An IT specialist is trying to create a reliable profile for a new endpoint device using ClearPass. They want to ensure the profiling is as accurate as possible. What approach should they take?
Answer(s): A
Accuracy in profiling is cumulative. Relying solely on one method (like DHCP) can result in "Generic" profiles. By enabling multiple collectors—such as DHCP (for OS discovery), HTTP (for browser/version info), and SNMP (for system description/OID)—ClearPass can correlate data points to provide a 100% certain classification. The more "context" ClearPass receives, the more reliable the final enforcement decision becomes.
A company is transitioning to a cloud-first strategy and has noticed an increase in the number of loTdevices and remote users. Which strategies would best address their security concerns?
Answer(s): B
In a cloud-first environment, the "perimeter" has effectively disappeared. A Zero Trust model is the only effective defense because it assumes the network is already compromised. ClearPass enables this through continuous monitoring; if a device's status changes (e.g., an OnGuard health check fails or an EMM marks it as "non-compliant"), ClearPass uses "closed-loop" logic to immediately update the network's enforcement via RADIUS CoA, ensuring the threat is contained in real-time.
A network engineer is configuring a policy enforcement service on a wired network to minimize deployment effort. They choose a non-AAA enforcement method. What is the main benefit of this approach?
Non-AAA enforcement (often called Web-based authentication or MAC-based profiling without 802.1X) is chosen for ease of deployment. 802.1X is highly secure but requires a "Supplicant" (software) configuration on every client device. By using a non-AAA method, the engineer can secure the network using the device's MAC address and a redirect to a web portal, which works on any device with a browser without needing to touch the client's internal network settings.
In a network utilizing ClearPass and RADIUS CoA, a client initially connects without profile data and is assigned limited access. How does ClearPass ensure that the client eventually gains full access?
Comprehensive and Detailed Explanation From HPE Aruba Networking ClearPass portfolio:This is the standard "Profile and Bounce" workflow.The device connects; ClearPass doesn't know what it is, so it applies a "Restricted" profile (allowing only DHCP/DNS).The device sends a DHCP Request.The ClearPass Profiler intercepts this, identifies the device (e.g., "Apple iPhone").ClearPass sends a RADIUS CoA Disconnect-Request (terminates the session).The device immediately re-connects. This time, the service sees the "Apple iPhone" profile and applies the "Full Access" policy.
How does ClearPass Guest utilize the information sent by the client's browser to profile the device and update its database?
When a guest is redirected to the captive portal, their browser sends an HTTP Get request. Included in the headers of this request is the User-Agent string (e.g., Mozilla/5.0 (iPhone; CPU iPhone OS 17_0...)). ClearPass Guest parses this string to identify the specific OS and browser version. This information is then shared with the Policy Manager to update the endpoint database, providing immediate profiling context even before the user logs in.
A network engineer is tasked with creating enforcement profiles for a multi-vendor environment and wants to minimize the number of enforcement profiles they need to write. Which approach should the engineer take?
IETF Attributes (like Service-Type or Tunnel-Private-Group-ID) are standard RADIUS attributes that every vendor (Cisco, Aruba, Juniper) must support. Vendor-Specific Attributes (VSAs) are unique (e.g., an Aruba-User-Role won't work on a Cisco switch). By using IETF attributes for common tasks like VLAN assignment, an engineer can create a single Enforcement Profile that works across all hardware in the building, significantly reducing administrative overhead.
In a corporate network following Zero Trust best practices, a security team notices unusual activity from a previously authenticated and authorized device. What should the team do next?
Answer(s): C
Zero Trust operates on the principle of Continuous Risk Assessment. Initial authentication is not a "permanent pass." If a device's behavior changes (detected by a traffic monitor or firewall), ClearPass must be able to revoke or reduce its access. The correct response is to move the device to aQuarantine VLAN or apply a restrictive ACL via CoA. This "closed-loop" security prevents lateral movement while the security team investigates the anomaly.
A security analyst notices the system is set to gather device location information from network device attributes. Which attribute is likely being used?
ClearPass can extract location context from the NAD's RADIUS attributes. Common attributes used include NAS-Port-Id (for wired switches to show the specific port/closet) or Called-Station-Id (for wireless to show the AP Name or MAC). By configuring the Network Device attribute settings in ClearPass, these raw strings can be mapped to human-readable locations (e.g., "Building 5, 2nd Floor").
Share your comments for HP HPE6-A88 exam with other users:
thanks for the exact solution
need to refer the questions and have to give the exam
i need it right now if it was possible please
i need it very much please share it in the fastest time.
correct answer is d for student.java program
q:37 c is correct
q6 exam topic: terramearth, c: correct answer: copy 1petabyte to encrypted usb device ???
explained answers
plan to take theaws certified developer - associate dva-c02 in the next few weeks
very helpfull
good questions
help to practice csa exam
nice tip and well documented
i need the exam
please upload
prepping for fsc exam
pd1 with great experience
@t it seems like azure service bus message quesues could be the best solution
helpful to check your understanding.
question 128 the answer should be static not auto
more comments here
great support to appear for exams
useful dumps
making progress
q31 answer should be d i think
is this real?
q10: c and f are also true. q11: this is outdated. you no longer need ownership on a pipe to operate it
good questions with simple explanation
admin guide (windows) respond to malicious causality chains. when the cortex xdr agent identifies a remote network connection that attempts to perform malicious activity—such as encrypting endpoint files—the agent can automatically block the ip address to close all existing communication and block new connections from this ip address to the endpoint. when cortex xdrblocks an ip address per endpoint, that address remains blocked throughout all agent profiles and policies, including any host-firewall policy rules. you can view the list of all blocked ip addresses per endpoint from the action center, as well as unblock them to re-enable communication as appropriate. this module is supported with cortex xdr agent 7.3.0 and later. select the action mode to take when the cortex xdr agent detects remote malicious causality chains: enabled (default)—terminate connection and block ip address of the remote connection. disabled—do not block remote ip addresses. to allow specific and known s
very inciting
question 5, it seems a instead of d, because: - care plan = case - patient = person account - product = product2;
it look like real one
i am taking oracle fcc certification test next two days, pls share question dumps
i need dumps