Hitachi Vantara Qualified Professional - VSP Midrange Family Installation HQT-4180 Dumps in PDF

Free Hitachi HQT-4180 Real Questions (page: 15)

Which program is used to perform the “New Installation” procedure on a VSP F700 system?

  1. raidcom CLI
  2. Hitachi Ops Center Administrator
  3. SVP Web console
  4. MPC connected to the maintenance LAN port

Answer(s): D



You need to replace a broken disk drive on a VSP G700.
What are two prerequisites? (Choose two.)

  1. You must use the Replace button in the Maintenance Utility before removing the drive.
  2. You must wear a wrist strap for ESD protection.
  3. The red LED on the drive must be lit.
  4. The Drive Box where the drive is located must be powered down.

Answer(s): A,B



You need to replace a broken fan in a VSP E1090.
What is the correct procedure?

  1. Use the MPC for blocking the fan, then replace it.
  2. Use the Maintenance Utility for stopping the fan, then replace it.
  3. Remove the broken fan, then replace it.
  4. Use Storage Navigator for blocking the fan, then replace it.

Answer(s): B



You need to replace a failing power supply (PS) in a VSP E590.
What is the correct procedure?

  1. Check if the status of the PS is blocked, and if yes, then replace it directly.
  2. Use the Maintenance Utility for blocking the PS, then replace it.
  3. Use the Maintenance Utility for blocking the controller, then replace the PS.
  4. Use the MPC for blocking the PS, then replace it.

Answer(s): B



The SVP of a VSP G900 system failed and you have been asked to replace it.
Which two items must be available to perform the replacement? (Choose two.)

  1. the iso file with the correct version of Hitachi Ops Center
  2. the iso file with the correct version of the Windows operating system
  3. the microcode iso file with the correct software versions
  4. the Hitachi Remote Ops Monitor Agent iso file

Answer(s): B,C



Which tool monitors a VSP E590 system and reports System Information Messages (SIMs)?

  1. Hitachi Remote Ops Monitor Agent
  2. Hitachi Remote Ops SVP Agent
  3. Hitachi Ops Center Protector
  4. Storage Navigator

Answer(s): C



Which two statements are correct when adding cache to a VSP E590? (Choose two.)

  1. Cache modules must be installed in CMG1.
  2. Cache Modules must be installed on the CM board.
  3. CMG0 and CMG1 must have the same DIMM type.
  4. This is not supported online.

Answer(s): B,C



A customer wants to change a production RAID Group from RAID 5 (7D+1P) to RAID 6 (6D + 2P) on a VSP G700 during normal operations. They have just unmapped the LUNs from the channel ports.
What needs to be performed next?

  1. The RAID level must be changed in Storage Navigator.
  2. The RAID level must be changed in the SVP Maintenance window.
  3. The RAID 5 Group must be put into DRU mode in Storage Navigator.
  4. The RAID Group must be deleted.

Answer(s): D

Explanation:

Technical Justification for Correct Answer: D
Correct Answer: D - The RAID Group must be deleted
Why D is the best option: On a Hitachi VSP G700, changing the RAID level of an existing production RAID Group from RAID 5 to RAID 6 during normal operations, after unmapping the LUNs from the channel ports, requires the RAID Group to be deleted and then recreated with the desired new RAID configuration. This is because the storage system does not support direct, online modifications to the RAID level of an existing RAID Group. Deleting the RAID Group allows for the reconstruction of the group with the new RAID 6 (6D + 2P) configuration, ensuring data integrity and system stability.
Why Other Options are Less Suitable:

A: The RAID level must be changed in Storage Navigator: This option is incorrect because Storage Navigator, while a comprehensive management tool, does not support online RAID level changes for existing RAID Groups on a VSP G700. Such a capability would pose significant risks to data integrity without a structured process like deletion and recreation.
B: The RAID level must be changed in the SVP Maintenance window: Although the SVP (Storage Virtualization Platform) Maintenance window is used for various low-level operations, online RAID level changes for production RAID Groups are not supported through this interface either, making this option invalid for the described scenario.
C: The RAID 5 Group must be put into DRU (Direct Read Vulnerability) mode in Storage Navigator: Placing a RAID Group in DRU mode is related to handling failed disks or preparing for maintenance to prevent data loss, not for changing the RAID level. This mode does not facilitate RAID configuration changes and is unrelated to the customer's requirement.


Reference:

[1] Hitachi VSP G700 Installation Guide - For detailed procedures on RAID Group management and limitations on configuration changes. ( https://library.hitachi.com/hitachi/library Đồng
NOTE: The exact link may vary based on Hitachi's update policy and access restrictions. For authorized personnel, the document can be found through the Hitachi Vantara Documentation Portal.) [2] Hitachi Storage Navigator SE User Guide - For managing storage systems, including operations supported and not supported through the interface. (Similar notice as above; authenticated access might be required: https://support.hitachi-vantara.com/docs/display/DOCS/Storage+Navigator+SE+User+Guide )



Share your comments for Hitachi HQT-4180 exam with other users:

P
PeterPan
10/18/2023 10:22:00 AM

are the question real or fake?

C
CW
7/11/2023 3:19:00 PM

thank you for providing such assistance.

M
Mn8300
11/9/2023 8:53:00 AM

nice questions

N
Nico
4/23/2023 11:41:00 PM

my 3rd purcahse from this site. these exam dumps are helpful. very helpful.

C
Chere
9/15/2023 4:21:00 AM

found it good

T
Thembelani
5/30/2023 2:47:00 AM

excellent material

V
vinesh phale
9/11/2023 2:51:00 AM

very helpfull

B
Bhagiii
11/4/2023 7:04:00 AM

well explained.

R
Rahul
8/8/2023 9:40:00 PM

i need the pdf, please.

C
CW
7/11/2023 2:51:00 PM

a good source for exam preparation

A
Anchal
10/23/2023 4:01:00 PM

nice questions

J
J Nunes
9/29/2023 8:19:00 AM

i need ielts general training audio guide questions

A
Ananya
9/14/2023 5:16:00 AM

please make this content available

S
Swathi
6/4/2023 2:18:00 PM

content is good

L
Leo
7/29/2023 8:45:00 AM

latest dumps please

L
Laolu
2/15/2023 11:04:00 PM

aside from pdf the test engine software is helpful. the interface is user-friendly and intuitive, making it easy to navigate and find the questions.

Z
Zaynik
9/17/2023 5:36:00 AM

questions and options are correct, but the answers are wrong sometimes. so please check twice or refer some other platform for the right answer

M
Massam
6/11/2022 5:55:00 PM

90% of questions was there but i failed the exam, i marked the answers as per the guide but looks like they are not accurate , if not i would have passed the exam given that i saw about 45 of 50 questions from dump

A
Anonymous
12/27/2023 12:47:00 AM

answer to this question "what administrative safeguards should be implemented to protect the collected data while in use by manasa and her product management team? " it should be (c) for the following reasons: this administrative safeguard involves controlling access to collected data by ensuring that only individuals who need the data for their job responsibilities have access to it. this helps minimize the risk of unauthorized access and potential misuse of sensitive information. while other options such as (a) documenting data flows and (b) conducting a privacy impact assessment (pia) are important steps in data protection, implementing a "need to know" access policy directly addresses the issue of protecting data while in use by limiting access to those who require it for legitimate purposes. (d) is not directly related to safeguarding data during use; it focuses on data transfers and location.

J
Japles
5/23/2023 9:46:00 PM

password lockout being the correct answer for question 37 does not make sense. it should be geofencing.

F
Faritha
8/10/2023 6:00:00 PM

for question 4, the righr answer is :recover automatically from failures

A
Anonymous
9/14/2023 4:27:00 AM

question number 4s answer is 3, option c. i

P
p das
12/7/2023 11:41:00 PM

very good questions

A
Anna
1/5/2024 1:12:00 AM

i am confused about the answers to the questions. are the answers correct?

B
Bhavya
9/13/2023 10:15:00 AM

very usefull

R
Rahul Kumar
8/31/2023 12:30:00 PM

need certification.

D
Diran Ole
9/17/2023 5:15:00 PM

great exam prep

V
Venkata Subbarao Bandaru
6/24/2023 8:45:00 AM

i require dump

D
D
7/15/2023 1:38:00 AM

good morning, could you please upload this exam again,

A
Ann
9/15/2023 5:39:00 PM

hi can you please upload the dumps for sap contingent module. thanks

S
Sridhar
1/16/2024 9:19:00 PM

good questions

S
Summer
10/4/2023 9:57:00 PM

looking forward to the real exam

V
vv
12/2/2023 2:45:00 PM

good ones for exam preparation

D
Danny Zas
9/15/2023 4:45:00 AM

this is a good experience

AI Tutor 👋 I’m here to help!