Amazon
Anthropic
Avaya
Cisco
CompTIA
CrowdStrike
EC-Council
EXIN
Fortinet
Google
ISC
ISC2
ITIL
Juniper
Microsoft
NVIDIA
Palo Alto Networks
Salesforce
SAP
VMware
All Vendors

HP Aruba Certified Campus Access Professional HPE7-A01 Dumps in PDF

Free HP HPE7-A01 Real Questions (page: 6)

HPE7-A01 PDF — 161 Questions

When setting up an AOS-CX VSX pair, which information does the Inter-Switch Protocol synchronize in the configuration created?

  1. RPVST+
  2. SVI
  3. UDLD
  4. MSTP

Answer(s): D



What is enabled by LLDP-MED?

  1. Voice VLANs can be automatically configured for VoIP phones.
  2. GVRP VLAN information can be used to dynamically add VLANs to a trunk.
  3. iSCSI client devices can set the required MTU setting for the port.
  4. iSCSI client devices can request to have flow control enabled.

Answer(s): A

Explanation:

LLDP-MED (Link Layer Discovery Protocol – Media Endpoint Discovery) allows switches to automatically assign and configure the correct Voice VLAN to VoIP phones, enabling seamless voice network deployments.



Refer to the output from a CX6100 switch:

What is the correct detail that can be observed from the output above?

  1. The dBm values for Tx are too far away from 0, and the link is down.
  2. the dBm values for Rx are within acceptable values, and the link is up.
  3. The dBm values for Rx are too low, indicating that the link is down.
  4. The dBm values for Tx are too high and affect Rx signals.

Answer(s): C

Explanation:

The Rx Power is shown as -40.00 dBm (0.0001 mW), which is extremely low and far below operational thresholds. Additionally, alarms indicate "Rx Power low alarm," "Rx Power low warning," and "Rx loss of signal," confirming that the link is down due to insufficient received signal strength.



What is true regarding 802.11k?

  1. It extends radio measurements to define mechanisms for wireless network management of stations.
  2. It reduces roaming delay by pre-authenticating clients with multiple target APs before a client roams to an
    AP.
  3. It provides mechanisms for APs and clients to dynamically measure the available radio resources.
    -D. It considers several metrics before it determines if a client should be steered to the 5GHz band, including client RSSI.
    -

Answer(s): C



In a CX 8325, how do you configure the IP address 10.10.10.1 for the interface in default state for interface SVI 100 access and port 1/1/1?

  1. int vlan 100, ip address 10.10.10.1/24, int 1/1/1, switching, vlan access 100
  2. int vlan 100, ip address 10.10.10.1/24, int 1/1/1 vlan access 100
  3. int vlan 100, ip address 10.10.10.1/24, int 1/1/1, trunking, valn native 100
  4. int vlan, ip address 10.10.10.1/24, int 1/1/1, no routing, vlan access 100

Answer(s): B

Explanation:

To configure an SVI with IP address 10.10.10.1 on VLAN 100 and assign port 1/1/1 as an access port in VLAN 100 on the CX 8325, you configure the VLAN interface with the IP address and set the port as an access port for that VLAN. This enables both routing and switching for hosts connected to port 1/1/1 on VLAN 100.



Your customer currently has two (2) 5406 modular switches with MSTP configured as their core switches. You are proposing a new solution.
What would you explain regarding the AOS-CX VSX switch pair when the Spanning-tree needs to be set up?

  1. Enable vsx-peer stp-global in vsx mode to sync the configuration.
  2. Spanning-tree configuration is synced by default with VSX.
  3. Use vsx-sync in the MSTP region configuration to get synced.
  4. Enable vsx-sync stp-global in vsx mode to sync the configuration.

Answer(s): D

Explanation:

In AOS-CX VSX, to synchronize spanning-tree configuration (such as MSTP) between the VSX pair, you must enable vsx-sync stp-global in VSX mode. This ensures both switches have consistent spanning-tree settings, unlike classic modular switches where spanning-tree configuration is manually matched.



A customer has several hundred wireless IoT devices and is looking for an authentication solution that meets the following requirements:
-The wireless traffic between the IoT devices and the Access Point must be encrypted -Unique passphrase per device -Use fingerprint information to perform role-based access
Which solution will address the customer’s requirements? (Choose two.)

  1. MPSK and an internal RADIUS server
  2. MPSK Local with MAC Authentication
  3. Local User Derivation Rules
  4. HPE Aruba Networking ClearPass Policy Manager
  5. MPSK Local with EAP-TLS

Answer(s): A,D

Explanation:

MPSK (Multi Pre-Shared Key) provides unique passphrases per device, ensuring each IoT device has an individual key and encrypted wireless communication.
ClearPass Policy Manager enables advanced authentication (including fingerprinting), dynamic role-based access, and integrates with MPSK or RADIUS for per-device policies. Together, they meet all listed requirements: encryption, unique credentials, and fingerprint-based access control.



A large retail client is looking to generate a rich set of contextual data based on the location information of wireless clients in their stores.
Which standard uses Round Trip Time (RTT) and Fine Time Measurements (FTM) to calculate the distance a client is from an AP?

  1. 802.11mc
  2. 802.11be
  3. 802.11v
  4. 802.11ah

Answer(s): A

Explanation:

802.11mc introduces Fine Timing Measurement (FTM), which uses Round Trip Time (RTT) calculations between the client and the AP to accurately determine the client’s distance from the access point, enabling precise location-based services and contextual data collection.



PDF
Viewing page 6 of 22

Share your comments for HP HPE7-A01 exam with other users:

B
Bhuddhiman
7/30/2023 1:18:00 AM

good mateial

Anonymous
K
KJ
11/17/2023 3:50:00 PM

good practice exam

Anonymous
S
sowm
10/29/2023 2:44:00 PM

impressivre qustion

Anonymous
C
CW
7/6/2023 7:06:00 PM

questions seem helpful

Anonymous
L
luke
9/26/2023 10:52:00 AM

good content

Anonymous
Z
zazza
6/16/2023 9:08:00 AM

question 21 answer is alerts

ITALY
A
Abwoch Peter
7/4/2023 3:08:00 AM

am preparing for exam

Anonymous
M
mohamed
9/12/2023 5:26:00 AM

good one thanks

EGYPT
M
Mfc
10/23/2023 3:35:00 PM

only got thru 5 questions, need more to evaluate

Anonymous
W
Whizzle
7/24/2023 6:19:00 AM

q26 should be b

Anonymous
S
sarra
1/17/2024 3:44:00 AM

the aaa triad in information security is authentication, accounting and authorisation so the answer should be d 1, 3 and 5.

UNITED KINGDOM
D
DBS
5/14/2023 12:56:00 PM

need to attend this

UNITED STATES
D
Da_costa
8/1/2023 5:28:00 PM

these are free brain dumps i understand, how can one get free pdf

Anonymous
V
vikas
10/28/2023 6:57:00 AM

provide access

EUROPEAN UNION
A
Abdullah
9/29/2023 2:06:00 AM

good morning

Anonymous
R
Raj
6/26/2023 3:12:00 PM

please upload the ncp-mci 6.5 dumps, really need to practice this one. thanks guys

Anonymous
M
Miguel
10/5/2023 12:21:00 PM

question 16: https://help.salesforce.com/s/articleview?id=sf.care_console_overview.htm&type=5

SPAIN
H
Hiren Ladva
7/8/2023 10:34:00 PM

yes i m prepared exam

Anonymous
O
oliverjames
10/24/2023 5:37:00 AM

my experience was great with this site as i studied for the ms-900 from here and got 900/1000 on the test. my main focus was on the tutorials which were provided and practice questions. thanks!

GERMANY
B
Bhuddhiman
7/20/2023 11:52:00 AM

great course

UNITED STATES
A
Anuj
1/14/2024 4:07:00 PM

very good question

Anonymous
S
Saravana Kumar TS
12/8/2023 9:49:00 AM

question: 93 which statement is true regarding the result? sales contain 6 columns and values contain 7 columns so c is not right answer.

INDIA
L
Lue
3/30/2023 11:43:00 PM

highly recommend just passed my exam.

CANADA
D
DC
1/7/2024 10:17:00 AM

great practice! thanks

UNITED STATES
A
Anonymus
11/9/2023 5:41:00 AM

anyone who wrote this exam recently?

SOUTH AFRICA
K
Khalid Javid
11/17/2023 3:46:00 PM

kindly share the dump

Anonymous
N
Na
8/9/2023 8:39:00 AM

could you please upload cfe fraud prevention and deterrence questions? it will be very much helpful.

Anonymous
S
shime
10/23/2023 10:03:00 AM

this is really very very helpful for mcd level 1

ETHIOPIA
V
Vnu
6/3/2023 2:39:00 AM

very helpful!

Anonymous
S
Steve
8/17/2023 2:19:00 PM

question #18s answer should be a, not d. this should be corrected. it should be minvalidityperiod

CANADA
R
RITEISH
12/24/2023 4:33:00 AM

thanks for the exact solution

Anonymous
S
SB
10/15/2023 7:58:00 AM

need to refer the questions and have to give the exam

INDIA
M
Mike Derfalem
7/16/2023 7:59:00 PM

i need it right now if it was possible please

Anonymous
I
Isak
7/6/2023 3:21:00 AM

i need it very much please share it in the fastest time.

Anonymous
AI Tutor 👋 I’m here to help!