CWNP Certified Wireless IoT Solutions Administrator CWISA-103 Dumps in PDF

Free CWNP CWISA-103 Real Questions (page: 7)

What function does the IEEE perform in relation to wireless technologies?

  1. Promotes technology and standards development
  2. Designs wireless chipsets
  3. Certified equipment to be compatible
  4. Brings wireless products to market

Answer(s): A

Explanation:

IEEE's Role: The Institute of Electrical and Electronics Engineers (IEEE) is a global organization critical in developing and promoting technical standards across various fields, including wireless technologies.
Standards Work: IEEE creates wireless technology standards like:
IEEE 802.11: Wi-Fi standards

IEEE 802.15.4: Basis for ZigBee, Thread, and other low-power networks reference
IEEE: https://www.ieee.org/



What is the benefit of using SINR as opposed to SNR to reference signal quality at a receiver?

  1. SINR includes interference as well as the noise floor
  2. SNR excludes the noise floor, which skews the results
  3. SINR excludes interference and only measures the noise floor
  4. SNR includes interference measurements that skew the results

Answer(s): A

Explanation:

SINR vs. SNR:
SNR (Signal-to-Noise Ratio): Measures the power of the desired signal relative to background noise. SINR (Signal-to-Interference-plus-Noise Ratio): Considers both background noise and interference from other signals operating on the same frequency.
Practical Importance: SINR is a more realistic indicator of real-world signal quality in wireless environments where interference is a significant factor.


Reference:

SINR: https://en.wikipedia.org/wiki/Signal-to-interference-plus-noise_ratio SNR: https://en.wikipedia.org/wiki/Signal-to-noise_ratio



What is defined as the weakening of signal amplitude as the signal passes through a medium?

  1. Diffraction
  2. Reflection
  3. Attenuation
  4. Scattering

Answer(s): C

Explanation:

Attenuation: Describes the progressive loss of signal strength as it travels through a medium (like air, cables, walls). It's caused by factors like absorption, distance, and obstacles.
Other Phenomena:
Diffraction: Bending of waves around obstacles.
Reflection: Waves bouncing off surfaces.
**Scattering: ** Waves dispersing in multiple directions.


Reference:

Attenuation: https://en.wikipedia.org/wiki/Attenuation



How is ASK modulation different from FSK modulation?

  1. ASK varies the amplitude of the signal while FSK shifts its frequency
  2. FSK is more sensitive to noise than ASK
  3. ASK does not work at high frequencies
  4. ASK can carry more data than FSK

Answer(s): A

Explanation:

Key Modulation Differences:
ASK (Amplitude Shift Keying): Digital data is represented by changes in the amplitude (strength) of a carrier wave.
FSK (Frequency Shift Keying): Digital data is represented by changes in the frequency of a carrier wave.


Reference:

ASK: https://en.wikipedia.org/wiki/Amplitude-shift_keying FSK: https://en.wikipedia.org/wiki/Frequency-shift_keying



What does the number in the various Quadrature Amplitude Modulation levels, such as 16 in QAM- 16 and 64 in QAM-64, indicate? (Choose the single best answer.)

  1. The speed of data transfer, which is four times the number in the QAM level
  2. The channel width, which is stipulated in MHz
  3. The number of target points in the QAM constellation, which are equivalent to amplitude and phase combinations
  4. The number of spatial streams, which is 1/4 the number in the QAM level

Answer(s): C

Explanation:

QAM Constellations: QAM (Quadrature Amplitude Modulation) uses a constellation diagram where points represent unique combinations of amplitude and phase. Bits per Symbol: The number in QAM-XX indicates the number of points:
QAM-16: 16 points = 2^4 = 4 bits per symbol
QAM-64: 64 points = 2^6 = 6 bits per symbol
Higher Data Rates: More points in the constellation enable transmitting more bits per symbol, leading to higher data rates at the same bandwidth.


Reference:

QAM: https://en.wikipedia.org/wiki/Quadrature_amplitude_modulation



What modulation is used by LoRa?

  1. OFDMA
  2. CSS
  3. ASK
  4. OFDM

Answer(s): B

Explanation:

LoRa Modulation: LoRa (Long Range) is a proprietary wireless technology that utilizes Chirp Spread Spectrum (CSS) modulation.

CSS Characteristics:
Spread spectrum technique for resilience against interference. Chirps (frequency sweeps) enable operation below the noise floor for long range.


Reference:

LoRa: https://en.wikipedia.org/wiki/LoRa
Chirp Spread Spectrum (CSS): https://en.wikipedia.org/wiki/Chirp_spread_spectrum



What primary component is required to implement a wireless transceiver in a device?

  1. GPIO pins
  2. SRAM
  3. Flash memory
  4. Radio

Answer(s): D

Explanation:

Wireless Transceiver: A transceiver is a combination of a transmitter and receiver used for wireless communication.
Radio: The radio is the primary component responsible for:
Modulation: Encoding data onto a carrier wave.
Demodulation: Extracting data from a received signal.
Transmission/Reception: Handling the actual sending and receiving of modulated signals over the air.


Reference:

Transceiver: https://en.wikipedia.org/wiki/Transceiver



How does OFDMA differ from OFDM?

  1. Subcarriers of OFDMA can contain data destined for a different receiver
  2. OFDMA offers greater range by using multiple channels at once
  3. OFDMA allows multiple devices to transmit simultaneously on the same frequency
  4. OFDMA uses multiple radios to achieve higher throughput

Answer(s): C

Explanation:

OFDM vs. OFDMA:
OFDM (Orthogonal Frequency-Division Multiplexing): Divides a channel into multiple subcarriers for data transmission.
OFDMA (Orthogonal Frequency-Division Multiple Access): Extends OFDM by allowing multiple users to share subcarriers simultaneously, improving efficiency and spectral utilization.


Reference:

OFDM: https://en.wikipedia.org/wiki/Orthogonal_frequency-division_multiplexing
OFDMA: https://en.wikipedia.org/wiki/Orthogonal_frequency-division_multiple_access



Share your comments for CWNP CWISA-103 exam with other users:

J
J Nunes
9/29/2023 8:19:00 AM

i need ielts general training audio guide questions

A
Ananya
9/14/2023 5:16:00 AM

please make this content available

S
Swathi
6/4/2023 2:18:00 PM

content is good

L
Leo
7/29/2023 8:45:00 AM

latest dumps please

L
Laolu
2/15/2023 11:04:00 PM

aside from pdf the test engine software is helpful. the interface is user-friendly and intuitive, making it easy to navigate and find the questions.

Z
Zaynik
9/17/2023 5:36:00 AM

questions and options are correct, but the answers are wrong sometimes. so please check twice or refer some other platform for the right answer

M
Massam
6/11/2022 5:55:00 PM

90% of questions was there but i failed the exam, i marked the answers as per the guide but looks like they are not accurate , if not i would have passed the exam given that i saw about 45 of 50 questions from dump

A
Anonymous
12/27/2023 12:47:00 AM

answer to this question "what administrative safeguards should be implemented to protect the collected data while in use by manasa and her product management team? " it should be (c) for the following reasons: this administrative safeguard involves controlling access to collected data by ensuring that only individuals who need the data for their job responsibilities have access to it. this helps minimize the risk of unauthorized access and potential misuse of sensitive information. while other options such as (a) documenting data flows and (b) conducting a privacy impact assessment (pia) are important steps in data protection, implementing a "need to know" access policy directly addresses the issue of protecting data while in use by limiting access to those who require it for legitimate purposes. (d) is not directly related to safeguarding data during use; it focuses on data transfers and location.

J
Japles
5/23/2023 9:46:00 PM

password lockout being the correct answer for question 37 does not make sense. it should be geofencing.

F
Faritha
8/10/2023 6:00:00 PM

for question 4, the righr answer is :recover automatically from failures

A
Anonymous
9/14/2023 4:27:00 AM

question number 4s answer is 3, option c. i

P
p das
12/7/2023 11:41:00 PM

very good questions

A
Anna
1/5/2024 1:12:00 AM

i am confused about the answers to the questions. are the answers correct?

B
Bhavya
9/13/2023 10:15:00 AM

very usefull

R
Rahul Kumar
8/31/2023 12:30:00 PM

need certification.

D
Diran Ole
9/17/2023 5:15:00 PM

great exam prep

V
Venkata Subbarao Bandaru
6/24/2023 8:45:00 AM

i require dump

D
D
7/15/2023 1:38:00 AM

good morning, could you please upload this exam again,

A
Ann
9/15/2023 5:39:00 PM

hi can you please upload the dumps for sap contingent module. thanks

S
Sridhar
1/16/2024 9:19:00 PM

good questions

S
Summer
10/4/2023 9:57:00 PM

looking forward to the real exam

V
vv
12/2/2023 2:45:00 PM

good ones for exam preparation

D
Danny Zas
9/15/2023 4:45:00 AM

this is a good experience

S
SM 1211
10/12/2023 10:06:00 PM

hi everyone

A
A
10/2/2023 6:08:00 PM

waiting for the dump. please upload.

A
Anonymous
7/16/2023 11:05:00 AM

upload cks exam questions

J
Johan
12/13/2023 8:16:00 AM

awesome training material

P
PC
7/28/2023 3:49:00 PM

where is dump

Y
YoloStar Yoloing
10/22/2023 9:58:00 PM

q. 289 - the correct answer should be b not d, since the question asks for the most secure way to provide access to a s3 bucket (a single one), and by principle of the least privilege you should not be giving access to all buckets.

Z
Zelalem Nega
5/14/2023 12:45:00 PM

please i need if possible h12-831,

U
unknown-R
11/23/2023 7:36:00 AM

good collection of questions and solution for pl500 certification

S
Swaminathan
5/11/2023 9:59:00 AM

i would like to appear the exam.

V
Veenu
10/24/2023 6:26:00 AM

i am very happy as i cleared my comptia a+ 220-1101 exam. i studied from as it has all exam dumps and mock tests available. i got 91% on the test.

K
Karan
5/17/2023 4:26:00 AM

need this dump

AI Tutor 👋 I’m here to help!