Cisco Implementing Advanced Call Control and Mobility Services (CLASSM) 300-815 Dumps in PDF

Free Cisco 300-815 Real Questions (page: 19)

A customer has multisite deployments with a globalized dial plan. The customer wants to route PSTN calls via the gateway assigned to each site.
Which two actions will fulfill the requirement? (Choose two.)

  1. Create one global route list for PSTN calls that points to one global PSTN route group.
  2. Create a route group which has all the gateways and associate it to the device pool of every site.
  3. Assign one route group as a local route group in the device pool of the corresponding site.
  4. Create one route group for each site and one global route list for PSTN calls that point to the local route group.
  5. Create a hunt group and assign it to each side route pattern.

Answer(s): A,C


Reference:

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/8x/uc8x/dialplan.html



An engineer is troubleshooting local ringback on a Cisco SIP gateway. The gateway is not ignoring the SIP 180 response with SDP from the service provider, and the far end device is sending the 180 with SDP to play ringback from the IP address specified in the SDP.
Which configuration change must be made on the gateway to resolve the issue?

  1. Router(config-sip-ua)# no disable-early-media 180
  2. Router(conf-voi-serv)# no disable-early-media 180
  3. Router(conf-voi-serv)# disable-early-media 180
  4. Router(config-sip-ua)# disable-early-media 180

Answer(s): D


Reference:

https://www.cisco.com/en/US/docs/ios/12_3t/voice/command/reference/ vrht_d2_ps5207_TSD_Products_Command_Reference_Chapter.html#wp1452642



An engineer must configure a Cisco UCM hunt list so that calls to users in a line group are routed to the first idle user and then the next.
Which distribution algorithm must be configured to accomplish this task?

  1. broadcast
  2. top down
  3. longest idle time
  4. circular

Answer(s): C


Reference:

https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_0_1/ccmcfg/b03lngrp.html



An engineer has temporarily disabled toll fraud prevention for SIP line calls on a Cisco CME12.6x and must enforce security and toll fraud prevention for the SIP line side on Cisco Unified CME. Which configuration must be used to start this process?

  1. voice service voip enable ip address trust list
  2. voice service voip ip address trusted list
  3. voice service voip ip address trusted authenticate
  4. voice service voip enable ip address trust authentication

Answer(s): B


Reference:

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/manual/ cmeadm/cmetoll.html



A company has an SRST gateway running an IOS XE image. The company plans to enable the IPv6 addressing companywide. To enable the IPv6 in a unified SRST gateway to support SIP phones, what are two supported supplementary features for an IPv6 fallback scenario? (Choose two.)

  1. three-way conference
  2. secure SIP lines
  3. T.38 fax relay
  4. transcoding
  5. SIP trunk

Answer(s): A,C


Reference:

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cusrst/admin/sccp_sip_srst/configuration/ guide/SCCP_and_SIP_SRST_Admin_Guide/srst_sip_isr4000.html



Which action is correct with respect to toll fraud prevention configuration in the Cisco Unified Communications Manager Express?

  1. Configure Direct Inward Dial for Incoming ISDN Calls with overlap dialing.
  2. Configure IP Address Trusted Authentication for Incoming VoIP Calls.
  3. Configure the command no ip address trusted authenticate under "voice service voip".
  4. Enable Secondary Dial tone on Analog and Digital FXO Ports.

Answer(s): B


Reference:

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/manual/ cmeadm/cmetoll.html#concept_ECC4F4E7ED0F45C594B703EEF34762F2



The administrator sees the voice register pool 1 command in your Cisco UCME configuration.
Which configuration is occurring in this section?

  1. configuration for a single SIP phone
  2. configuration items common for all SIP phones
  3. configuration for a pool of SIP phones (similar to device pool on Cisco UCM)
  4. configuration for SIP registrar service

Answer(s): C


Reference:

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cusrst/admin/sccp_sip_srst/configuration/ guide/SCCP_and_SIP_SRST_Admin_Guide/srst_setting_up_using_sip.html



A company wants to use a Cisco phone system without the need for a local generic server. It is maximum 30 phones using a vendor-independent, industry-standard call protocol.
What is the first command that must be entered to add this type of phone when registering a Cisco phone to this device?

  1. ephone 3
  2. voice register pool 3
  3. voice register sip ephone 3
  4. voice register ephone 3

Answer(s): B



Share your comments for Cisco 300-815 exam with other users:

R
Reddy
12/14/2023 2:42:00 AM

these are pretty useful

D
Daisy Delgado
1/9/2023 1:05:00 PM

awesome

A
Atif
6/13/2023 4:09:00 AM

yes please upload

X
Xunil
6/12/2023 3:04:00 PM

great job whoever put this together, for the greater good! thanks!

L
Lakshmi
10/2/2023 5:26:00 AM

just started to view all questions for the exam

R
rani
1/19/2024 11:52:00 AM

helpful material

G
Greg
11/16/2023 6:59:00 AM

hope for the best

H
hi
10/5/2023 4:00:00 AM

will post exam has finished

V
Vmotu
8/24/2023 11:14:00 AM

really correct and good analyze!

H
hicham
5/30/2023 8:57:00 AM

excellent thanks a lot

S
Suman C
7/7/2023 8:13:00 AM

will post once pass the cka exam

R
Ram
11/3/2023 5:10:00 AM

good content

N
Nagendra Pedipina
7/13/2023 2:12:00 AM

q:32 answer has to be option c

T
Tamer Barakat
12/7/2023 5:17:00 PM

nice questions

D
Daryl
8/1/2022 11:33:00 PM

i really like the support team in this website. they are fast in communication and very helpful.

C
Curtis Nakawaki
6/29/2023 9:13:00 PM

a good contemporary exam review

X
x-men
5/23/2023 1:02:00 AM

q23, its an array, isnt it? starts with [ and end with ]. its an array of objects, not object.

A
abuti
7/21/2023 6:24:00 PM

cool very helpfull

K
Krishneel
3/17/2023 10:34:00 AM

i just passed. this exam dumps is the same one from prepaway and examcollection. it has all the real test questions.

R
Regor
12/4/2023 2:01:00 PM

is this a valid prince2 practitioner dumps?

A
asl
9/14/2023 3:59:00 PM

all are relatable questions

S
Siyya
1/19/2024 8:30:00 PM

might help me to prepare for the exam

T
Ted
6/21/2023 11:11:00 PM

just paid and downlaod the 2 exams using the 50% sale discount. so far i was able to download the pdf and the test engine. all looks good.

P
Paul K
11/27/2023 2:28:00 AM

i think it should be a,c. option d goes against the principle of building anything custom unless there are no work arounds available

P
ph
6/16/2023 12:41:00 AM

very legible

S
sephs2001
7/31/2023 10:42:00 PM

is this exam accurate or helpful?

A
ash
7/11/2023 3:00:00 AM

please upload dump, i have exam in 2 days

S
Sneha
8/17/2023 6:29:00 PM

this is useful

S
sachin
12/27/2023 2:45:00 PM

question 232 answer should be perimeter not netowrk layer. wrong answer selected

T
tomAws
7/18/2023 5:05:00 AM

nice questions

R
Rahul
6/11/2023 2:07:00 AM

hi team, could you please provide this dump ?

T
TeamOraTech
12/5/2023 9:49:00 AM

very helpful to clear the exam and understand the concept.

C
Curtis
7/12/2023 8:20:00 PM

i think it is great that you are helping people when they need it. thanks.

S
sam
7/17/2023 6:22:00 PM

cannot evaluate yet

AI Tutor 👋 I’m here to help!