Which two features and functions are supported when using an MX appliance in Passthrough mode? (Choose two.)
Answer(s): A,B
These are the two features and functions that are supported when using an MX appliance in Passthrough mode. According to the [MX Addressing and VLANs] article, Passthrough mode allows the MX appliance to act as a layer 2 bridge, passing traffic between its LAN and WAN ports without performing any routing or address translation. However, some features such as intrusion prevention and site-to-site VPN are still available in this mode.
https://documentation.meraki.com/MX/Networks_and_Routing/ Passthrough_Mode_on_the_MX_Security_Appliance_and_Z-series_Teleworker_Gateway
Refer to the exhibit.What are the Loss and Average Latency statistics based on?
Answer(s): C
Quote from referred documentation-Link: Loss and latency will be determined over the configured IP address under Security and SD-WAN > SD-WAN and Traffic Shaping > Uplink Statistics. If no IP is configured, these values will be measured against 8.8.8.8 by default. On the WAN Health page, all the configured IP address statistics can be reviewed by changing the destination under the "Ping Destination" column.https://documentation.meraki.com/MI/MI_WAN_Health#:~:text=Current%20loss%20and%20latenc y%20statistics,address%20is%20set%20to%208.8.
In an organization that uses the Co-Termination licensing model, which two operations enable licenses to be applied? (Choose two.)
Answer(s): A,C
There are two operations in which a license can be applied, License more devices or Renew my dashboard license. This article will compare both operations and describe their behaviors. https://documentation.meraki.com/General_Administration/Licensing/Meraki_Licensing_- _License_More_Devices_vs_RenewalThese are the two operations that enable licenses to be applied in an organization that uses the Co- Termination licensing model. According to the Meraki Co-Termination Licensing Overview, there are two ways to add licenses to an organization:Renewing the Dashboard license: This option allows you to extend the co-termination date of your organization by purchasing new licenses for the same or longer term as your existing licenses. You can renew your Dashboard license from the Organization > Configure > License Info page or from the Meraki Dashboard homepage.Licensing more devices: This option allows you to add new devices to your organization by purchasing new licenses for them. You can license more devices from the Organization > Inventory page or from the Meraki Dashboard homepage.
Which two Systems Manager Live tools are available only for Apple Macs and Windows PCs and cannot be used on iOS or Android mobile devices? (Choose two.)
Answer(s): D,E
https://documentation.meraki.com/SM/Monitoring_and_Reporting/MDM_Commands_in_Systems _Manager - Under Live Tools Selective Wiping is only for MacOS. Here we have Windows Laptop as well
https://documentation.meraki.com/SM/Other_Topics/Systems_Manager_FAQ
What are two ways peers interact with ports that Auto VPN uses? (Choose two.)
Ports used to contact the VPN registry:- Source UDP port range 32768-61000- Destination UDP port 9350 or UDP port 9351Ports used for IPsec tunneling:- Source UDP port range 32768-61000- Destination UDP port range 32768-61000https://documentation.meraki.com/MX/Site-to-site_VPN/Meraki_Auto_VPN_- _Configuration_and_Troubleshooting
https://documentation.meraki.com/MX/Site-to-site_VPN/Meraki_Auto_VPN_- _Configuration_and_Troubleshooting
Share your comments for Cisco 500-220 exam with other users:
explained answers
plan to take theaws certified developer - associate dva-c02 in the next few weeks
very helpfull
good questions
help to practice csa exam
nice tip and well documented
i need the exam
please upload
prepping for fsc exam
pd1 with great experience
@t it seems like azure service bus message quesues could be the best solution
helpful to check your understanding.
question 128 the answer should be static not auto
more comments here
great support to appear for exams
useful dumps
making progress
q31 answer should be d i think
is this real?
q10: c and f are also true. q11: this is outdated. you no longer need ownership on a pipe to operate it
good questions with simple explanation
admin guide (windows) respond to malicious causality chains. when the cortex xdr agent identifies a remote network connection that attempts to perform malicious activity—such as encrypting endpoint files—the agent can automatically block the ip address to close all existing communication and block new connections from this ip address to the endpoint. when cortex xdrblocks an ip address per endpoint, that address remains blocked throughout all agent profiles and policies, including any host-firewall policy rules. you can view the list of all blocked ip addresses per endpoint from the action center, as well as unblock them to re-enable communication as appropriate. this module is supported with cortex xdr agent 7.3.0 and later. select the action mode to take when the cortex xdr agent detects remote malicious causality chains: enabled (default)—terminate connection and block ip address of the remote connection. disabled—do not block remote ip addresses. to allow specific and known s
very inciting
question 5, it seems a instead of d, because: - care plan = case - patient = person account - product = product2;
it look like real one
i am taking oracle fcc certification test next two days, pls share question dumps
i need dumps
its time to comptia sec+
question 35 has an answer for a different question. i believe the answer is "a" because it shut off the firewall. "0" in registry data means that its false (aka off).
helpful content
oracle 19c is complex db
helpful for practice
support team is fast and deeply knowledgeable. i appreciate that a lot.
helpful questions
Keeping this site free takes real effort. We constantly battle automated scraping and unauthorized content copying. A quick account helps us protect the community and keep the site free.
To continue studying for your 500-220, please sign in or create a free account.