Cisco Certified Design Expert CCDE v3.0 400-007 Dumps in PDF

Free Cisco 400-007 Real Questions (page: 11)

An enterprise network has two core routers that connect to 200 distribution routers and uses full-mesh iBGP peering between these routers as its routing method. The distribution routers are experiencing high CPU utilization due to the BGP process. Which design solution is the most cost effective?

  1. Increase the memory on the core routers.
  2. Increase bandwidth between the core routers.
  3. Implement eBGP between the core and distribution routers.
  4. Increase the memory on the distribution routers.
  5. Implement route reflectors on the two core routers.

Answer(s): E

Explanation:

Route reflectors are a way to reduce the number of BGP sessions that need to be established between routers. This can help to reduce the CPU utilization on the distribution routers.

The other options are not as cost-effective. Option A, increasing the memory on the core routers, is not a cost-effective solution because it would require the purchase of new memory modules. Option B, increasing bandwidth between the core routers, is not a cost-effective solution because it would require the purchase of new routers or switches. Option C, implementing eBGP between the core and distribution routers, is not a cost-effective solution because it would require the configuration of all of the routers in the network. Option D, increasing the memory on the distribution routers, is not a cost-effective solution because it would require the purchase of new memory modules for all of the distribution routers.

Therefore, the most cost-effective design solution is to implement route reflectors on the two core routers.

Here are some additional reasons why the other options are not as cost-effective:

-Increasing the memory on the core routers would require the purchase of new memory modules.
-Increasing bandwidth between the core routers would require the purchase of new routers or switches.
-Implementing eBGP between the core and distribution routers would require the configuration of all of the routers in the network.
-Increasing the memory on the distribution routers would require the purchase of new memory modules for all of the distribution routers.
-



Which purpose of a dynamically created tunnel interface on the design of IPv6 multicast services is true?

  1. first-hop router registration to the RP
  2. multicast source registration to the RP
  3. multicast client registration to the RP
  4. transport of all IPv6 multicast traffic

Answer(s): D

Explanation:

A dynamically created tunnel interface is a virtual interface that is created on a router when it needs to forward multicast traffic to a remote network. The tunnel interface is created dynamically because the router does not know the destination of the multicast traffic until it receives it.

The other options are not true. Option A, first-hop router registration to the RP, is not the purpose of a dynamically created tunnel interface. The first-hop router registers with the RP using unicast traffic. Option B, multicast source registration to the RP, is not the purpose of a dynamically created tunnel interface. The multicast source registers with the RP using unicast traffic. Option C, multicast client registration to the RP, is not the purpose of a dynamically created tunnel interface. The multicast client registers with the RP using unicast traffic.



Company XYZ network runs IPv4 and IPv6 and they want to introduce a multidomain, multicast-based network. The new design should use a flavor of PIM that forwards traffic using SPT. Which technology meets this requirement?

  1. PIM-SSM
  2. PIM-SM
  3. BIDIR-PIM
  4. PIM-DM

Answer(s): A

Explanation:

PIM source-specific multicast (SSM) uses a subset of PIM sparse mode and IGMP version 3 (IGMPv3) to allow a client to receive multicast traffic directly from the source. PIM SSM uses the PIM sparse-mode functionality to create an SPT between the receiver and the source, but builds the SPT without the help of an RP.

IPv6 multicast provides support for intradomain (not interdomain) multicast routing using PIM sparse mode (PIM-SM). PIM-SM uses unicast routing to provide reverse-path information for multicast tree building, but it is not dependent on any particular unicast routing protocol.



Company XYZ has 30 sites running a legacy private WAN architecture that connects to the Internet via multiple high-speed connections. The company is now redesigning their network and must comply with these design requirements:

•Use a private WAN strategy that allows the sites to connect to each other directly and caters for future expansion
•Use the Internet as the underlay for the private WAN
•Securely transfer the corporate data over the private WAN

Which two technologies should be incorporated into the design of this network? (Choose two.)

  1. PPTP
  2. DMVPN
  3. IPsec
  4. GET VPN
  5. S-VTI

Answer(s): B,C

Explanation:

Internet as underlay, GETVPN is not an option due to IP header preservation.


Reference:

GETVPN does not support internet overlay due to IP header preservation
https://ipwithease.com/getvpn-vs-dmvpn/





Refer to the exhibit. An engineer is designing the traffic flow for AS 111. Traffic from AS 111 should be preferred via AS 100 for all external routes. A method must be used that only affects AS 111. Which BGP attributes are best suited to control outbound traffic?

  1. MED
  2. community
  3. local preference
  4. AS path

Answer(s): C



Share your comments for Cisco 400-007 exam with other users:

D
Dass
11/2/2023 7:43:00 AM

question no 22: correct answers: bc, 1 per session 1 per page 1 per component always

R
Reddy
12/14/2023 2:42:00 AM

these are pretty useful

D
Daisy Delgado
1/9/2023 1:05:00 PM

awesome

A
Atif
6/13/2023 4:09:00 AM

yes please upload

X
Xunil
6/12/2023 3:04:00 PM

great job whoever put this together, for the greater good! thanks!

L
Lakshmi
10/2/2023 5:26:00 AM

just started to view all questions for the exam

R
rani
1/19/2024 11:52:00 AM

helpful material

G
Greg
11/16/2023 6:59:00 AM

hope for the best

H
hi
10/5/2023 4:00:00 AM

will post exam has finished

V
Vmotu
8/24/2023 11:14:00 AM

really correct and good analyze!

H
hicham
5/30/2023 8:57:00 AM

excellent thanks a lot

S
Suman C
7/7/2023 8:13:00 AM

will post once pass the cka exam

R
Ram
11/3/2023 5:10:00 AM

good content

N
Nagendra Pedipina
7/13/2023 2:12:00 AM

q:32 answer has to be option c

T
Tamer Barakat
12/7/2023 5:17:00 PM

nice questions

D
Daryl
8/1/2022 11:33:00 PM

i really like the support team in this website. they are fast in communication and very helpful.

C
Curtis Nakawaki
6/29/2023 9:13:00 PM

a good contemporary exam review

X
x-men
5/23/2023 1:02:00 AM

q23, its an array, isnt it? starts with [ and end with ]. its an array of objects, not object.

A
abuti
7/21/2023 6:24:00 PM

cool very helpfull

K
Krishneel
3/17/2023 10:34:00 AM

i just passed. this exam dumps is the same one from prepaway and examcollection. it has all the real test questions.

R
Regor
12/4/2023 2:01:00 PM

is this a valid prince2 practitioner dumps?

A
asl
9/14/2023 3:59:00 PM

all are relatable questions

S
Siyya
1/19/2024 8:30:00 PM

might help me to prepare for the exam

T
Ted
6/21/2023 11:11:00 PM

just paid and downlaod the 2 exams using the 50% sale discount. so far i was able to download the pdf and the test engine. all looks good.

P
Paul K
11/27/2023 2:28:00 AM

i think it should be a,c. option d goes against the principle of building anything custom unless there are no work arounds available

P
ph
6/16/2023 12:41:00 AM

very legible

S
sephs2001
7/31/2023 10:42:00 PM

is this exam accurate or helpful?

A
ash
7/11/2023 3:00:00 AM

please upload dump, i have exam in 2 days

S
Sneha
8/17/2023 6:29:00 PM

this is useful

S
sachin
12/27/2023 2:45:00 PM

question 232 answer should be perimeter not netowrk layer. wrong answer selected

T
tomAws
7/18/2023 5:05:00 AM

nice questions

R
Rahul
6/11/2023 2:07:00 AM

hi team, could you please provide this dump ?

T
TeamOraTech
12/5/2023 9:49:00 AM

very helpful to clear the exam and understand the concept.

C
Curtis
7/12/2023 8:20:00 PM

i think it is great that you are helping people when they need it. thanks.

AI Tutor 👋 I’m here to help!