CWNP Certified Wireless Analysis Professional CWAP-405 Dumps in PDF

Free CWNP CWAP-405 Real Questions (page: 10)

After performing a protocol analysis capture on channel 36 you are looking at the radio tap header of a data frame and notice the frame was transmitted at MCS 0 on one spatial stream. At what data rate was the PHY Header for this frame transmitted?

  1. 1 Mbps
  2. 2 Mbps
  3. 6 Mbps
  4. 6.5 Mbps

Answer(s): C

Explanation:

On channel 36 (5 GHz band), the PHY header is always transmitted using one of the basic OFDM rates to ensure all devices can decode it. For 802.11a/n/ac in 5 GHz, the PHY header is sent at 6 Mbps, regardless of the MCS rate used for the data portion of the frame.



What is used in the PHY header of 802.11ax transmissions to identify stations that are included in an OFDMA RU-based multi-user transmission?

  1. Station ID
  2. Station MAC address
  3. Station IP address
  4. Station TCP port

Answer(s): A

Explanation:

In 802.11ax (Wi-Fi 6), the PHY header includes a Station ID (STA-ID) to identify which stations are assigned to specific Resource Units (RUs) during OFDMA multi-user transmissions. This allows multiple clients to be scheduled and coordinated efficiently at the PHY layer.



To what does the channel number displayed in the radio tap header refer?

  1. Channel the frame was transmitted on
  2. Channel the frame was captured on
  3. The channel of the AP to which the protocol analyzer is associated
  4. The channel reported in the channel field of the PHY header

Answer(s): B

Explanation:

The channel number shown in the radio tap header reflects the channel setting of the capture adapter at the time the frame was received. It indicates where the analyzer was listening, not necessarily the channel declared in the PHY header or used by the transmitting AP.



When the Protected bit in the Frame Control field of the MAC header is set to 0, it always indicates:

  1. This is an RSN
  2. Encryption is not enabled for the entire BSS
  3. The frame body is unencrypted
  4. The AP is not operating in FIPS mode

Answer(s): C

Explanation:

The Protected Frame bit in the Frame Control field indicates whether the frame body is encrypted. A value of 0 means the frame body is unencrypted, while a value of 1 means it is encrypted.



You are exploring the packet decode of an 802.11 data frame and notice the To DS and From DS bits of the Frame Control field are both set to 1. Assuming the frame does not have a CRC error, what can you conclude about this frame?

  1. The frame is a retransmission.
  2. The frame has been transmitted on an Ad-Hoc network.
  3. This is non-standard 802.11 behavior and this frame must be part of the proprietary feature.
  4. The frame was transmitted between two WLAN infrastructure devices such as WLAN bridges or Mesh APs.

Answer(s): D

Explanation:

When both To DS and From DS bits are set to 1, it indicates a wireless distribution system (WDS) frame. These are used when frames are forwarded between infrastructure devices like APs in a mesh network or wireless bridge, not between clients and APs.



Which is not a valid interpretation for one of the 4 address fields in the MAC header?

  1. Source address
  2. Receiver address
  3. Transmitter address
  4. Sender address

Answer(s): D

Explanation:

The 802.11 MAC header can contain up to four addresses: source address (SA), transmitter address (TA), receiver address (RA), and destination address (DA). "Sender address" is not a defined field in the standard, making it invalid.



In an infrastructure network, which statement is true concerning the “Power Management” bit and “More Data” bit in the Frame Control field of the MAC header?

  1. The “Power Management” bit should only be set by a client STA and the “More Data” bit should only be set by the AP.
  2. The “Power Management” bit should only be set by the AP and the “More Data” bit should only be set by a client STA.
  3. The “Power Management” bit and the “More Data” bit should only be set by the AP.
  4. The “Power Management” bit and the “More Data” bit should only be set by a client STA.

Answer(s): A

Explanation:

In an infrastructure WLAN, the client STA sets the Power Management bit to signal when it is entering or exiting power save mode. The AP sets the More Data bit to indicate that additional buffered frames are waiting for a client STA, allowing proper coordination of frame delivery.



Which one of the following protocol analyzer features do not make protocol trace files easier to read?

  1. Filtering
  2. Colorization
  3. Naming nodes
  4. Packet slicing

Answer(s): D

Explanation:

Packet slicing reduces the captured frame size to protect sensitive data but does not improve readability of the trace. Features like filtering, colorization, and naming nodes directly help analysts focus on relevant frames and understand communication patterns more easily.



Share your comments for CWNP CWAP-405 exam with other users:

P
poran
11/20/2023 4:43:00 AM

good analytics question

A
Antony
11/23/2023 11:36:00 AM

this looks accurate

E
Ethan
8/23/2023 12:52:00 AM

question 46, the answer should be data "virtualization" (not visualization).

N
nSiva
9/22/2023 5:58:00 AM

its useful.

R
Ranveer
7/26/2023 7:26:00 PM

Pass this exam 3 days ago. The PDF version and the Xengine App is quite useful.

S
Sanjay
8/15/2023 10:22:00 AM

informative for me.

T
Tom
12/12/2023 8:53:00 PM

question 134s answer shoule be "dlp"

A
Alex
11/7/2023 11:02:00 AM

in 72 the answer must be [sys_user_has_role] table.

F
Finn
5/4/2023 10:21:00 PM

i appreciated the mix of multiple-choice and short answer questions. i passed my exam this morning.

A
AJ
7/13/2023 8:33:00 AM

great to find this website, thanks

C
Curtis Nakawaki
6/29/2023 9:11:00 PM

examination questions seem to be relevant.

U
Umashankar Sharma
10/22/2023 9:39:00 AM

planning to take psm test

E
ED SHAW
7/31/2023 10:34:00 AM

please allow to download

A
AD
7/22/2023 11:29:00 AM

please provide dumps

A
Ayyjayy
11/6/2023 7:29:00 AM

is the answer to question 15 correct ? i feel like the answer should be b

B
Blessious Phiri
8/12/2023 11:56:00 AM

its getting more technical

J
Jeanine J
7/11/2023 3:04:00 PM

i think these questions are what i need.

A
Aderonke
10/23/2023 2:13:00 PM

helpful assessment

T
Tom
1/5/2024 2:32:00 AM

i am confused about the answers to the questions. do you know if the answers are correct?

V
Vinit N.
8/28/2023 2:33:00 AM

hi, please make the dumps available for my upcoming examination.

S
Sanyog Deshpande
9/14/2023 7:05:00 AM

good practice

T
Tyron
9/8/2023 12:12:00 AM

so far it is really informative

B
beast
7/30/2023 2:22:00 PM

hi i want it please please upload it

M
Mirex
5/26/2023 3:45:00 AM

am preparing for exam ,just nice questions

E
exampei
8/7/2023 8:05:00 AM

please upload c_tadm_23 exam

A
Anonymous
9/12/2023 12:50:00 PM

can we get tdvan4 vantage data engineering pdf?

A
Aish
10/11/2023 5:51:00 AM

want to clear the exam.

S
Smaranika
6/22/2023 8:42:00 AM

could you please upload the dumps of sap c_sac_2302

B
Blessious Phiri
8/15/2023 1:56:00 PM

asm management configuration is about storage

L
Lewis
7/6/2023 8:49:00 PM

kool thumb up

M
Moreece
5/15/2023 8:44:00 AM

just passed the az-500 exam this last friday. most of the questions in this exam dumps are in the exam. i bought the full version and noticed some of the questions which were answered wrong in the free version are all corrected in the full version. this site is good but i wish the had it in an interactive version like a test engine simulator.

T
Terry
5/24/2023 4:41:00 PM

i can practice for exam

E
Emerys
7/29/2023 6:55:00 AM

please i need this exam.

G
Goni Mala
9/2/2023 12:27:00 PM

i need the dump

AI Tutor 👋 I’m here to help!