You are designing a VMware HA platform based on vSphere converged network hardware and softwarebased iSCSI storage. Which of the following is true?
Answer(s): B
VMware HA will check storage heartbeats or a lock file (NFS v3) on datastores in the event that the management network is impacted. By using a CNA and slicing the 10 GB up into smaller chunks, it could be possible perspective to have a smaller number of physical NICs but with multiple logical networks defined. As a CNA can define network and storage configuration, it could be a major outage if the NIC failed, and this would remove the extra protection the network storage heartbeats provide.Chapter 4, The Importance of vMotion, VMware HA, and Fault Tolerance
DRS and vMotion can help increase consolidation ratios.
Answer(s): A
DRS can be configured for fully automated mode and can review performance statistics on hosts. Assuming that all workloads will not have the same peak period of time, you can load balance workloads across the hosts and reuse resources in different scenarios through the working day to increase consolidation ratios. Chapter 4, The Importance of vMotion, VMware HA, and Fault Tolerance
A guest VM should be sized using . (Choose two)
Answer(s): A,C
Allocated resources are shown in the guest operating system and are not guaranteed. The amount depends on the unreserved resources available at the time. Assuming no functionality issues, you can configure a production application to be guaranteed its projected workload, and the system should deliver. Without a reservation, there is potential for a performance impact if there is contention. Chapter 5, Virtual Machines--From the Design Perspective
You are a VMware architect designing a solution for a client with an existing site who wishes to build a disaster recovery site. The operations manager has presented some information in the kickoff meeting. The company has 1,000 VMs, and the average VM has the following specs:18 GB memory2 vCPU100 GBThe company already has an existing vendor relationship with a hardware vendor and would like to keep the existing storage solution roadmap in place. The following requirements are stated:RTO: 15 minutes RPO: 15 minutes Uptime: 99.99% The existing vendor relationship is a .
An assumption could impact your design. It is good to ensure that project team and wider business are aware of assumptions and that they are agreed and validated as part of the design consideration process.Chapter 2, Gathering Information and Spotting the Gaps
The RTO and RPO objectives can be achieved using VMware HA.
The majority of applications do not require 100% uptime. VMware HA can be configured to restart workloads within a few seconds. The software can be configured to produce a fully automated DR and BC system. It is, however, not completely application aware and will depend on application requirements to be proved useful. From a VMware admin point of view, VMware HA is very important and worth exploring in the design process. Chapter 4, The Importance of vMotion, VMware HA, and Fault Tolerance
You are a VMware consultant working at a small managed services company. The company has won a contract with a large company, Company A, to host its test and dev platform, with the chance on annual review to host the production platform. Although you have been engaged early in the project due to business requirements, the budget for the project has already been combined with that for another DR project for another company, Company B. The thought process for this decision is that, if needed, the test systems from Company A have a lower requirement in the unlikely event of Company B having a DR event.All the items have been bought and are to be delivered. Your role is to take the equipment provided and construct, develop, and implement a scalable working vSphere platform. The following requirements are stated:Company A test machines must be provided with sufficient resources for BAU. Company B systems can be made available with minimum impact to Company A. For Company A, RTO is 7 days, and RPO is 1 month.For company B, RTO is 1 hour, and RPO is 15 minutes. Using a shared infrastructure in this way is a risk to the project.
The technical design process enables the platform designer to work in a methodical way and with others with similar objectives. A risk is an object that could prevent the delivery of the project requirements.Chapter 1, The Technical Design Process
You are a VMware consultant working at a small managed-services company that has won a contract with a large Company A to host its test and dev platform, with the chance on annual review to host its production platform. Although you have been engaged early in the project, because of business requirements, the budget for the project has already been combined with another DR project for another Company B. The thought process for this decision is that, if needed, the test systems from Company A have a lower requirement in the unlikely event of Company B having a DR event.All the items have been bought and are to be delivered. Your role is to take the equipment provided and construct, develop, and implement a scalable working vSphere platform.The requirements stated are:Company A test machines must be provided with sufficient resources for BAU. Company B systems must be made available with minimum impact to Company A. The RTO for Company A is seven days, with an RPO of one month. Company B's RTO is 1 hour, and its RPO is 15 minutes. The use of a shared infrastructure used in this way is a constraint to the project.
An item from the current state analysis that would restrict or change a design choice is potentially a constraint. These factors can limit the design and in some cases prevent the realization of the project vision.
You are a VMware consultant who has been hired to take over a mismanaged VMware vSphere 5 platform estate. You are presented with the vCenter administrator password and given the following information.1. The system has full production support from VMware.2. The platform has been suffering from performance problems for two weeks.3. No documentation exists.Your role is to design and implement a platform that meets the following requirements: R001: Stable for current workloads R002: Supportable by operations staffWhich of the following discovery methods should be used?
There are two types of discovery methods:Active discovery can run processes which are detrimental and can impact a system, and normally requires an agent. With passive discovery, data is obtained in a non- impactful, non-intrusive manner with no agents. Data such as this normally needs more experience to obtain and interpret/present.
Share your comments for VMware VDCD510 exam with other users:
question 13 should be dhcp option 43, right?
the buy 1 get 1 is a great deal. so far i have only gone over exam. it looks promissing. i report back once i write my exam.
is this dump good
good ................
passed
yes going good
good questions for practice
need dump and sap notes for c_s4cpr_2308 - sap certified application associate - sap s/4hana cloud, public edition - sourcing and procurement
question 11: d i personally feel some answers are wrong.
nice questions
looking for c1000-158: ibm cloud technical advocate v4 questions
can you share the pdf
admin ii is real technical stuff
could you post the link
hello send me dumps
it is very nice
i gave the amazon dva-c02 tests today and passed. very helpful.
there is an incorrect word in the problem statement. for example, in question 1, there is the word "speci c". this is "specific. in the other question, there is the word "noti cation". this is "notification. these mistakes make this site difficult for me to use.
passed my az-120 certification exam today with 90% marks. studied using the dumps highly recommended to all.
i need it, plz make it available
q47: intrusion prevention system is the correct answer, not patch management. by definition, there are no patches available for a zero-day vulnerability. the way to prevent an attacker from exploiting a zero-day vulnerability is to use an ips.
this is simple but tiugh as well
questão 4, segundo meu compilador local e o site https://www.jdoodle.com/online-java-compiler/, a resposta correta é "c" !
its very useful
i mastered my skills and aced the comptia 220-1102 exam with a score of 920/1000. i give the credit to for my success.
real questions
very helpful assessments
hi there, i would like to get dumps for this exam
i studied for the microsoft azure az-204 exam through it has 100% real questions available for practice along with various mock tests. i scored 900/1000.
please upload 1z0-1072-23 exam dups
i was hoping if you could please share the pdf as i’m currently preparing to give the exam.
i am looking for oracle 1z0-116 exam
where we can get the answer to the questions