CWNP Certified Wireless Analysis Professional CWAP-405 Dumps in PDF

Free CWNP CWAP-405 Real Questions (page: 14)

After performing a protocol analysis capture on channel 36 you are looking at the radio tap header of a data frame and notice the frame was transmitted at MCS 0 on one spatial stream. At what data rate was the PHY Header for this frame transmitted?

  1. 1 Mbps
  2. 2 Mbps
  3. 6 Mbps
  4. 6.5 Mbps

Answer(s): C

Explanation:

On channel 36 (5 GHz band), the PHY header is always transmitted using one of the basic OFDM rates to ensure all devices can decode it. For 802.11a/n/ac in 5 GHz, the PHY header is sent at 6 Mbps, regardless of the MCS rate used for the data portion of the frame.



What is used in the PHY header of 802.11ax transmissions to identify stations that are included in an OFDMA RU-based multi-user transmission?

  1. Station ID
  2. Station MAC address
  3. Station IP address
  4. Station TCP port

Answer(s): A

Explanation:

In 802.11ax (Wi-Fi 6), the PHY header includes a Station ID (STA-ID) to identify which stations are assigned to specific Resource Units (RUs) during OFDMA multi-user transmissions. This allows multiple clients to be scheduled and coordinated efficiently at the PHY layer.



To what does the channel number displayed in the radio tap header refer?

  1. Channel the frame was transmitted on
  2. Channel the frame was captured on
  3. The channel of the AP to which the protocol analyzer is associated
  4. The channel reported in the channel field of the PHY header

Answer(s): B

Explanation:

The channel number shown in the radio tap header reflects the channel setting of the capture adapter at the time the frame was received. It indicates where the analyzer was listening, not necessarily the channel declared in the PHY header or used by the transmitting AP.



When the Protected bit in the Frame Control field of the MAC header is set to 0, it always indicates:

  1. This is an RSN
  2. Encryption is not enabled for the entire BSS
  3. The frame body is unencrypted
  4. The AP is not operating in FIPS mode

Answer(s): C

Explanation:

The Protected Frame bit in the Frame Control field indicates whether the frame body is encrypted. A value of 0 means the frame body is unencrypted, while a value of 1 means it is encrypted.



You are exploring the packet decode of an 802.11 data frame and notice the To DS and From DS bits of the Frame Control field are both set to 1. Assuming the frame does not have a CRC error, what can you conclude about this frame?

  1. The frame is a retransmission.
  2. The frame has been transmitted on an Ad-Hoc network.
  3. This is non-standard 802.11 behavior and this frame must be part of the proprietary feature.
  4. The frame was transmitted between two WLAN infrastructure devices such as WLAN bridges or Mesh APs.

Answer(s): D

Explanation:

When both To DS and From DS bits are set to 1, it indicates a wireless distribution system (WDS) frame. These are used when frames are forwarded between infrastructure devices like APs in a mesh network or wireless bridge, not between clients and APs.



Which is not a valid interpretation for one of the 4 address fields in the MAC header?

  1. Source address
  2. Receiver address
  3. Transmitter address
  4. Sender address

Answer(s): D

Explanation:

The 802.11 MAC header can contain up to four addresses: source address (SA), transmitter address (TA), receiver address (RA), and destination address (DA). "Sender address" is not a defined field in the standard, making it invalid.



In an infrastructure network, which statement is true concerning the “Power Management” bit and “More Data” bit in the Frame Control field of the MAC header?

  1. The “Power Management” bit should only be set by a client STA and the “More Data” bit should only be set by the AP.
  2. The “Power Management” bit should only be set by the AP and the “More Data” bit should only be set by a client STA.
  3. The “Power Management” bit and the “More Data” bit should only be set by the AP.
  4. The “Power Management” bit and the “More Data” bit should only be set by a client STA.

Answer(s): A

Explanation:

In an infrastructure WLAN, the client STA sets the Power Management bit to signal when it is entering or exiting power save mode. The AP sets the More Data bit to indicate that additional buffered frames are waiting for a client STA, allowing proper coordination of frame delivery.



Which one of the following protocol analyzer features do not make protocol trace files easier to read?

  1. Filtering
  2. Colorization
  3. Naming nodes
  4. Packet slicing

Answer(s): D

Explanation:

Packet slicing reduces the captured frame size to protect sensitive data but does not improve readability of the trace. Features like filtering, colorization, and naming nodes directly help analysts focus on relevant frames and understand communication patterns more easily.



Share your comments for CWNP CWAP-405 exam with other users:

D
David
10/31/2025 4:06:16 PM

Today I wrote this exam and passed, i totally relay on this practice exam. The questions were very tough, these questions are valid and I encounter the same.

T
Thor
10/21/2025 5:16:29 AM

Anyone used this dump recently?

V
Vladimir
9/25/2025 9:11:14 AM

173 question is A not D

K
khaos
9/21/2025 7:07:26 AM

nice questions

K
Katiso Lehasa
9/15/2025 11:21:52 PM

Thanks for the practice questions they helped me a lot.

E
Einstein
9/2/2025 7:42:00 PM

Passed this exam today. All questions are valid and this is not something you can find in ChatGPT.

V
vito
8/22/2025 4:16:51 AM

i need to pass exam for VMware 2V0-11.25

M
Matt
7/31/2025 11:44:40 PM

Great questions.

O
OLERATO
7/1/2025 5:44:14 AM

great dumps to practice for the exam

A
Adekunle willaims
6/9/2025 7:37:29 AM

How reliable and relevant are these questions?? also i can see the last update here was January and definitely new questions would have emerged.

A
Alex
5/24/2025 12:54:15 AM

Can I trust to this source?

S
SPriyak
3/17/2025 11:08:37 AM

can you please provide the CBDA latest test preparation

C
Chandra
11/28/2024 7:17:38 AM

This is the best and only way of passing this exam as it is extremely hard. Good questions and valid dump.

S
Sunak
1/25/2025 9:17:57 AM

Can I use this dumps when I am taking the exam? I mean does somebody look what tabs or windows I have opened ?

F
Frank
2/15/2024 11:36:57 AM

Finally got a change to write this exam and pass it! Valid and accurate!

A
Anonymous User
2/2/2024 6:42:12 PM

Upload this exam please!

N
Nicholas
2/2/2024 6:17:08 PM

Thank you for providing these questions. It helped me a lot with passing my exam.

T
Timi
8/19/2023 5:30:00 PM

my first attempt

B
Blessious Phiri
8/13/2023 10:32:00 AM

very explainable

M
m7md ibrahim
5/26/2023 6:21:00 PM

i think answer of q 462 is variance analysis

T
Tehu
5/25/2023 12:25:00 PM

hi i need see questions

A
Ashfaq Nasir
1/17/2024 1:19:00 AM

best study material for exam

R
Roberto
11/27/2023 12:33:00 AM

very interesting repository

N
Nale
9/18/2023 1:51:00 PM

american history 1

T
Tanvi
9/27/2023 4:02:00 AM

good level of questions

B
Boopathy
8/17/2023 1:03:00 AM

i need this dump kindly upload it

S
s_123
8/12/2023 4:28:00 PM

do we need c# coding to be az204 certified

B
Blessious Phiri
8/15/2023 3:38:00 PM

excellent topics covered

M
Manasa
12/5/2023 3:15:00 AM

are these really financial cloud questions and answers, seems these are basic admin question and answers

N
Not Robot
5/14/2023 5:33:00 PM

are these comments real

K
kriah
9/4/2023 10:44:00 PM

please upload the latest dumps

E
ed
12/17/2023 1:41:00 PM

a company runs its workloads on premises. the company wants to forecast the cost of running a large application on aws. which aws service or tool can the company use to obtain this information? pricing calculator ... the aws pricing calculator is primarily used for estimating future costs

M
Muru
12/29/2023 10:23:00 AM

looks interesting

T
Tech Lady
10/17/2023 12:36:00 PM

thanks! that’s amazing

AI Tutor 👋 I’m here to help!