Cisco® 350-401 Exam (page: 20)
Cisco® Implementing Enterprise Network Core Technologies (ENCOR)
Updated on: 02-Jan-2026

Viewing Page 20 of 214

Which two components are supported by LISP? (Choose two.)

  1. proxy ETR
  2. egress tunnel router
  3. route reflector
  4. HMAC algorithm
  5. spoke

Answer(s): A,B



What is the function of a VTEP in VXLAN?

  1. provide the routing underlay and overlay for VXLAN headers
  2. dynamically discover the location of end hosts in a VXLAN fabric
  3. encapsulate and de-encapsulate traffic into and out of the VXLAN fabric
  4. statically point to end host locations of the VXLAN fabric

Answer(s): C



Refer to the exhibit.
Which configuration must be applied to R1 to enable R1 to reach the server at 172.16.0.1?

  1. interface Ethernet0/0 ip address 172.16.0.7 255.255.0.0 router ospf 44 vrf bank network 172.16.0.0 255.255.0.0
  2. interface Ethernet0/0 vrf forwarding hotel ip address 172.16.0.7 255.255.0.0 router ospf 44 vrf Hotel network 172.16.0.0 0.0.255.255 area 0
  3. interface Ethernet0/0 vrf forwarding bank ip address 172.16.0.7 255.255.0.0 router ospf 44 vrf bank network 172.16.0.0 0.0.255.255 area 0
  4. interface Ethernet0/0 ip address 172.16.0.7 255.255.0.0 router ospf 44 vrf hotel network 172.16.0.0 255.255.0.0

Answer(s): C



Refer to the exhibit.
Which configuration allows Customer2 hosts to access the FTP server of Customer1 that has the IP address of 192.168.1.200?

  1. ip route vrf Customer1 172.16.1.0 255.255.255.0 172.16.1.1 global ip route vrf Customer2 192.168.1.200 255.255.255.255 192.168.1.1 global ip route 192.168.1.0 255.255.255.0 Vlan10 ip route 172.16.1.0 255.255.255.0 Vlan20
  2. ip route vrf Customer1 172.16.1.1 255.255.255.255 172.16.1.1 global ip route vrf Customer2 192.168.1.200 255.255.255.0 192.168.1.1 global ip route 192.168.1.0 255.255.255.0 Vlan10 ip route 172.16.1.0 255.255.255.0 Vlan20
  3. ip route vrf Customer1 172.16.1.0 255.255.255.0 172.16.1.1 Customer2 ip route vrf Customer2 192.168.1.200 255.255.255.255 192.168.1.1 Customer1
  4. ip route vrf Customer1 172.16.1.0 255.255.255.0 172.16.1.1 Customer1 ip route vrf Customer2 192.168.1.200 255.255.255.255 192.168.1.1 Customer2

Answer(s): A



Refer to the exhibit. A network engineer configures a new GRE tunnel and enters the show run command.
What does the output verify?

  1. The tunnel keepalive is configured incorrectly because they must match on both sites.
  2. The tunnel destination will be known via the tunnel interface.
  3. The tunnel will be established and work as expected.
  4. The default MTU of the tunnel interface is 1500 bytes.

Answer(s): B



Viewing Page 20 of 214



Share your comments for Cisco® 350-401 exam with other users:

Big Dog 6/24/2023 4:47:00 PM

question 13 should be dhcp option 43, right?
UNITED STATES


BigMouthDog 1/22/2022 8:17:00 PM

hi team just want to know if there is any update version of the exam 350-401
AUSTRALIA


Desmond 1/5/2023 9:11:00 PM

i just took my oracle exam and let me tell you, this exam dumps was a lifesaver! without them, iam not sure i would have passed. the questions were tricky and the answers were obscure, but the exam dumps had everything i needed. i would recommend to anyone looking to pass their oracle exams with flying colors (and a little bit of cheating) lol.
SINGAPORE


whoAreWeReally 12/19/2023 8:29:00 PM

took the test last week, i did have about 15 - 20 word for word from this site on the test. (only was able to cram 600 of the questions from this site so maybe more were there i didnt review) had 4 labs, bgp, lacp, vrf with tunnels and actually had to skip a lab due to time. lots of automation syntax questions.
EUROPEAN UNION


mrtom33 11/20/2023 4:51:00 AM

i prepared for the eccouncil 350-401 exam. i scored 92% on the test.
Anonymous


Nigora 5/31/2022 10:05:00 PM

this is a beautiful tool. passed after a week of studying.
UNITED STATES