CWNP PW0-100 Wireless LAN Administration, Certified Wireless Network Administrator (CWNA) PW0-100 Dumps in PDF

Free CWNP PW0-100 Real Questions (page: 8)

Under the 802.11 standard, what modulation is used when transmitting data using FHSS?

  1. CCK
  2. GFSK
  3. BPSK
  4. QPSK

Answer(s): B

Explanation:

(DQPSK), and Gaussian Frequency Shift Keying (GFSK) are the types of modulation used by 802.11 and 802.11b products on the market today.Bluetooth and HomeRF are both FHSS technologies that use GFSK modulation technology in the 2.4 GHz ISM band.
Differential Quadrature Phase Shift Keying



Which of the following features are found in wireless Residential Gateways? (Choose all that apply)

  1. DHCP client
  2. 802.1q
  3. Spanning Tree Protocol (STP)
  4. Network Address Translation (NAT)
  5. PPPoE
  6. 802.1x
  7. 802.11c

Answer(s): A,D,E

Explanation:

Residential wireless gateways are now available with VPN technology, as well as NAT, DHCP, PPPoE, WEP, MAC filters, and perhaps even a built-in firewall.These devices are sufficient for small office or home office environments with few workstations and a shared connection to the Internet. Costs of these units vary greatly depending on their range of offered services. Some of the high-end units even boast static routing and RIPv2.



Which of these WLAN devices cause loss in the RF signal path? (Choose all that apply)

  1. Cable
  2. Connector
  3. Amplifier
  4. Attenuator
  5. Inducer
  6. Inductor

Answer(s): A,B,D

Explanation:

An RF attenuator is a device that causes precisely measured loss (in -dB) in an RF signal.
While an amplifier will increase the RF signal, an attenuator will decrease it.



Beacon frames are used for? (Choose two)

  1. Time synchronization.
  2. Passing channel selection information.
  3. Limiting data requests.
  4. Reserving the medium for QoS implementations.

Answer(s): A,B

Explanation:

According to the book, the beacon frames are used for time synchroniztion and channel information (for DSSS and FHSS).



Which one of the following is necessary as part of an RF Site Survey Report?

  1. Detailed RF coverage area map.
  2. Time sheet itemizing length of time to accomplish survey.
  3. Recommended implementation solution including at least two manufacturer's gear.
  4. Recommended wireless security solutions.

Answer(s): A

Explanation:

An RF site survey is a map to successfully implementing a wireless network. Site surveying involves analyzing a site from an RF perspective and discovering what kind of RF coverage a site needs in order to meet the business goals of the customer. During the site survey process, the surveyor will ask many questions about a variety of topics, which are covered in this chapter. These questions allow the surveyor to gather as much information as possible to make an informed recommendation about what the best options are for hardware, installation, and configuration of a wireless LAN. A site survey is an attempt to define the contours of RF coverage from an RF source (an access point or bridge) in a particular facility. Many issues can arise that prevent the RF signal from reaching certain parts of the facility. For example, if an access point were placed in the center of a medium-sized room, it would be assumed that there would be RF coverage throughout the room. This is not necessarily true due to phenomena such as multipath, near/far, and hidden node. There may be "holes" in the RF coverage pattern due to multipath or stations that cannot talk to the network due to near/far.



Which units of measure below are measurements of relative power (a change in power)? (Choose all that apply)

  1. dBm
  2. dBi
  3. dB
  4. mW

Answer(s): B,C

Explanation:

The units of relative power are db and dbi.



What does the acronym "Wi-Fi" stand for?

  1. Wireless Fiber.
  2. Wireless Interoperability Forum Institution.
  3. Wireless Frequency Industry.
  4. Wireless Fidelity.

Answer(s): D

Explanation:

The Wireless Ethernet Compatibility Alliance (WECA) provides testing of 802.11b compliant DSSS wireless LAN equipment to ensure that such equipment will operate in the presence of and interoperate with other 802.11b DSSS devices. The interoperability standard that WECA created and now uses is called Wireless Fidelity, or Wi-Fi, and those devices that pass the tests for interoperability are "Wi-Fi compliant" devices



By default, IEEE 802.11 devices are set to which type of WEP authentication?

  1. Shared Key Authentication.
  2. Open System Authentication.
  3. No Authentication.
  4. IEEE 802.11 does not specify use of WEP.

Answer(s): B

Explanation:

The IEEE 802.11 standard specifies two methods of authentication: Open System
authenticationand Shared Key authentication. The simpler and also the more secure of the two methods is Open System authentication.



Share your comments for CWNP PW0-100 exam with other users:

B
Bhagiii
11/4/2023 7:04:00 AM

well explained.

R
Rahul
8/8/2023 9:40:00 PM

i need the pdf, please.

C
CW
7/11/2023 2:51:00 PM

a good source for exam preparation

A
Anchal
10/23/2023 4:01:00 PM

nice questions

J
J Nunes
9/29/2023 8:19:00 AM

i need ielts general training audio guide questions

A
Ananya
9/14/2023 5:16:00 AM

please make this content available

S
Swathi
6/4/2023 2:18:00 PM

content is good

L
Leo
7/29/2023 8:45:00 AM

latest dumps please

L
Laolu
2/15/2023 11:04:00 PM

aside from pdf the test engine software is helpful. the interface is user-friendly and intuitive, making it easy to navigate and find the questions.

Z
Zaynik
9/17/2023 5:36:00 AM

questions and options are correct, but the answers are wrong sometimes. so please check twice or refer some other platform for the right answer

M
Massam
6/11/2022 5:55:00 PM

90% of questions was there but i failed the exam, i marked the answers as per the guide but looks like they are not accurate , if not i would have passed the exam given that i saw about 45 of 50 questions from dump

A
Anonymous
12/27/2023 12:47:00 AM

answer to this question "what administrative safeguards should be implemented to protect the collected data while in use by manasa and her product management team? " it should be (c) for the following reasons: this administrative safeguard involves controlling access to collected data by ensuring that only individuals who need the data for their job responsibilities have access to it. this helps minimize the risk of unauthorized access and potential misuse of sensitive information. while other options such as (a) documenting data flows and (b) conducting a privacy impact assessment (pia) are important steps in data protection, implementing a "need to know" access policy directly addresses the issue of protecting data while in use by limiting access to those who require it for legitimate purposes. (d) is not directly related to safeguarding data during use; it focuses on data transfers and location.

J
Japles
5/23/2023 9:46:00 PM

password lockout being the correct answer for question 37 does not make sense. it should be geofencing.

F
Faritha
8/10/2023 6:00:00 PM

for question 4, the righr answer is :recover automatically from failures

A
Anonymous
9/14/2023 4:27:00 AM

question number 4s answer is 3, option c. i

P
p das
12/7/2023 11:41:00 PM

very good questions

A
Anna
1/5/2024 1:12:00 AM

i am confused about the answers to the questions. are the answers correct?

B
Bhavya
9/13/2023 10:15:00 AM

very usefull

R
Rahul Kumar
8/31/2023 12:30:00 PM

need certification.

D
Diran Ole
9/17/2023 5:15:00 PM

great exam prep

V
Venkata Subbarao Bandaru
6/24/2023 8:45:00 AM

i require dump

D
D
7/15/2023 1:38:00 AM

good morning, could you please upload this exam again,

A
Ann
9/15/2023 5:39:00 PM

hi can you please upload the dumps for sap contingent module. thanks

S
Sridhar
1/16/2024 9:19:00 PM

good questions

S
Summer
10/4/2023 9:57:00 PM

looking forward to the real exam

V
vv
12/2/2023 2:45:00 PM

good ones for exam preparation

D
Danny Zas
9/15/2023 4:45:00 AM

this is a good experience

S
SM 1211
10/12/2023 10:06:00 PM

hi everyone

A
A
10/2/2023 6:08:00 PM

waiting for the dump. please upload.

A
Anonymous
7/16/2023 11:05:00 AM

upload cks exam questions

J
Johan
12/13/2023 8:16:00 AM

awesome training material

P
PC
7/28/2023 3:49:00 PM

where is dump

Y
YoloStar Yoloing
10/22/2023 9:58:00 PM

q. 289 - the correct answer should be b not d, since the question asks for the most secure way to provide access to a s3 bucket (a single one), and by principle of the least privilege you should not be giving access to all buckets.

Z
Zelalem Nega
5/14/2023 12:45:00 PM

please i need if possible h12-831,

AI Tutor 👋 I’m here to help!