CWNP Certified Wireless IoT Solutions Administrator CWISA-103 Dumps in PDF

Free CWNP CWISA-103 Real Questions (page: 8)

What function does the IEEE perform in relation to wireless technologies?

  1. Promotes technology and standards development
  2. Designs wireless chipsets
  3. Certified equipment to be compatible
  4. Brings wireless products to market

Answer(s): A

Explanation:

IEEE's Role: The Institute of Electrical and Electronics Engineers (IEEE) is a global organization critical in developing and promoting technical standards across various fields, including wireless technologies.
Standards Work: IEEE creates wireless technology standards like:
IEEE 802.11: Wi-Fi standards

IEEE 802.15.4: Basis for ZigBee, Thread, and other low-power networks reference
IEEE: https://www.ieee.org/



What is the benefit of using SINR as opposed to SNR to reference signal quality at a receiver?

  1. SINR includes interference as well as the noise floor
  2. SNR excludes the noise floor, which skews the results
  3. SINR excludes interference and only measures the noise floor
  4. SNR includes interference measurements that skew the results

Answer(s): A

Explanation:

SINR vs. SNR:
SNR (Signal-to-Noise Ratio): Measures the power of the desired signal relative to background noise. SINR (Signal-to-Interference-plus-Noise Ratio): Considers both background noise and interference from other signals operating on the same frequency.
Practical Importance: SINR is a more realistic indicator of real-world signal quality in wireless environments where interference is a significant factor.


Reference:

SINR: https://en.wikipedia.org/wiki/Signal-to-interference-plus-noise_ratio SNR: https://en.wikipedia.org/wiki/Signal-to-noise_ratio



What is defined as the weakening of signal amplitude as the signal passes through a medium?

  1. Diffraction
  2. Reflection
  3. Attenuation
  4. Scattering

Answer(s): C

Explanation:

Attenuation: Describes the progressive loss of signal strength as it travels through a medium (like air, cables, walls). It's caused by factors like absorption, distance, and obstacles.
Other Phenomena:
Diffraction: Bending of waves around obstacles.
Reflection: Waves bouncing off surfaces.
**Scattering: ** Waves dispersing in multiple directions.


Reference:

Attenuation: https://en.wikipedia.org/wiki/Attenuation



How is ASK modulation different from FSK modulation?

  1. ASK varies the amplitude of the signal while FSK shifts its frequency
  2. FSK is more sensitive to noise than ASK
  3. ASK does not work at high frequencies
  4. ASK can carry more data than FSK

Answer(s): A

Explanation:

Key Modulation Differences:
ASK (Amplitude Shift Keying): Digital data is represented by changes in the amplitude (strength) of a carrier wave.
FSK (Frequency Shift Keying): Digital data is represented by changes in the frequency of a carrier wave.


Reference:

ASK: https://en.wikipedia.org/wiki/Amplitude-shift_keying FSK: https://en.wikipedia.org/wiki/Frequency-shift_keying



What does the number in the various Quadrature Amplitude Modulation levels, such as 16 in QAM- 16 and 64 in QAM-64, indicate? (Choose the single best answer.)

  1. The speed of data transfer, which is four times the number in the QAM level
  2. The channel width, which is stipulated in MHz
  3. The number of target points in the QAM constellation, which are equivalent to amplitude and phase combinations
  4. The number of spatial streams, which is 1/4 the number in the QAM level

Answer(s): C

Explanation:

QAM Constellations: QAM (Quadrature Amplitude Modulation) uses a constellation diagram where points represent unique combinations of amplitude and phase. Bits per Symbol: The number in QAM-XX indicates the number of points:
QAM-16: 16 points = 2^4 = 4 bits per symbol
QAM-64: 64 points = 2^6 = 6 bits per symbol
Higher Data Rates: More points in the constellation enable transmitting more bits per symbol, leading to higher data rates at the same bandwidth.


Reference:

QAM: https://en.wikipedia.org/wiki/Quadrature_amplitude_modulation



What modulation is used by LoRa?

  1. OFDMA
  2. CSS
  3. ASK
  4. OFDM

Answer(s): B

Explanation:

LoRa Modulation: LoRa (Long Range) is a proprietary wireless technology that utilizes Chirp Spread Spectrum (CSS) modulation.

CSS Characteristics:
Spread spectrum technique for resilience against interference. Chirps (frequency sweeps) enable operation below the noise floor for long range.


Reference:

LoRa: https://en.wikipedia.org/wiki/LoRa
Chirp Spread Spectrum (CSS): https://en.wikipedia.org/wiki/Chirp_spread_spectrum



What primary component is required to implement a wireless transceiver in a device?

  1. GPIO pins
  2. SRAM
  3. Flash memory
  4. Radio

Answer(s): D

Explanation:

Wireless Transceiver: A transceiver is a combination of a transmitter and receiver used for wireless communication.
Radio: The radio is the primary component responsible for:
Modulation: Encoding data onto a carrier wave.
Demodulation: Extracting data from a received signal.
Transmission/Reception: Handling the actual sending and receiving of modulated signals over the air.


Reference:

Transceiver: https://en.wikipedia.org/wiki/Transceiver



How does OFDMA differ from OFDM?

  1. Subcarriers of OFDMA can contain data destined for a different receiver
  2. OFDMA offers greater range by using multiple channels at once
  3. OFDMA allows multiple devices to transmit simultaneously on the same frequency
  4. OFDMA uses multiple radios to achieve higher throughput

Answer(s): C

Explanation:

OFDM vs. OFDMA:
OFDM (Orthogonal Frequency-Division Multiplexing): Divides a channel into multiple subcarriers for data transmission.
OFDMA (Orthogonal Frequency-Division Multiple Access): Extends OFDM by allowing multiple users to share subcarriers simultaneously, improving efficiency and spectral utilization.


Reference:

OFDM: https://en.wikipedia.org/wiki/Orthogonal_frequency-division_multiplexing
OFDMA: https://en.wikipedia.org/wiki/Orthogonal_frequency-division_multiple_access



Share your comments for CWNP CWISA-103 exam with other users:

A
Asad Khan
11/1/2023 2:44:00 AM

answer 10 should be a because only a new project will be created & the organization is the same.

R
Raj
9/12/2023 3:49:00 PM

can you please upload the dump again

C
Christian Klein
6/23/2023 1:32:00 PM

is it legit questions from sap certifications ?

A
anonymous
1/12/2024 3:34:00 PM

question 16 should be b (changing the connector settings on the monitor) pc and monitor were powered on. the lights on the pc are on indicating power. the monitor is showing an error text indicating that it is receiving power too. this is a clear sign of having the wrong input selected on the monitor. thus, the "connector setting" needs to be switched from hdmi to display port on the monitor so it receives the signal from the pc, or the other way around (display port to hdmi).

N
NSPK
1/18/2024 10:26:00 AM

q 10. ans is d (in the target org: open deployment settings, click edit next to the source org. select allow inbound changes and save

M
mohamed abdo
9/1/2023 4:59:00 AM

very useful

T
Tom
3/18/2022 8:00:00 PM

i purchased this exam dumps from another website with way more questions but they were all invalid and outdate. this exam dumps was right to the point and all from recent exam. it was a hard pass.

E
Edrick GOP
10/24/2023 6:00:00 AM

it was a good experience and i got 90% in the 200-901 exam.

A
anonymous
8/10/2023 2:28:00 AM

hi please upload this

B
Bakir
7/6/2023 7:24:00 AM

please upload it

A
Aman
6/18/2023 1:27:00 PM

really need this dump. can you please help.

N
Neela Para
1/8/2024 6:39:00 PM

really good and covers many areas explaining the answer.

K
Karan Patel
8/15/2023 12:51:00 AM

yes, can you please upload the exam?

N
NISHAD
11/7/2023 11:28:00 AM

how many questions are there in these dumps?

P
Pankaj
7/3/2023 3:57:00 AM

hi team, please upload this , i need it.

D
DN
9/4/2023 11:19:00 PM

question 14 - run terraform import: this is the recommended best practice for bringing manually created or destroyed resources under terraform management. you use terraform import to associate an existing resource with a terraform resource configuration. this ensures that terraform is aware of the resource, and you can subsequently manage it with terraform.

Z
Zhiguang
8/19/2023 11:37:00 PM

please upload dump. thanks in advance.

D
deedee
12/23/2023 5:51:00 PM

great great

A
Asad Khan
11/1/2023 3:10:00 AM

answer 16 should be b your organizational policies require you to use virtual machines directly

S
Sale Danasabe
10/24/2023 5:21:00 PM

the question are kind of tricky of you didnt get the hnag on it.

L
Luis
11/16/2023 1:39:00 PM

can anyone tell me if this is for rhel8 or rhel9?

H
hik
1/19/2024 1:47:00 PM

good content

B
Blessious Phiri
8/15/2023 2:18:00 PM

pdb and cdb are critical to the database

Z
Zuned
10/22/2023 4:39:00 AM

till 104 questions are free, lets see how it helps me in my exam today.

M
Muhammad Rawish Siddiqui
12/3/2023 12:11:00 PM

question # 56, answer is true not false.

A
Amaresh Vashishtha
8/27/2023 1:33:00 AM

i would be requiring dumps to prepare for certification exam

A
Asad
9/8/2023 1:01:00 AM

very helpful

B
Blessious Phiri
8/13/2023 3:10:00 PM

control file is the heart of rman backup

S
Senthil
9/19/2023 5:47:00 AM

hi could you please upload the ibm c2090-543 dumps

H
Harry
6/27/2023 7:20:00 AM

appriciate if you could upload this again

A
Anonymous
7/10/2023 4:10:00 AM

please upload the dump

R
Raja
6/20/2023 5:30:00 AM

i found some questions answers mismatch with explanation answers. please properly update

D
Doora
11/30/2023 4:20:00 AM

nothing to mention

D
deally
1/19/2024 3:41:00 PM

knowable questions

AI Tutor 👋 I’m here to help!