VMware VDCD510 Exam (page: 3)
VMware Certified Advanced Professional - Datacenter DesignExam
Updated on: 12-Feb-2026

Viewing Page 3 of 36

A(n) is an item that is taken to be true in the design phases but has not been tested prior to execution.

  1. requirement
  2. constraint
  3. assumption
  4. risk

Answer(s): C

Explanation:

An assumption could impact your design. It is good to ensure that project team and wider business are aware of assumptions and that they are agreed and validated as part of the design consideration process. Chapter 2, Gathering Information and Spotting the Gaps



You are a virtualization consultant working on a DR project. You have proposed a solution that uses SAN replication technology to replicate production virtual machine files. This meets the cold standby requirement. Which of the following could be a design constraint?

  1. The hardware currently being used in the datacenter is out of support.
  2. The company is undecided about the choice of centralized storage to be used in the enterprise.
  3. The company is at the end of year 1 of a 3-year contract for the point-to-point link between Site A and Site B. This link is currently 10 MB.

Answer(s): C

Explanation:

An item from the current state analysis that would restrict or change a design choice is potentially a constraint. Such factors can limit a design and in some cases prevent the realization of a project vision.
Chapter 2, Gathering Information and Spotting the Gaps



You are a technical consultant designing a solution for an online retail company. The project vision is to deploy a hybrid cloud, with the internal team developing the website on internal infrastructure and migrating production-ready applications to a hosting provider. The project is expected to ease deployment and require less infrastructure capital expenditure--without lowering application quality. Which of the following is a risk to the project?

  1. The solution must adhere to ISO 27001.
  2. Change control of the hosting vCloud platform is not under full control of the internal business.
  3. The hosting provider outsources the platform support to the platform vendor.
  4. The applications to be deployed on the production hosts are not fully developed, although a beta exists.

Answer(s): B

Explanation:

The technical design process enables the platform designer to work in a methodical way and with others who have similar objectives. A risk is that a project item could potentially prevent the vision or aspects of it (requirements) from being created.
Chapter 1, The Technical Design Process



A DR project requires a recovery time objective (RTO) of 4 hours and has a recovery point objective (RPO) of 2 hours. The system fails at 8 p.m. on a Sunday evening. At what time is the application expected to be available to the end users?

  1. Midnight
  2. 10 p.m.
  3. 2 a.m.
  4. 11 p.m.

Answer(s): A

Explanation:

The recovery time objective (RTO)--also known as the return to operation--is the amount of time it takes to restore a service after a failure has taken place. The recovery point objective (RPO) is the point in time to which the system needs to be restored following a failure. Chapter 3, RTO, RPO, and All That Stuff?



A project vision in some cases may not be achieved due to constraints, risks, and other project factors. However, a project vision is required to guide a project throughout the life cycle.

  1. True
  2. False

Answer(s): A

Explanation:

The technical design process enables a platform designer to work in a methodical way and with others who have similar objectives. The vision is the endpoint--the environment or situation whereby the business would ideally like to be following the process. Chapter 1, The Technical Design Process



A software vendor-provided best practice should be adhered to .
(Choose two)

  1. where possible, respecting other project requirements
  2. at all times because the vendor wrote and designed the software
  3. in the absence of other requirements as a guide to configuration

Answer(s): A,C

Explanation:

A best practice is based on experience with delivering a solution. A new product will have limited best-practice information except for vendor- or vendor-partner-based recommendations. The longer a technology is used in a community, the more potential success; therefore, best practices may change over time. Chapter 6, Validation, Thoughts, and Processes



An application has an SLA whereby the service must be restored in 4 hours, with 15- minute data loss. Which of the following statements is valid?

  1. The platform must provide the application with RTO of 15 minutes and RPO of 4 hours.
  2. The platform must provide the application with RTO of 4 hours and RPO of 15 minutes.

Answer(s): B

Explanation:

The recovery time objective (RTO)--also known as the return to operation--is the amount of time it takes to restore a service after a failure has taken place. The recovery point objective (RPO) is the point in time to which the system needs to be restored following a failure. Chapter 3, RTO, RPO, and All That Stuff?



Which of the following type of discovery methods used in state-analysis techniques is more likely to affect application or server performance.

  1. Active
  2. Passive
  3. Both A and B

Answer(s): A

Explanation:

There are two types of discovery methods: active and passive. Active discovery methods can run processes that are detrimental and can impact a system. They normally require an agent. With passive discovery methods, data is obtained in a non-impact, non-intrusive manner, with no agents. Obtaining and interpreting/presenting data such as this normally requires more experience. Chapter 2, Selecting the Best Tool for the Job



Viewing Page 3 of 36



Share your comments for VMware VDCD510 exam with other users:

Nagendra Pedipina 7/13/2023 2:22:00 AM

q:42 there has to be a image in the question to choose what does it mean from the options
INDIA


BrainDumpee 11/18/2023 1:36:00 PM

looking for cphq dumps, where can i find these for free? please and thank you.
UNITED STATES


sheik 10/14/2023 11:37:00 AM

@aarun , thanks for the information. it would be great help if you share your email
Anonymous


Random user 12/11/2023 1:34:00 AM

1z0-1078-23 need this dumps
Anonymous


labuschanka 11/16/2023 6:06:00 PM

i gave the microsoft azure az-500 tests and prepared from this site as it has latest mock tests available which helped me evaluate my performance and score 919/1000
Anonymous


Marianne 10/22/2023 11:57:00 PM

i cannot see the button to go to the questions
Anonymous


sushant 6/28/2023 4:52:00 AM

good questions
EUROPEAN UNION


A\MAM 6/27/2023 5:17:00 PM

q-6 ans-b correct. https://docs.paloaltonetworks.com/pan-os/9-1/pan-os-cli-quick-start/use-the-cli/commit-configuration-changes
UNITED STATES


unanimous 12/15/2023 6:38:00 AM

very nice very nice
Anonymous


akminocha 9/28/2023 10:36:00 AM

please help us with 1z0-1107-2 dumps
INDIA


Jefi 9/4/2023 8:15:00 AM

please upload the practice questions
Anonymous


Thembelani 5/30/2023 2:45:00 AM

need this dumps
Anonymous


Abduraimov 4/19/2023 12:43:00 AM

preparing for this exam is overwhelming. you cannot pass without the help of these exam dumps.
UNITED KINGDOM


Puneeth 10/5/2023 2:06:00 AM

new to this site but i feel it is good
EUROPEAN UNION


Ashok Kumar 1/2/2024 6:53:00 AM

the correct answer to q8 is b. explanation since the mule app has a dependency, it is necessary to include project modules and dependencies to make sure the app will run successfully on the runtime on any other machine. source code of the component that the mule app is dependent of does not need to be included in the exported jar file, because the source code is not being used while executing an app. compiled code is being used instead.
Anonymous


Merry 7/30/2023 6:57:00 AM

good questions
Anonymous


VoiceofMidnight 12/17/2023 4:07:00 PM

Delayed the exam until December 29th.
UNITED STATES


Umar Ali 8/29/2023 2:59:00 PM

A and D are True
Anonymous


vel 8/28/2023 9:17:09 AM

good one with explanation
Anonymous


Gurdeep 1/18/2024 4:00:15 PM

This is one of the most useful study guides I have ever used.
CANADA