HP HPE7-A08 Exam (page: 1)
HP E Network Switching Professional
Updated on: 12-Feb-2026

Viewing Page 1 of 11

Refer to the partial exhibit from an HPE Aruba Networking CX 8325:



A new port 1/1/44 needs to be configured to connect to a 29301, which has the following configuration:



Which configuration would be used?





Answer(s): A



OSPF peering is configured between HPE Aruba Networking CX 6300 switches utilizing BFD. You've made this configuration on switch B, while switch A is in the default configuration:



Which BFD Tx/Rx interval values will switch A use for the show bfd session?

  1. Switch A show BFD sessions using 500ms
  2. Switch A show BFD sessions using 6000ms
  3. Switch A show BFD sessions using 2000ms
  4. Switch A show BFD sessions using 300ms

Answer(s): C



You have applied the following OSPF configuration but are seeing the output from the command below.
What is the reason for this?

  1. A loopback interface hasn't been configured on Agg-2
  2. OSPF interfaces are passive by default
  3. A different OSPF process ID is used on each switch
  4. A Layer-3 interface has not been associated with a VRF

Answer(s): D



You need to run a packet capture on a CX switch and be able to view the full output on a remote device in real-time.
What is the best way to do this?

  1. Configure a mirror session using ERSPAN to a computer running Wireshark
  2. Inspect the summary of the packets in real time on the switch using tcpdump
  3. Configure a mirror session with another port on the switch as the destination
  4. Configure a mirror session to the CPU, use tshark to capture it to a PCAP file

Answer(s): A



When configuring a multicast solution on HPE Aruba Networking CX switches, what needs to be configured on the access switch to enable efficient traffic flow?

  1. PIM on VLAN
  2. IGMP-snooping on VLAN
  3. IGMP on VLAN
  4. IGMP-snooping on SVI

Answer(s): B



You are deploying a pair of VSX switches parallel to some existing HPE Comware switches. You would like to configure a common first-hop redundancy protocol as part of your migration strategy.
Which of these would be suitable?

  1. Active Forwarding
  2. HSRP
  3. VRRP
  4. Active Gateway

Answer(s): C



What does it mean when an event like the one below is seen on the HPE Aruba Networking CX switch?
2024-04-04T08:35:38.312254+00:00 ICX-Core-1 hpe-vaxd[2167]:
Event[701|LOG_INFO|AMM1/1|VSX2 state local up, remote down]

  1. VSX secondary switch is down.
  2. VSX keepalive has detected that the secondary member is down.
  3. The multichassis LAG 2 interface is down on both switches.
  4. The physical interface of LAG 2 on the secondary VSX member is down.

Answer(s): A



A Linux SFTP server is configured for IP address 192.168.1.100, and the CX 6325 switch has a management IP address 192.168.1.200.
How can you back up the saved switch configuration to a remote location?

  1. Use the command copy startup-config scp://user@192.168.1.100/switch_config.cfg vrf default on the switch.
  2. Use the command scp admin@192.168.1.200:/running-config on the SFTP server.
  3. Use the command copy startup-config sftp://user@192.168.1.100/switch_config.cfg vrf mgmt on the switch.
  4. Use the command scp admin@192.168.1.200:/startup-config on the SFTP server.

Answer(s): C



Viewing Page 1 of 11



Share your comments for HP HPE7-A08 exam with other users:

Thembelani 5/30/2023 2:22:00 AM

anyone who wrote this exam recently
Anonymous


P 9/16/2023 1:27:00 AM

ok they re good
Anonymous


Jorn 7/13/2023 5:05:00 AM

relevant questions
UNITED KINGDOM


AM 6/20/2023 7:54:00 PM

please post
UNITED STATES


Nagendra Pedipina 7/13/2023 2:22:00 AM

q:42 there has to be a image in the question to choose what does it mean from the options
INDIA


BrainDumpee 11/18/2023 1:36:00 PM

looking for cphq dumps, where can i find these for free? please and thank you.
UNITED STATES


sheik 10/14/2023 11:37:00 AM

@aarun , thanks for the information. it would be great help if you share your email
Anonymous


Random user 12/11/2023 1:34:00 AM

1z0-1078-23 need this dumps
Anonymous


labuschanka 11/16/2023 6:06:00 PM

i gave the microsoft azure az-500 tests and prepared from this site as it has latest mock tests available which helped me evaluate my performance and score 919/1000
Anonymous


Marianne 10/22/2023 11:57:00 PM

i cannot see the button to go to the questions
Anonymous


sushant 6/28/2023 4:52:00 AM

good questions
EUROPEAN UNION


A\MAM 6/27/2023 5:17:00 PM

q-6 ans-b correct. https://docs.paloaltonetworks.com/pan-os/9-1/pan-os-cli-quick-start/use-the-cli/commit-configuration-changes
UNITED STATES


unanimous 12/15/2023 6:38:00 AM

very nice very nice
Anonymous


akminocha 9/28/2023 10:36:00 AM

please help us with 1z0-1107-2 dumps
INDIA


Jefi 9/4/2023 8:15:00 AM

please upload the practice questions
Anonymous


Thembelani 5/30/2023 2:45:00 AM

need this dumps
Anonymous


Abduraimov 4/19/2023 12:43:00 AM

preparing for this exam is overwhelming. you cannot pass without the help of these exam dumps.
UNITED KINGDOM


Puneeth 10/5/2023 2:06:00 AM

new to this site but i feel it is good
EUROPEAN UNION


Ashok Kumar 1/2/2024 6:53:00 AM

the correct answer to q8 is b. explanation since the mule app has a dependency, it is necessary to include project modules and dependencies to make sure the app will run successfully on the runtime on any other machine. source code of the component that the mule app is dependent of does not need to be included in the exported jar file, because the source code is not being used while executing an app. compiled code is being used instead.
Anonymous


Merry 7/30/2023 6:57:00 AM

good questions
Anonymous


VoiceofMidnight 12/17/2023 4:07:00 PM

Delayed the exam until December 29th.
UNITED STATES


Umar Ali 8/29/2023 2:59:00 PM

A and D are True
Anonymous


vel 8/28/2023 9:17:09 AM

good one with explanation
Anonymous


Gurdeep 1/18/2024 4:00:15 PM

This is one of the most useful study guides I have ever used.
CANADA