Cisco Meraki Solutions Specialist 500-220 Dumps in PDF

Free Cisco 500-220 Real Questions (page: 12)

Which two features and functions are supported when using an MX appliance in Passthrough mode? (Choose two.)

  1. intrusion prevention
  2. site-to-site VPN
  3. secondary uplinks
  4. DHCP
  5. high availability

Answer(s): A,B

Explanation:

These are the two features and functions that are supported when using an MX appliance in Passthrough mode. According to the [MX Addressing and VLANs] article, Passthrough mode allows the MX appliance to act as a layer 2 bridge, passing traffic between its LAN and WAN ports without performing any routing or address translation. However, some features such as intrusion prevention and site-to-site VPN are still available in this mode.


Reference:

https://documentation.meraki.com/MX/Networks_and_Routing/ Passthrough_Mode_on_the_MX_Security_Appliance_and_Z-series_Teleworker_Gateway



Refer to the exhibit.



What are the Loss and Average Latency statistics based on?

  1. responses that the MX appliance receives on the connectivity-testing hostnames on the Insight > Web App Health page
  2. responses that the MX appliance receives on the connectivity-testing IP addresses on the Security & SD- WAN > Firewall page
  3. responses that the MX appliance receives on the connectivity-testing IP address that is configured on the Security & SD-WAN > SD-WAN & Traffic Shaping page
  4. responses that the MX appliance receives on the connectivity-testing IP addresses on the Help > Firewall info page

Answer(s): C

Explanation:

Quote from referred documentation-Link: Loss and latency will be determined over the configured IP address under Security and SD-WAN > SD-WAN and Traffic Shaping > Uplink Statistics. If no IP is configured, these values will be measured against 8.8.8.8 by default. On the WAN Health page, all the configured IP address statistics can be reviewed by changing the destination under the "Ping Destination" column.
https://documentation.meraki.com/MI/MI_WAN_Health#:~:text=Current%20loss%20and%20latenc y%20statistics,address%20is%20set%20to%208.8.



In an organization that uses the Co-Termination licensing model, which two operations enable licenses to be applied? (Choose two.)

  1. Renew the Dashboard license.
  2. License a network.
  3. License more devices.
  4. Call Meraki support.
  5. Wait for the devices to auto-renew.

Answer(s): A,C

Explanation:

There are two operations in which a license can be applied, License more devices or Renew my dashboard license. This article will compare both operations and describe their behaviors. https://documentation.meraki.com/General_Administration/Licensing/Meraki_Licensing_- _License_More_Devices_vs_Renewal
These are the two operations that enable licenses to be applied in an organization that uses the Co- Termination licensing model. According to the Meraki Co-Termination Licensing Overview, there are two ways to add licenses to an organization:
Renewing the Dashboard license: This option allows you to extend the co-termination date of your organization by purchasing new licenses for the same or longer term as your existing licenses. You can renew your Dashboard license from the Organization > Configure > License Info page or from the Meraki Dashboard homepage.
Licensing more devices: This option allows you to add new devices to your organization by purchasing new licenses for them. You can license more devices from the Organization > Inventory page or from the Meraki Dashboard homepage.



Which two Systems Manager Live tools are available only for Apple Macs and Windows PCs and cannot be used on iOS or Android mobile devices? (Choose two.)

  1. OS updates
  2. Send notification
  3. Selective wipe
  4. Screenshot
  5. Remote Desktop

Answer(s): D,E

Explanation:

https://documentation.meraki.com/SM/Monitoring_and_Reporting/MDM_Commands_in_Systems _Manager - Under Live Tools Selective Wiping is only for MacOS. Here we have Windows Laptop as well


Reference:

https://documentation.meraki.com/SM/Other_Topics/Systems_Manager_FAQ



What are two ways peers interact with ports that Auto VPN uses? (Choose two.)

  1. For IPsec tunneling, peers use high UDP ports within the 32768 to 61000 range.
  2. Peers contact the VPN registry at UDP port 9350.
  3. For IPsec tunneling, peers use high TCP ports within the 32768 to 61000 range.
  4. Peers contact the VPN registry at TCP port 9350.
  5. For IPsec tunneling, peers use UDP ports 500 and 4500.

Answer(s): A,B

Explanation:

Ports used to contact the VPN registry:
- Source UDP port range 32768-61000
- Destination UDP port 9350 or UDP port 9351

Ports used for IPsec tunneling:
- Source UDP port range 32768-61000
- Destination UDP port range 32768-61000

https://documentation.meraki.com/MX/Site-to-site_VPN/Meraki_Auto_VPN_- _Configuration_and_Troubleshooting


Reference:

https://documentation.meraki.com/MX/Site-to-site_VPN/Meraki_Auto_VPN_- _Configuration_and_Troubleshooting



Share your comments for Cisco 500-220 exam with other users:

E
Einstein
11/8/2025 4:13:37 AM

Passed this exam in first appointment. Great resource and valid exam dump.

D
David
10/31/2025 4:06:16 PM

Today I wrote this exam and passed, i totally relay on this practice exam. The questions were very tough, these questions are valid and I encounter the same.

T
Thor
10/21/2025 5:16:29 AM

Anyone used this dump recently?

V
Vladimir
9/25/2025 9:11:14 AM

173 question is A not D

K
khaos
9/21/2025 7:07:26 AM

nice questions

K
Katiso Lehasa
9/15/2025 11:21:52 PM

Thanks for the practice questions they helped me a lot.

E
Einstein
9/2/2025 7:42:00 PM

Passed this exam today. All questions are valid and this is not something you can find in ChatGPT.

V
vito
8/22/2025 4:16:51 AM

i need to pass exam for VMware 2V0-11.25

M
Matt
7/31/2025 11:44:40 PM

Great questions.

O
OLERATO
7/1/2025 5:44:14 AM

great dumps to practice for the exam

A
Adekunle willaims
6/9/2025 7:37:29 AM

How reliable and relevant are these questions?? also i can see the last update here was January and definitely new questions would have emerged.

A
Alex
5/24/2025 12:54:15 AM

Can I trust to this source?

S
SPriyak
3/17/2025 11:08:37 AM

can you please provide the CBDA latest test preparation

C
Chandra
11/28/2024 7:17:38 AM

This is the best and only way of passing this exam as it is extremely hard. Good questions and valid dump.

S
Sunak
1/25/2025 9:17:57 AM

Can I use this dumps when I am taking the exam? I mean does somebody look what tabs or windows I have opened ?

F
Frank
2/15/2024 11:36:57 AM

Finally got a change to write this exam and pass it! Valid and accurate!

A
Anonymous User
2/2/2024 6:42:12 PM

Upload this exam please!

N
Nicholas
2/2/2024 6:17:08 PM

Thank you for providing these questions. It helped me a lot with passing my exam.

T
Timi
8/19/2023 5:30:00 PM

my first attempt

B
Blessious Phiri
8/13/2023 10:32:00 AM

very explainable

M
m7md ibrahim
5/26/2023 6:21:00 PM

i think answer of q 462 is variance analysis

T
Tehu
5/25/2023 12:25:00 PM

hi i need see questions

A
Ashfaq Nasir
1/17/2024 1:19:00 AM

best study material for exam

R
Roberto
11/27/2023 12:33:00 AM

very interesting repository

N
Nale
9/18/2023 1:51:00 PM

american history 1

T
Tanvi
9/27/2023 4:02:00 AM

good level of questions

B
Boopathy
8/17/2023 1:03:00 AM

i need this dump kindly upload it

S
s_123
8/12/2023 4:28:00 PM

do we need c# coding to be az204 certified

B
Blessious Phiri
8/15/2023 3:38:00 PM

excellent topics covered

M
Manasa
12/5/2023 3:15:00 AM

are these really financial cloud questions and answers, seems these are basic admin question and answers

N
Not Robot
5/14/2023 5:33:00 PM

are these comments real

K
kriah
9/4/2023 10:44:00 PM

please upload the latest dumps

E
ed
12/17/2023 1:41:00 PM

a company runs its workloads on premises. the company wants to forecast the cost of running a large application on aws. which aws service or tool can the company use to obtain this information? pricing calculator ... the aws pricing calculator is primarily used for estimating future costs

M
Muru
12/29/2023 10:23:00 AM

looks interesting

AI Tutor 👋 I’m here to help!