VMware 5V0-41.21 Exam (page: 1)
VMware NSX-T Data Center 3.1 Security
Updated on: 25-Dec-2025

Viewing Page 1 of 15

Which esxcli command lists the firewall configuration on ESXi hosts?

  1. esxcli network firewall ruleset list
  2. vsipioct1 getrules -filter <filter-name>
  3. esxcli network firewall rules
  4. vsipioct1 getrules -f <filter-name>

Answer(s): A

Explanation:

This command allows you to display the current firewall ruleset configuration on an ESXi host. It will show the ruleset names, whether they are enabled or disabled, and the services and ports that the ruleset applies to.
For example, you can use the command "esxcli network firewall ruleset list" to list all the firewall rulesets on the host.
You can also use the command "esxcli network firewall ruleset rule list -r <ruleset_name>" to display detailed information of the specific ruleset, where <ruleset_name> is the name of the ruleset you want to display.
It's important to note that you need to have access to the ESXi host's command-line interface (CLI) and have appropriate permissions to run this command.
https://docs.vmware.com/en/VMware-
vSphere/6.7/com.vmware.vcli.ref.doc/esxcli_network_firewall_ruleset.html



Which three are required by URL Analysis? (Choose three.)

  1. NSX Enterprise or higher license key
  2. Tier-1 gateway
  3. Tier-0 gateway
  4. OFW rule allowing traffic OUT to Internet
  5. Medium-sized edge node (or higher), or a physical form factor edge
  6. Layer 7 DNS firewall rule on NSX Edge cluster

Answer(s): B,D,F

Explanation:

To use URL Analysis, you will need to have a Tier-1 gateway and a Layer 7 DNS firewall rule on the NSX Edge cluster. Additionally, you will need to configure an OFW rule allowing traffic OUT to the Internet. Lastly, a medium-sized edge node (or higher), or a physical form factor edge is also required as the URL Analysis service will run on the edge node. For more information, please see this VMware Documentation article[1], which explains how to configure URL Analysis on NSX. [1] https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.1/nsxt_31_url_analysis/GUID- 46BC65F3-7A45-4A9F-B444-E4A1A7E0AC4A.html



Which two are requirements for URL Analysis? (Choose two.)

  1. The ESXi hosts require access to the Internet to download category and reputation definitions.
  2. A layer 7 gateway firewall rule must be configured on the tier-0 gateway uplink to capture DNS traffic.
  3. A layer 7 gateway firewall rule must be configured on the tier-1 gateway uplink to capture DNS traffic,
  4. The NSX Edge nodes require access to the Internet to download category and reputation definitions.
  5. The NSX Manager requires access to the Internet to download category and reputation definitions.

Answer(s): C,D

Explanation:

The NSX Edge nodes require access to the Internet to download category and reputation definitions, and a layer 7 gateway firewall rule must be configured on the tier-1 gateway uplink to capture DNS traffic. This will allow the URL Analysis service to analyze incoming DNS traffic and block malicious requests. For more information, please see this VMware Documentation article[1], which explains how to configure URL Analysis on NSX.
[1] https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.1/nsxt_31_url_analysis/GUID- 46BC65F3-7A45-4A9F-B444-E4A1A7E0AC4A.html



Refer to the exhibit.



Referencing the exhibit, what is the VMware recommended number of NSX Manager Nodes to additionally deploy to form an NSX-T Manager Cluster?

  1. 4
  2. 3
  3. 2
  4. 5

Answer(s): B



In a brownfield environment with NSX-T Data Center deployed and configured, a customer is interested in Endpoint Protection integrations.
What recommendation should be provided to the customer when it comes to their existing virtual machines?

  1. Virtual machine must be protected by vSphere H
  2. Virtual machine hardware should be version 10 or higher.
  3. A minimum installation of VMware tools is required.
  4. A custom install of VMware tools is required to select the drivers.

Answer(s): D

Explanation:

Endpoint Protection (EPP) integrations with NSX-T Data Center typically involve installing a security agent on the virtual machines (VMs) in the environment. This agent communicates with the NSX-T Data Center platform to provide security features such as antivirus and intrusion detection. In order for the agent to work properly, it is important that the correct drivers are installed on the VMs. Typically, this is done by installing VMware tools on the VMs, which provides the necessary drivers. However, in a brownfield environment, the VMs may already have VMware tools installed and the drivers may not be the correct version for the agent to work properly. In this case, it is recommended to perform a custom install of VMware tools and select the drivers specifically for the agent.


Reference:

VMware NSX-T Data Center Endpoint Protection documentation https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.1/com.vmware.nsxt.epp.doc/GUID- C6F7F8C3-2F7B-4D5C-974F-F9C9E5BD5C5F.html
VMware Tools documentation https://docs.vmware.com/en/VMware- vSphere/7.0/com.vmware.vsphere.vm_admin.doc/GUID-D2F7D8C9-9D05-4F0F-A717- C4B4D4F4E4E4.html



Viewing Page 1 of 15



Share your comments for VMware 5V0-41.21 exam with other users:

ketty 11/9/2023 8:10:00 AM

very helpful
Anonymous


Sonail 5/2/2022 1:36:00 PM

thank you for these questions. it helped a lot.
UNITED STATES


Shariq 7/28/2023 8:00:00 AM

how do i get the h12-724 dumps
Anonymous


adi 10/30/2023 11:51:00 PM

nice data dumps
Anonymous


EDITH NCUBE 7/25/2023 7:28:00 AM

answers are correct
SOUTH AFRICA


Raja 6/20/2023 4:38:00 AM

good explanation
UNITED STATES


BigMouthDog 1/22/2022 8:17:00 PM

hi team just want to know if there is any update version of the exam 350-401
AUSTRALIA


francesco 10/30/2023 11:08:00 AM

helpful on 2017 scrum guide
EUROPEAN UNION


Amitabha Roy 10/5/2023 3:16:00 AM

planning to attempt for the exam.
Anonymous


Prem Yadav 7/29/2023 6:20:00 AM

pleaseee upload
INDIA


Ahmed Hashi 7/6/2023 5:40:00 PM

thanks ly so i have information cia
EUROPEAN UNION


mansi 5/31/2023 7:58:00 AM

hello team, i need sap qm dumps for practice
INDIA


Jamil aljamil 12/4/2023 4:47:00 AM

it’s good but not senatios based
UNITED KINGDOM


Cath 10/10/2023 10:19:00 AM

q.119 - the correct answer is b - they are not captured in an update set as theyre data.
VIET NAM


P 1/6/2024 11:22:00 AM

good matter
Anonymous


surya 7/30/2023 2:02:00 PM

please upload c_sacp_2308
CANADA


Sasuke 7/11/2023 10:30:00 PM

please upload the dump. thanks very much !!
Anonymous


V 7/4/2023 8:57:00 AM

good questions
UNITED STATES


TTB 8/22/2023 5:30:00 AM

hi, could you please update the latest dump version
Anonymous


T 7/28/2023 9:06:00 PM

this question is keep repeat : you are developing a sales application that will contain several azure cloud services and handle different components of a transaction. different cloud services will process customer orders, billing, payment, inventory, and shipping. you need to recommend a solution to enable the cloud services to asynchronously communicate transaction information by using xml messages. what should you include in the recommendation?
NEW ZEALAND


Gurgaon 9/28/2023 4:35:00 AM

great questions
UNITED STATES


wasif 10/11/2023 2:22:00 AM

its realy good
UNITED ARAB EMIRATES


Shubhra Rathi 8/26/2023 1:12:00 PM

oracle 1z0-1059-22 dumps
Anonymous


Leo 7/29/2023 8:48:00 AM

please share me the pdf..
INDIA


AbedRabbou Alaqabna 12/18/2023 3:10:00 AM

q50: which two functions can be used by an end user when pivoting an interactive report? the correct answer is a, c because we do not have rank in the function pivoting you can check in the apex app
GREECE


Rohan Limaye 12/30/2023 8:52:00 AM

best to practice
Anonymous


Aparajeeta 10/13/2023 2:42:00 PM

so far it is good
Anonymous


Vgf 7/20/2023 3:59:00 PM

please provide me the dump
Anonymous


Deno 10/25/2023 1:14:00 AM

i failed the cisa exam today. but i have found all the questions that were on the exam to be on this site.
Anonymous


CiscoStudent 11/15/2023 5:29:00 AM

in question 272 the right answer states that an autonomous acces point is "configured and managed by the wlc" but this is not what i have learned in my ccna course. is this a mistake? i understand that lightweight aps are managed by wlc while autonomous work as standalones on the wlan.
Anonymous


pankaj 9/28/2023 4:36:00 AM

it was helpful
Anonymous


User123 10/8/2023 9:59:00 AM

good question
UNITED STATES


vinay 9/4/2023 10:23:00 AM

really nice
Anonymous


Usman 8/28/2023 10:07:00 AM

please i need dumps for isc2 cybersecuity
Anonymous