Cisco® 350-401 Exam (page: 30)
Cisco® Implementing Enterprise Network Core Technologies (ENCOR)
Updated on: 02-Jan-2026

Viewing Page 30 of 214

Company policy restricts VLAN 10 to be allowed only on SW1 and SW2. All other VLANs can be on all three switches. An administrator has noticed that VLAN 10 has propagated to SW3.
Which configuration corrects the issue?

  1. SW1(config)#int gi1/1 SW1(config)#switchport trunk allowed vlan 1-9,11-4094
  2. SW2(config)#int gi1/2 SW2(config)#switchport trunk allowed vlan 10
  3. SW2(config)#int gi1/2 SW2(config)#switchport trunk allowed vlan 1-9,11-4094
  4. SW1(config)#int gi1/1 SW1(config)#switchport trunk allowed vlan 10

Answer(s): C



Which First Hop Redundancy Protocol should be used to meet a design requirement for more efficient default gateway bandwidth usage across multiple devices?

  1. GLBP
  2. LACP
  3. HSRP
  4. VRRP

Answer(s): A



A client device roams between access points located on different floors in an atrium. The access points are joined to the same controller and configured in local mode. The access points are in different AP groups and have different IP addresses, but the client VLAN in the groups is the same.
Which type of roam occurs?

  1. inter-controller
  2. inter-subnet
  3. intra-VLAN
  4. intra-controller

Answer(s): D


Reference:

https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-3/config-guide/b_cg83/b_cg83_chapter_010011.html



Which DHCP option helps lightweight APs find the IP address of a wireless LAN controller?

  1. Option 43
  2. Option 60
  3. Option 67
  4. Option 150

Answer(s): A



Refer to the exhibit.
A network engineer is configuring OSPF between router R1 and router R2. The engineer must ensure that a DR/BDR election does not occur on the Gigabit
Ethernet interfaces in area 0.
Which configuration set accomplishes this goal?

  1. R1(config-if)interface Gi0/0 R1(config-if)ip ospf network point-to-point R2(config-if)interface Gi0/0 R2(config-if)ip ospf network point-to-point
  2. R1(config-if)interface Gi0/0 R1(config-if)ip ospf network broadcast R2(config-if)interface Gi0/0 R2(config-if)ip ospf network broadcast
  3. R1(config-if)interface Gi0/0 R1(config-if)ip ospf database-filter all out R2(config-if)interface Gi0/0 R2(config-if)ip ospf database-filter all out
  4. R1(config-if)interface Gi0/0 R1(config-if)ip ospf priority 1 R2(config-if)interface Gi0/0 R2(config-if)ip ospf priority 1

Answer(s): A



Viewing Page 30 of 214



Share your comments for Cisco® 350-401 exam with other users:

Big Dog 6/24/2023 4:47:00 PM

question 13 should be dhcp option 43, right?
UNITED STATES


BigMouthDog 1/22/2022 8:17:00 PM

hi team just want to know if there is any update version of the exam 350-401
AUSTRALIA


Desmond 1/5/2023 9:11:00 PM

i just took my oracle exam and let me tell you, this exam dumps was a lifesaver! without them, iam not sure i would have passed. the questions were tricky and the answers were obscure, but the exam dumps had everything i needed. i would recommend to anyone looking to pass their oracle exams with flying colors (and a little bit of cheating) lol.
SINGAPORE


whoAreWeReally 12/19/2023 8:29:00 PM

took the test last week, i did have about 15 - 20 word for word from this site on the test. (only was able to cram 600 of the questions from this site so maybe more were there i didnt review) had 4 labs, bgp, lacp, vrf with tunnels and actually had to skip a lab due to time. lots of automation syntax questions.
EUROPEAN UNION


mrtom33 11/20/2023 4:51:00 AM

i prepared for the eccouncil 350-401 exam. i scored 92% on the test.
Anonymous


Nigora 5/31/2022 10:05:00 PM

this is a beautiful tool. passed after a week of studying.
UNITED STATES