EXIN Information Security Foundation based on ISO/IEC 27002 EX0-105 Dumps in PDF

Free EXIN EX0-105 Real Questions (page: 7)

You work for a large organization. You notice that you have access to confidential information that you should not be able to access in your position. You report this security incident to the helpdesk. The incident cycle isinitiated.
What are the stages of the security incident cycle?

  1. Threat, Damage, Incident, Recovery
  2. Threat, Damage, Recovery, Incident
  3. Threat, Incident, Damage, Recovery
  4. Threat, Recovery, Incident, Damage

Answer(s): C



Your organization has an office with space for 25 workstations. These workstations are all fully equipped and in use. Due to a reorganization 10 extra workstations are added, 5 of which are used for a call centre 24 hours per day. Five workstations must always be available.
What physical security measures must be taken in order to ensure this?

  1. Obtain an extra office and set up 10 workstations. You would therefore have spare equipment that can be used to replace any non-functioning equipment.
  2. Obtain an extra office and set up 10 workstations. Ensure that there are security personnel both in the evenings and at night, so that staff can work there safely and securely.
  3. Obtain an extra office and connect all 10 new workstations to an emergency power supply and UPS (Uninterruptible Power Supply). Adjust the access control system to the working hours of the new staff. Inform the building security personnel that work will also be carried out in the evenings and at night.
  4. Obtain an extra office and provide a UPS (Uninterruptible Power Supply) for the five most important workstations.

Answer(s): C



Which of the following measures is a preventive measure?

  1. Installing a logging system that enables changes in a system to be recognized
  2. Shutting down all internet traffic after a hacker has gained access to the company systems
  3. Putting sensitive information in a safe
  4. Classifying a risk as acceptable because the cost of addressing the threat is higher than the value of the information at risk

Answer(s): C



What is a risk analysis used for?

  1. A risk analysis is used to express the value of information for an organization in monetary terms.
  2. A risk analysis is used to clarify to management their responsibilities.
  3. A risk analysis is used in conjunction with security measures to reduce risks to an acceptable level.
  4. A risk analysis is used to ensure that security measures are deployed in a cost-effective and timely fashion.

Answer(s): D



A well executed risk analysis provides a great deal of useful information. A risk analysis has four main objectives.
What is not one of the four main objectives of a risk analysis?

  1. Identifying assets and their value
  2. Determining the costs of threats
  3. Establishing a balance between the costs of an incident and the costs of a security measure
  4. Determining relevant vulnerabilities and threats

Answer(s): B



What is an example of a security incident?

  1. The lighting in the department no longer works.
  2. A member of staff loses a laptop.
  3. You cannot set the correct fonts in your word processing software.
  4. A file is saved under an incorrect name.

Answer(s): B



Which of the following measures is a corrective measure?

  1. Incorporating an Intrusion Detection System (IDS) in the design of a computer centre
  2. Installing a virus scanner in an information system
  3. Making a backup of the data that has been created or altered that day
  4. Restoring a backup of the correct database after a corrupt copy of the database was written over the original

Answer(s): D



We can acquire and supply information in various ways. The value of the information depends on whether it is reliable.
What are the reliability aspects of information?

  1. Availability, Information Value and Confidentiality
  2. Availability, Integrity and Confidentiality
  3. Availability, Integrity and Completeness
  4. Timeliness, Accuracy and Completeness

Answer(s): B



Share your comments for EXIN EX0-105 exam with other users:

P
Prem Yadav
7/29/2023 6:20:00 AM

pleaseee upload

A
Ahmed Hashi
7/6/2023 5:40:00 PM

thanks ly so i have information cia

M
mansi
5/31/2023 7:58:00 AM

hello team, i need sap qm dumps for practice

J
Jamil aljamil
12/4/2023 4:47:00 AM

it’s good but not senatios based

C
Cath
10/10/2023 10:19:00 AM

q.119 - the correct answer is b - they are not captured in an update set as theyre data.

P
P
1/6/2024 11:22:00 AM

good matter

S
surya
7/30/2023 2:02:00 PM

please upload c_sacp_2308

S
Sasuke
7/11/2023 10:30:00 PM

please upload the dump. thanks very much !!

V
V
7/4/2023 8:57:00 AM

good questions

T
TTB
8/22/2023 5:30:00 AM

hi, could you please update the latest dump version

T
T
7/28/2023 9:06:00 PM

this question is keep repeat : you are developing a sales application that will contain several azure cloud services and handle different components of a transaction. different cloud services will process customer orders, billing, payment, inventory, and shipping. you need to recommend a solution to enable the cloud services to asynchronously communicate transaction information by using xml messages. what should you include in the recommendation?

G
Gurgaon
9/28/2023 4:35:00 AM

great questions

W
wasif
10/11/2023 2:22:00 AM

its realy good

S
Shubhra Rathi
8/26/2023 1:12:00 PM

oracle 1z0-1059-22 dumps

L
Leo
7/29/2023 8:48:00 AM

please share me the pdf..

A
AbedRabbou Alaqabna
12/18/2023 3:10:00 AM

q50: which two functions can be used by an end user when pivoting an interactive report? the correct answer is a, c because we do not have rank in the function pivoting you can check in the apex app

R
Rohan Limaye
12/30/2023 8:52:00 AM

best to practice

A
Aparajeeta
10/13/2023 2:42:00 PM

so far it is good

V
Vgf
7/20/2023 3:59:00 PM

please provide me the dump

D
Deno
10/25/2023 1:14:00 AM

i failed the cisa exam today. but i have found all the questions that were on the exam to be on this site.

C
CiscoStudent
11/15/2023 5:29:00 AM

in question 272 the right answer states that an autonomous acces point is "configured and managed by the wlc" but this is not what i have learned in my ccna course. is this a mistake? i understand that lightweight aps are managed by wlc while autonomous work as standalones on the wlan.

P
pankaj
9/28/2023 4:36:00 AM

it was helpful

U
User123
10/8/2023 9:59:00 AM

good question

V
vinay
9/4/2023 10:23:00 AM

really nice

U
Usman
8/28/2023 10:07:00 AM

please i need dumps for isc2 cybersecuity

Q
Q44
7/30/2023 11:50:00 AM

ans is coldline i think

A
Anuj
12/21/2023 1:30:00 PM

very helpful

G
Giri
9/13/2023 10:31:00 PM

can you please provide dumps so that it helps me more

A
Aaron
2/8/2023 12:10:00 AM

thank you for providing me with the updated question and answers. this version has all the questions from the exam. i just saw them in my exam this morning. i passed my exam today.

S
Sarwar
12/21/2023 4:54:00 PM

how i can see exam questions?

C
Chengchaone
9/11/2023 10:22:00 AM

can you please upload please?

M
Mouli
9/2/2023 7:02:00 AM

question 75: option c is correct answer

J
JugHead
9/27/2023 2:40:00 PM

please add this exam

S
sushant
6/28/2023 4:38:00 AM

please upoad

AI Tutor 👋 I’m here to help!