EXIN Information Security Foundation based on ISO/IEC 27002 EX0-105 Dumps in PDF

Free EXIN EX0-105 Real Questions (page: 10)

You work for a large organization. You notice that you have access to confidential information that you should not be able to access in your position. You report this security incident to the helpdesk. The incident cycle isinitiated.
What are the stages of the security incident cycle?

  1. Threat, Damage, Incident, Recovery
  2. Threat, Damage, Recovery, Incident
  3. Threat, Incident, Damage, Recovery
  4. Threat, Recovery, Incident, Damage

Answer(s): C



Your organization has an office with space for 25 workstations. These workstations are all fully equipped and in use. Due to a reorganization 10 extra workstations are added, 5 of which are used for a call centre 24 hours per day. Five workstations must always be available.
What physical security measures must be taken in order to ensure this?

  1. Obtain an extra office and set up 10 workstations. You would therefore have spare equipment that can be used to replace any non-functioning equipment.
  2. Obtain an extra office and set up 10 workstations. Ensure that there are security personnel both in the evenings and at night, so that staff can work there safely and securely.
  3. Obtain an extra office and connect all 10 new workstations to an emergency power supply and UPS (Uninterruptible Power Supply). Adjust the access control system to the working hours of the new staff. Inform the building security personnel that work will also be carried out in the evenings and at night.
  4. Obtain an extra office and provide a UPS (Uninterruptible Power Supply) for the five most important workstations.

Answer(s): C



Which of the following measures is a preventive measure?

  1. Installing a logging system that enables changes in a system to be recognized
  2. Shutting down all internet traffic after a hacker has gained access to the company systems
  3. Putting sensitive information in a safe
  4. Classifying a risk as acceptable because the cost of addressing the threat is higher than the value of the information at risk

Answer(s): C



What is a risk analysis used for?

  1. A risk analysis is used to express the value of information for an organization in monetary terms.
  2. A risk analysis is used to clarify to management their responsibilities.
  3. A risk analysis is used in conjunction with security measures to reduce risks to an acceptable level.
  4. A risk analysis is used to ensure that security measures are deployed in a cost-effective and timely fashion.

Answer(s): D



A well executed risk analysis provides a great deal of useful information. A risk analysis has four main objectives.
What is not one of the four main objectives of a risk analysis?

  1. Identifying assets and their value
  2. Determining the costs of threats
  3. Establishing a balance between the costs of an incident and the costs of a security measure
  4. Determining relevant vulnerabilities and threats

Answer(s): B



What is an example of a security incident?

  1. The lighting in the department no longer works.
  2. A member of staff loses a laptop.
  3. You cannot set the correct fonts in your word processing software.
  4. A file is saved under an incorrect name.

Answer(s): B



Which of the following measures is a corrective measure?

  1. Incorporating an Intrusion Detection System (IDS) in the design of a computer centre
  2. Installing a virus scanner in an information system
  3. Making a backup of the data that has been created or altered that day
  4. Restoring a backup of the correct database after a corrupt copy of the database was written over the original

Answer(s): D



We can acquire and supply information in various ways. The value of the information depends on whether it is reliable.
What are the reliability aspects of information?

  1. Availability, Information Value and Confidentiality
  2. Availability, Integrity and Confidentiality
  3. Availability, Integrity and Completeness
  4. Timeliness, Accuracy and Completeness

Answer(s): B



Share your comments for EXIN EX0-105 exam with other users:

P
Praveen P
11/8/2023 5:18:00 AM

good content

A
Anastasiia
12/28/2023 9:06:00 AM

totally not correct answers. 21. you have one gcp account running in your default region and zone and another account running in a non-default region and zone. you want to start a new compute engine instance in these two google cloud platform accounts using the command line interface. what should you do? correct: create two configurations using gcloud config configurations create [name]. run gcloud config configurations activate [name] to switch between accounts when running the commands to start the compute engine instances.

P
Priyanka
7/24/2023 2:26:00 AM

kindly upload the dumps

N
Nabeel
7/25/2023 4:11:00 PM

still learning

G
gure
7/26/2023 5:10:00 PM

excellent way to learn

C
ciken
8/24/2023 2:55:00 PM

help so much

B
Biswa
11/20/2023 9:28:00 AM

understand sql col.

S
Saint Pierre
10/24/2023 6:21:00 AM

i would give 5 stars to this website as i studied for az-800 exam from here. it has all the relevant material available for preparation. i got 890/1000 on the test.

R
Rose
7/24/2023 2:16:00 PM

this is nice.

A
anon
10/15/2023 12:21:00 PM

q55- the ridac workflow can be modified using flow designer, correct answer is d not a

N
NanoTek3
6/13/2022 10:44:00 PM

by far this is the most accurate exam dumps i have ever purchased. all questions are in the exam. i saw almost 90% of the questions word by word.

E
eriy
11/9/2023 5:12:00 AM

i cleared the az-104 exam by scoring 930/1000 on the exam. it was all possible due to this platform as it provides premium quality service. thank you!

M
Muhammad Rawish Siddiqui
12/8/2023 8:12:00 PM

question # 232: accessibility, privacy, and innovation are not data quality dimensions.

V
Venkat
12/27/2023 9:04:00 AM

looks wrong answer for 443 question, please check and update

V
Varun
10/29/2023 9:11:00 PM

great question

D
Doc
10/29/2023 9:36:00 PM

question: a user wants to start a recruiting posting job posting. what must occur before the posting process can begin? 3 ans: comment- option e is incorrect reason: as part of enablement steps, sap recommends that to be able to post jobs to a job board, a user need to have the correct permission and secondly, be associated with one posting profile at minimum

I
It‘s not A
9/17/2023 5:31:00 PM

answer to question 72 is d [sys_user_role]

I
indira m
8/14/2023 12:15:00 PM

please provide the pdf

R
ribrahim
8/1/2023 6:05:00 AM

hey guys, just to let you all know that i cleared my 312-38 today within 1 hr with 100 questions and passed. thank you so much brain-dumps.net all the questions that ive studied in this dump came out exactly the same word for word "verbatim". you rock brain-dumps.net!!! section name total score gained score network perimeter protection 16 11 incident response 10 8 enterprise virtual, cloud, and wireless network protection 12 8 application and data protection 13 10 network défense management 10 9 endpoint protection 15 12 incident d

A
Andrew
8/23/2023 6:02:00 PM

very helpful

L
latha
9/7/2023 8:14:00 AM

useful questions

I
ibrahim
11/9/2023 7:57:00 AM

page :20 https://exam-dumps.com/snowflake/free-cof-c02-braindumps.html?p=20#collapse_453 q 74: true or false: pipes can be suspended and resumed. true. desc.: pausing or resuming pipes in addition to the pipe owner, a role that has the following minimum permissions can pause or resume the pipe https://docs.snowflake.com/en/user-guide/data-load-snowpipe-intro

F
Franklin Allagoa
7/5/2023 5:16:00 AM

i want hcia exam dumps

S
SSA
12/24/2023 1:18:00 PM

good training

B
BK
8/11/2023 12:23:00 PM

very useful

D
Deepika Narayanan
7/13/2023 11:05:00 PM

yes need this exam dumps

B
Blessious Phiri
8/15/2023 3:31:00 PM

these questions are a great eye opener

J
Jagdesh
9/8/2023 8:17:00 AM

thank you for providing these questions and answers. they helped me pass my exam. you guys are great.

T
TS
7/18/2023 3:32:00 PM

good knowledge

A
Asad Khan
11/1/2023 2:44:00 AM

answer 10 should be a because only a new project will be created & the organization is the same.

R
Raj
9/12/2023 3:49:00 PM

can you please upload the dump again

C
Christian Klein
6/23/2023 1:32:00 PM

is it legit questions from sap certifications ?

A
anonymous
1/12/2024 3:34:00 PM

question 16 should be b (changing the connector settings on the monitor) pc and monitor were powered on. the lights on the pc are on indicating power. the monitor is showing an error text indicating that it is receiving power too. this is a clear sign of having the wrong input selected on the monitor. thus, the "connector setting" needs to be switched from hdmi to display port on the monitor so it receives the signal from the pc, or the other way around (display port to hdmi).

N
NSPK
1/18/2024 10:26:00 AM

q 10. ans is d (in the target org: open deployment settings, click edit next to the source org. select allow inbound changes and save

AI Tutor 👋 I’m here to help!