Fortinet FCP - FortiGate 7.4 Administrator FCP_FGT_AD-7.4 Dumps in PDF

Free Fortinet FCP_FGT_AD-7.4 Real Questions (page: 8)

Refer to the exhibits.

The exhibits show the application sensor configuration and the Excessive-Bandwidth and Apple filter details.

Based on the configuration, what will happen to Apple FaceTime if there are only a few calls originating or incoming?

  1. Apple FaceTime will be allowed, based on the Video/Audio category configuration.
  2. Apple FaceTime will be allowed, based on the Apple filter configuration.
  3. Apple FaceTime will be allowed only if the Apple filter in Application and Filter Overrides is set to Allow.
  4. Apple FaceTime will be blocked, based on the Excessive-Bandwidth filter configuration.

Answer(s): D

Explanation:

Based on the application sensor configuration and the filter details:
D . Apple FaceTime will be blocked, based on the Excessive-Bandwidth filter configuration: The "Excessive-Bandwidth" filter is set to block, which includes "FaceTime" under its application signature. As a result, FaceTime will be blocked regardless of the "Apple" filter configuration because the "Excessive-Bandwidth" filter takes precedence due to its block action setting.
The other options are not correct:
A . Apple FaceTime will be allowed, based on the Video/Audio category configuration: The Video/Audio category is not relevant because FaceTime is specifically included in the Excessive- Bandwidth filter, which blocks it.
B . Apple FaceTime will be allowed, based on the Apple filter configuration: Although the Apple filter is set to monitor, the block action of the Excessive-Bandwidth filter will override this. C . Apple FaceTime will be allowed only if the Apple filter in Application and Filter Overrides is set to Allow: The allow setting for the Apple filter is irrelevant in this context, as the block action in the Excessive-Bandwidth filter will prevail.


Reference:

FortiOS 7.4.1 Administration Guide - Application Control and Filtering, page 978. FortiOS 7.4.1 Administration Guide - Application Sensor Configuration, page 982.



An employee needs to connect to the office through a high-latency internet connection.
Which SSL VPN setting should the administrator adjust to prevent SSL VPN negotiation failure?

  1. SSL VPN idle-timeout
  2. SSL VPN login-timeout
  3. SSL VPN dtls-hello-timeout
  4. SSL VPN session-ttl

Answer(s): C

Explanation:

For a high-latency internet connection, the SSL VPN setting that should be adjusted is:
C . SSL VPN dtls-hello-timeout: This setting determines how long the FortiGate will wait for a DTLS hello message from the client. For high-latency connections, increasing this timeout will prevent SSL VPN negotiation failures caused by delays in receiving the DTLS hello message.
The other options are not suitable:
A . SSL VPN idle-timeout: This setting controls the idle time allowed before a session is terminated, which is not relevant to the initial connection establishment. B . SSL VPN login-timeout: This setting controls the maximum time allowed for a user to log in, but does not affect connection negotiation.
D . SSL VPN session-ttl: This setting controls the total time-to-live for an SSL VPN session but does not directly address issues caused by high latency.


Reference:

FortiOS 7.4.1 Administration Guide - SSL VPN Configuration, page 1415.



When FortiGate performs SSL/SSH full inspection, you can decide how it should react when it detects an invalid certificate.
Which three actions are valid actions that FortiGate can perform when it detects an invalid certificate? (Choose three.)

  1. Allow & Warning
  2. Trust & Allow
  3. Allow
  4. Block & Warning
  5. Block

Answer(s): A,D,E

Explanation:

When FortiGate performs SSL/SSH full inspection and detects an invalid certificate, there are three valid actions it can take:
Allow & Warning: This action allows the session but generates a warning. Block & Warning: This action blocks the session and generates a warning. Block: This action blocks the session without generating a warning. Actions such as "Trust & Allow" or just "Allow" without additional configurations are not applicable in the context of handling invalid certificates.


Reference:

FortiOS 7.4.1 Administration Guide: Configuring SSL/SSH inspection profile



Refer to the exhibit, which shows the IPS sensor configuration.



If traffic matches this IPS sensor, which two actions is the sensor expected to take? (Choose two.)

  1. The sensor will gather a packet log for all matched traffic.
  2. The sensor will reset all connections that match these signatures.
  3. The sensor will allow attackers matching the Microsoft.Windows.iSCSl.Target.DoS signature.
  4. The sensor will block all attacks aimed at Windows servers.

Answer(s): A,C

Explanation:

The IPS sensor configuration shows that:
The Microsoft.Windows.iSCSI.Target.DoS signature is set to "Monitor" with packet logging enabled, meaning that while traffic matching this signature will be allowed, it will also be logged for further analysis.
The generic Windows filter is set to "Block," meaning that all other attacks matching this filter will be blocked. However, the sensor will not reset connections or log packets unless specified. Therefore, the sensor will allow attackers matching the specific DoS signature while blocking other attacks against Windows.


Reference:

FortiOS 7.4.1 Administration Guide: IPS Configuration



Which statement is a characteristic of automation stitches?

  1. They can be run only on devices in the Security Fabric.
  2. They can be created only on downstream devices in the fabric.
  3. They can have one or more triggers.
  4. They can run multiple actions at the same time.

Answer(s): C

Explanation:

Automation stitches on FortiGate can have one or more triggers, which are conditions or events that activate the automation stitch. The trigger defines when the automation stitch should execute the defined actions. Actions within a stitch can be executed sequentially or in parallel, depending on the configuration.


Reference:

FortiOS 7.4.1 Administration Guide: Automation Stitches



Share your comments for Fortinet FCP_FGT_AD-7.4 exam with other users:

N
Nizam
6/16/2023 7:29:00 AM

I have to say this is really close to real exam. Passed my exam with this.

P
poran
11/20/2023 4:43:00 AM

good analytics question

A
Antony
11/23/2023 11:36:00 AM

this looks accurate

E
Ethan
8/23/2023 12:52:00 AM

question 46, the answer should be data "virtualization" (not visualization).

N
nSiva
9/22/2023 5:58:00 AM

its useful.

R
Ranveer
7/26/2023 7:26:00 PM

Pass this exam 3 days ago. The PDF version and the Xengine App is quite useful.

S
Sanjay
8/15/2023 10:22:00 AM

informative for me.

T
Tom
12/12/2023 8:53:00 PM

question 134s answer shoule be "dlp"

A
Alex
11/7/2023 11:02:00 AM

in 72 the answer must be [sys_user_has_role] table.

F
Finn
5/4/2023 10:21:00 PM

i appreciated the mix of multiple-choice and short answer questions. i passed my exam this morning.

A
AJ
7/13/2023 8:33:00 AM

great to find this website, thanks

C
Curtis Nakawaki
6/29/2023 9:11:00 PM

examination questions seem to be relevant.

U
Umashankar Sharma
10/22/2023 9:39:00 AM

planning to take psm test

E
ED SHAW
7/31/2023 10:34:00 AM

please allow to download

A
AD
7/22/2023 11:29:00 AM

please provide dumps

A
Ayyjayy
11/6/2023 7:29:00 AM

is the answer to question 15 correct ? i feel like the answer should be b

B
Blessious Phiri
8/12/2023 11:56:00 AM

its getting more technical

J
Jeanine J
7/11/2023 3:04:00 PM

i think these questions are what i need.

A
Aderonke
10/23/2023 2:13:00 PM

helpful assessment

T
Tom
1/5/2024 2:32:00 AM

i am confused about the answers to the questions. do you know if the answers are correct?

V
Vinit N.
8/28/2023 2:33:00 AM

hi, please make the dumps available for my upcoming examination.

S
Sanyog Deshpande
9/14/2023 7:05:00 AM

good practice

T
Tyron
9/8/2023 12:12:00 AM

so far it is really informative

B
beast
7/30/2023 2:22:00 PM

hi i want it please please upload it

M
Mirex
5/26/2023 3:45:00 AM

am preparing for exam ,just nice questions

E
exampei
8/7/2023 8:05:00 AM

please upload c_tadm_23 exam

A
Anonymous
9/12/2023 12:50:00 PM

can we get tdvan4 vantage data engineering pdf?

A
Aish
10/11/2023 5:51:00 AM

want to clear the exam.

S
Smaranika
6/22/2023 8:42:00 AM

could you please upload the dumps of sap c_sac_2302

B
Blessious Phiri
8/15/2023 1:56:00 PM

asm management configuration is about storage

L
Lewis
7/6/2023 8:49:00 PM

kool thumb up

M
Moreece
5/15/2023 8:44:00 AM

just passed the az-500 exam this last friday. most of the questions in this exam dumps are in the exam. i bought the full version and noticed some of the questions which were answered wrong in the free version are all corrected in the full version. this site is good but i wish the had it in an interactive version like a test engine simulator.

T
Terry
5/24/2023 4:41:00 PM

i can practice for exam

E
Emerys
7/29/2023 6:55:00 AM

please i need this exam.

AI Tutor 👋 I’m here to help!