Hitachi Vantara Qualified Professional - VSP Midrange Family Installation HQT-4180 Dumps in PDF

Free Hitachi HQT-4180 Real Questions (page: 4)

Which program is used to perform the “New Installation” procedure on a VSP F700 system?

  1. raidcom CLI
  2. Hitachi Ops Center Administrator
  3. SVP Web console
  4. MPC connected to the maintenance LAN port

Answer(s): D



You need to replace a broken disk drive on a VSP G700.
What are two prerequisites? (Choose two.)

  1. You must use the Replace button in the Maintenance Utility before removing the drive.
  2. You must wear a wrist strap for ESD protection.
  3. The red LED on the drive must be lit.
  4. The Drive Box where the drive is located must be powered down.

Answer(s): A,B



You need to replace a broken fan in a VSP E1090.
What is the correct procedure?

  1. Use the MPC for blocking the fan, then replace it.
  2. Use the Maintenance Utility for stopping the fan, then replace it.
  3. Remove the broken fan, then replace it.
  4. Use Storage Navigator for blocking the fan, then replace it.

Answer(s): B



You need to replace a failing power supply (PS) in a VSP E590.
What is the correct procedure?

  1. Check if the status of the PS is blocked, and if yes, then replace it directly.
  2. Use the Maintenance Utility for blocking the PS, then replace it.
  3. Use the Maintenance Utility for blocking the controller, then replace the PS.
  4. Use the MPC for blocking the PS, then replace it.

Answer(s): B



The SVP of a VSP G900 system failed and you have been asked to replace it.
Which two items must be available to perform the replacement? (Choose two.)

  1. the iso file with the correct version of Hitachi Ops Center
  2. the iso file with the correct version of the Windows operating system
  3. the microcode iso file with the correct software versions
  4. the Hitachi Remote Ops Monitor Agent iso file

Answer(s): B,C



Which tool monitors a VSP E590 system and reports System Information Messages (SIMs)?

  1. Hitachi Remote Ops Monitor Agent
  2. Hitachi Remote Ops SVP Agent
  3. Hitachi Ops Center Protector
  4. Storage Navigator

Answer(s): C



Which two statements are correct when adding cache to a VSP E590? (Choose two.)

  1. Cache modules must be installed in CMG1.
  2. Cache Modules must be installed on the CM board.
  3. CMG0 and CMG1 must have the same DIMM type.
  4. This is not supported online.

Answer(s): B,C



A customer wants to change a production RAID Group from RAID 5 (7D+1P) to RAID 6 (6D + 2P) on a VSP G700 during normal operations. They have just unmapped the LUNs from the channel ports.
What needs to be performed next?

  1. The RAID level must be changed in Storage Navigator.
  2. The RAID level must be changed in the SVP Maintenance window.
  3. The RAID 5 Group must be put into DRU mode in Storage Navigator.
  4. The RAID Group must be deleted.

Answer(s): D

Explanation:

Technical Justification for Correct Answer: D
Correct Answer: D - The RAID Group must be deleted
Why D is the best option: On a Hitachi VSP G700, changing the RAID level of an existing production RAID Group from RAID 5 to RAID 6 during normal operations, after unmapping the LUNs from the channel ports, requires the RAID Group to be deleted and then recreated with the desired new RAID configuration. This is because the storage system does not support direct, online modifications to the RAID level of an existing RAID Group. Deleting the RAID Group allows for the reconstruction of the group with the new RAID 6 (6D + 2P) configuration, ensuring data integrity and system stability.
Why Other Options are Less Suitable:

A: The RAID level must be changed in Storage Navigator: This option is incorrect because Storage Navigator, while a comprehensive management tool, does not support online RAID level changes for existing RAID Groups on a VSP G700. Such a capability would pose significant risks to data integrity without a structured process like deletion and recreation.
B: The RAID level must be changed in the SVP Maintenance window: Although the SVP (Storage Virtualization Platform) Maintenance window is used for various low-level operations, online RAID level changes for production RAID Groups are not supported through this interface either, making this option invalid for the described scenario.
C: The RAID 5 Group must be put into DRU (Direct Read Vulnerability) mode in Storage Navigator: Placing a RAID Group in DRU mode is related to handling failed disks or preparing for maintenance to prevent data loss, not for changing the RAID level. This mode does not facilitate RAID configuration changes and is unrelated to the customer's requirement.


Reference:

[1] Hitachi VSP G700 Installation Guide - For detailed procedures on RAID Group management and limitations on configuration changes. ( https://library.hitachi.com/hitachi/library Đồng
NOTE: The exact link may vary based on Hitachi's update policy and access restrictions. For authorized personnel, the document can be found through the Hitachi Vantara Documentation Portal.) [2] Hitachi Storage Navigator SE User Guide - For managing storage systems, including operations supported and not supported through the interface. (Similar notice as above; authenticated access might be required: https://support.hitachi-vantara.com/docs/display/DOCS/Storage+Navigator+SE+User+Guide )



Share your comments for Hitachi HQT-4180 exam with other users:

N
NanoTek3
6/13/2022 10:44:00 PM

by far this is the most accurate exam dumps i have ever purchased. all questions are in the exam. i saw almost 90% of the questions word by word.

E
eriy
11/9/2023 5:12:00 AM

i cleared the az-104 exam by scoring 930/1000 on the exam. it was all possible due to this platform as it provides premium quality service. thank you!

M
Muhammad Rawish Siddiqui
12/8/2023 8:12:00 PM

question # 232: accessibility, privacy, and innovation are not data quality dimensions.

V
Venkat
12/27/2023 9:04:00 AM

looks wrong answer for 443 question, please check and update

V
Varun
10/29/2023 9:11:00 PM

great question

D
Doc
10/29/2023 9:36:00 PM

question: a user wants to start a recruiting posting job posting. what must occur before the posting process can begin? 3 ans: comment- option e is incorrect reason: as part of enablement steps, sap recommends that to be able to post jobs to a job board, a user need to have the correct permission and secondly, be associated with one posting profile at minimum

I
It‘s not A
9/17/2023 5:31:00 PM

answer to question 72 is d [sys_user_role]

I
indira m
8/14/2023 12:15:00 PM

please provide the pdf

R
ribrahim
8/1/2023 6:05:00 AM

hey guys, just to let you all know that i cleared my 312-38 today within 1 hr with 100 questions and passed. thank you so much brain-dumps.net all the questions that ive studied in this dump came out exactly the same word for word "verbatim". you rock brain-dumps.net!!! section name total score gained score network perimeter protection 16 11 incident response 10 8 enterprise virtual, cloud, and wireless network protection 12 8 application and data protection 13 10 network défense management 10 9 endpoint protection 15 12 incident d

A
Andrew
8/23/2023 6:02:00 PM

very helpful

L
latha
9/7/2023 8:14:00 AM

useful questions

I
ibrahim
11/9/2023 7:57:00 AM

page :20 https://exam-dumps.com/snowflake/free-cof-c02-braindumps.html?p=20#collapse_453 q 74: true or false: pipes can be suspended and resumed. true. desc.: pausing or resuming pipes in addition to the pipe owner, a role that has the following minimum permissions can pause or resume the pipe https://docs.snowflake.com/en/user-guide/data-load-snowpipe-intro

F
Franklin Allagoa
7/5/2023 5:16:00 AM

i want hcia exam dumps

S
SSA
12/24/2023 1:18:00 PM

good training

B
BK
8/11/2023 12:23:00 PM

very useful

D
Deepika Narayanan
7/13/2023 11:05:00 PM

yes need this exam dumps

B
Blessious Phiri
8/15/2023 3:31:00 PM

these questions are a great eye opener

J
Jagdesh
9/8/2023 8:17:00 AM

thank you for providing these questions and answers. they helped me pass my exam. you guys are great.

T
TS
7/18/2023 3:32:00 PM

good knowledge

A
Asad Khan
11/1/2023 2:44:00 AM

answer 10 should be a because only a new project will be created & the organization is the same.

R
Raj
9/12/2023 3:49:00 PM

can you please upload the dump again

C
Christian Klein
6/23/2023 1:32:00 PM

is it legit questions from sap certifications ?

A
anonymous
1/12/2024 3:34:00 PM

question 16 should be b (changing the connector settings on the monitor) pc and monitor were powered on. the lights on the pc are on indicating power. the monitor is showing an error text indicating that it is receiving power too. this is a clear sign of having the wrong input selected on the monitor. thus, the "connector setting" needs to be switched from hdmi to display port on the monitor so it receives the signal from the pc, or the other way around (display port to hdmi).

N
NSPK
1/18/2024 10:26:00 AM

q 10. ans is d (in the target org: open deployment settings, click edit next to the source org. select allow inbound changes and save

M
mohamed abdo
9/1/2023 4:59:00 AM

very useful

T
Tom
3/18/2022 8:00:00 PM

i purchased this exam dumps from another website with way more questions but they were all invalid and outdate. this exam dumps was right to the point and all from recent exam. it was a hard pass.

E
Edrick GOP
10/24/2023 6:00:00 AM

it was a good experience and i got 90% in the 200-901 exam.

A
anonymous
8/10/2023 2:28:00 AM

hi please upload this

B
Bakir
7/6/2023 7:24:00 AM

please upload it

A
Aman
6/18/2023 1:27:00 PM

really need this dump. can you please help.

N
Neela Para
1/8/2024 6:39:00 PM

really good and covers many areas explaining the answer.

K
Karan Patel
8/15/2023 12:51:00 AM

yes, can you please upload the exam?

N
NISHAD
11/7/2023 11:28:00 AM

how many questions are there in these dumps?

P
Pankaj
7/3/2023 3:57:00 AM

hi team, please upload this , i need it.

AI Tutor 👋 I’m here to help!