are recommending a new WLAN that will provide the users with limited access for the enrollment. You have set up captive portal for clients on this WLAN to a web page with instructions for enrolling devices. You will need to add several hostnames to the captive portal allowlist manually. What is one of those hostnames?
Share your comments for HP HPE7-A10 exam with other users:
Question 6:Correct answer: A — Move rule 1 to the bottom of the list. I can’t see the role-mapping exhibit itself, but the key concept is ClearPass role-mapping rule order. Rules are evaluated from top to bottom, and a broad rule placed first can match a certificate before a more specific rule gets a chance to assign the intended role. Typically:
Issuer-CN
Subject-CN
Question 4:Correct answer: D — Specify an OCSP responder and set the hostname to localhost. The question describes creating a ClearPass local CA to issue certificates to mobile clients. Those certificates must also be usable for client authentication, which requires a revocation-checking mechanism.
localhost