Fortinet FCP - FortiGate 7.4 Administrator FCP_FGT_AD-7.4 Dumps in PDF

Free Fortinet FCP_FGT_AD-7.4 Real Questions (page: 9)

Refer to the exhibits.

The exhibits show the application sensor configuration and the Excessive-Bandwidth and Apple filter details.

Based on the configuration, what will happen to Apple FaceTime if there are only a few calls originating or incoming?

  1. Apple FaceTime will be allowed, based on the Video/Audio category configuration.
  2. Apple FaceTime will be allowed, based on the Apple filter configuration.
  3. Apple FaceTime will be allowed only if the Apple filter in Application and Filter Overrides is set to Allow.
  4. Apple FaceTime will be blocked, based on the Excessive-Bandwidth filter configuration.

Answer(s): D

Explanation:

Based on the application sensor configuration and the filter details:
D . Apple FaceTime will be blocked, based on the Excessive-Bandwidth filter configuration: The "Excessive-Bandwidth" filter is set to block, which includes "FaceTime" under its application signature. As a result, FaceTime will be blocked regardless of the "Apple" filter configuration because the "Excessive-Bandwidth" filter takes precedence due to its block action setting.
The other options are not correct:
A . Apple FaceTime will be allowed, based on the Video/Audio category configuration: The Video/Audio category is not relevant because FaceTime is specifically included in the Excessive- Bandwidth filter, which blocks it.
B . Apple FaceTime will be allowed, based on the Apple filter configuration: Although the Apple filter is set to monitor, the block action of the Excessive-Bandwidth filter will override this. C . Apple FaceTime will be allowed only if the Apple filter in Application and Filter Overrides is set to Allow: The allow setting for the Apple filter is irrelevant in this context, as the block action in the Excessive-Bandwidth filter will prevail.


Reference:

FortiOS 7.4.1 Administration Guide - Application Control and Filtering, page 978. FortiOS 7.4.1 Administration Guide - Application Sensor Configuration, page 982.



An employee needs to connect to the office through a high-latency internet connection.
Which SSL VPN setting should the administrator adjust to prevent SSL VPN negotiation failure?

  1. SSL VPN idle-timeout
  2. SSL VPN login-timeout
  3. SSL VPN dtls-hello-timeout
  4. SSL VPN session-ttl

Answer(s): C

Explanation:

For a high-latency internet connection, the SSL VPN setting that should be adjusted is:
C . SSL VPN dtls-hello-timeout: This setting determines how long the FortiGate will wait for a DTLS hello message from the client. For high-latency connections, increasing this timeout will prevent SSL VPN negotiation failures caused by delays in receiving the DTLS hello message.
The other options are not suitable:
A . SSL VPN idle-timeout: This setting controls the idle time allowed before a session is terminated, which is not relevant to the initial connection establishment. B . SSL VPN login-timeout: This setting controls the maximum time allowed for a user to log in, but does not affect connection negotiation.
D . SSL VPN session-ttl: This setting controls the total time-to-live for an SSL VPN session but does not directly address issues caused by high latency.


Reference:

FortiOS 7.4.1 Administration Guide - SSL VPN Configuration, page 1415.



When FortiGate performs SSL/SSH full inspection, you can decide how it should react when it detects an invalid certificate.
Which three actions are valid actions that FortiGate can perform when it detects an invalid certificate? (Choose three.)

  1. Allow & Warning
  2. Trust & Allow
  3. Allow
  4. Block & Warning
  5. Block

Answer(s): A,D,E

Explanation:

When FortiGate performs SSL/SSH full inspection and detects an invalid certificate, there are three valid actions it can take:
Allow & Warning: This action allows the session but generates a warning. Block & Warning: This action blocks the session and generates a warning. Block: This action blocks the session without generating a warning. Actions such as "Trust & Allow" or just "Allow" without additional configurations are not applicable in the context of handling invalid certificates.


Reference:

FortiOS 7.4.1 Administration Guide: Configuring SSL/SSH inspection profile



Refer to the exhibit, which shows the IPS sensor configuration.



If traffic matches this IPS sensor, which two actions is the sensor expected to take? (Choose two.)

  1. The sensor will gather a packet log for all matched traffic.
  2. The sensor will reset all connections that match these signatures.
  3. The sensor will allow attackers matching the Microsoft.Windows.iSCSl.Target.DoS signature.
  4. The sensor will block all attacks aimed at Windows servers.

Answer(s): A,C

Explanation:

The IPS sensor configuration shows that:
The Microsoft.Windows.iSCSI.Target.DoS signature is set to "Monitor" with packet logging enabled, meaning that while traffic matching this signature will be allowed, it will also be logged for further analysis.
The generic Windows filter is set to "Block," meaning that all other attacks matching this filter will be blocked. However, the sensor will not reset connections or log packets unless specified. Therefore, the sensor will allow attackers matching the specific DoS signature while blocking other attacks against Windows.


Reference:

FortiOS 7.4.1 Administration Guide: IPS Configuration



Which statement is a characteristic of automation stitches?

  1. They can be run only on devices in the Security Fabric.
  2. They can be created only on downstream devices in the fabric.
  3. They can have one or more triggers.
  4. They can run multiple actions at the same time.

Answer(s): C

Explanation:

Automation stitches on FortiGate can have one or more triggers, which are conditions or events that activate the automation stitch. The trigger defines when the automation stitch should execute the defined actions. Actions within a stitch can be executed sequentially or in parallel, depending on the configuration.


Reference:

FortiOS 7.4.1 Administration Guide: Automation Stitches



Share your comments for Fortinet FCP_FGT_AD-7.4 exam with other users:

C
Christopher
9/5/2022 10:54:00 PM

the new versoin of this exam which i downloaded has all the latest questions from the exam. i only saw 3 new questions in the exam which was not in this dump.

S
Sam
9/7/2023 6:51:00 AM

question 8 - can cloudtrail be used for storing jobs? based on aws - aws cloudtrail is used for governance, compliance and investigating api usage across all of our aws accounts. every action that is taken by a user or script is an api call so this is logged to [aws] cloudtrail. something seems incorrect here.

T
Tanvi Rajput
8/14/2023 10:55:00 AM

question 13 tda - c01 answer : quick table calculation -> percentage of total , compute using table down

P
PMSAGAR
9/19/2023 2:48:00 AM

pls share teh dump

Z
zazza
6/16/2023 10:47:00 AM

question 44 answer is user risk

P
Prasana
6/23/2023 1:59:00 AM

please post the questions for preparation

T
test user
9/24/2023 3:15:00 AM

thanks for the questions

D
Draco
7/19/2023 5:34:00 AM

please reopen it now ..its really urgent

M
Megan
4/14/2023 5:08:00 PM

these practice exam questions were exactly what i needed. the variety of questions and the realistic exam-like environment they created helped me assess my strengths and weaknesses. i felt more confident and well-prepared on exam day, and i owe it to this exam dumps!

A
abdo casa
8/9/2023 6:10:00 PM

thank u it very instructuf

D
Danny
1/15/2024 9:10:00 AM

its helpful?

H
hanaa
10/3/2023 6:57:00 PM

is this dump still valid???

G
Georgio
1/19/2024 8:15:00 AM

question 205 answer is b

M
Matthew Dievendorf
5/30/2023 9:37:00 PM

question 39, should be answer b, directions stated is being sudneted from /21 to a /23. a /23 has 512 ips so 510 hosts. and can make 4 subnets out of the /21

A
Adhithya
8/11/2022 12:27:00 AM

beautiful test engine software and very helpful. questions are same as in the real exam. i passed my paper.

S
SuckerPumch88
4/25/2022 10:24:00 AM

the questions are exactly the same in real exam. just make sure not to answer all them correct or else they suspect you are cheating.

S
soheib
7/24/2023 7:05:00 PM

question: 78 the right answer i think is d not a

S
srija
8/14/2023 8:53:00 AM

very helpful

T
Thembelani
5/30/2023 2:17:00 AM

i am writing this exam tomorrow and have dumps

A
Anita
10/1/2023 4:11:00 PM

can i have the icdl excel exam

B
Ben
9/9/2023 7:35:00 AM

please upload it

A
anonymous
9/20/2023 11:27:00 PM

hye when will post again the past year question for this h13-311_v3 part since i have to for my test tommorow…thank you very much

R
Randall
9/28/2023 8:25:00 PM

on question 22, option b-once per session is also valid.

T
Tshegofatso
8/28/2023 11:51:00 AM

this website is very helpful

P
philly
9/18/2023 2:40:00 PM

its my first time exam

B
Beexam
9/4/2023 9:06:00 PM

correct answers are device configuration-enable the automatic installation of webview2 runtime. & policy management- prevent users from submitting feedback.

R
RAWI
7/9/2023 4:54:00 AM

is this dump still valid? today is 9-july-2023

A
Annie
6/7/2023 3:46:00 AM

i need this exam.. please upload these are really helpful

S
Shubhra Rathi
8/26/2023 1:08:00 PM

please upload the oracle 1z0-1059-22 dumps

S
Shiji
10/15/2023 1:34:00 PM

very good questions

R
Rita Rony
11/27/2023 1:36:00 PM

nice, first step to exams

A
Aloke Paul
9/11/2023 6:53:00 AM

is this valid for chfiv9 as well... as i am reker 3rd time...

C
Calbert Francis
1/15/2024 8:19:00 PM

great exam for people taking 220-1101

A
Ayushi Baria
11/7/2023 7:44:00 AM

this is very helpfull for me

AI Tutor 👋 I’m here to help!