Amazon
Avaya
Checkpoint
Cisco®
CompTIA
CrowdStrike
EC-Council
EXIN
Fortinet
Google
ISC
ISC2
ITIL®
Juniper
Microsoft
Okta
Palo Alto Networks
Salesforce
All Vendors
  1. Home
  2. VMware
  3. 2V0-41.24

VMware 2V0-41.24 Exam (page: 2)
VMware NSX 4.X Professional V2
Updated on: 25-Dec-2025

Viewing Page 2 of 24
2V0-41.24 PDF 115 Questions

As part of an organization's IT security compliance requirement, NSX Manager must be configured for 2FA (two-factor authentication).
What should an NSX administrator have ready before the integration can be configured?

  1. Active Directory LDAP integration with ADFS
  2. VMware Identity Manager with NSX added as a Web Application
  3. VMware Identity Manager with an OAuth Client added
  4. Active Directory LDAP integration with OAuth Client added

Answer(s): B

Explanation:

To enable two-factor authentication (2FA) for NSX Manager, VMware Identity Manager must be configured and integrated with NSX. The NSX Manager should be added as a web application in VMware Identity Manager, which will allow 2FA to be applied during the authentication process. VMware Identity Manager supports 2FA methods, including integration with external identity providers, and it can manage access to NSX with additional security layers.



What should an NSX administrator check to verify that VMware Identity Manager integration is successful?

  1. From the NSX Ul the status of the VMv/are Identity Manager Integration must be Enabled'
  2. From the NSX CLI the status of the VMware Identity Manager Integration must be Configured'
  3. From VMware Identity Manager the status of the remote access application must be green
  4. From the NSX Ul the URI in the address bar must have locaMalstf part of it.

Answer(s): B

Explanation:

To verify that VMware Identity Manager integration is successful with NSX, the administrator should check the NSX UI for the integration status. If it is configured correctly, the status should be marked as "Enabled," indicating that the integration is active and functioning.



An administrator has been tasked with implementing the SSL certificates for the NSX Manager Cluster VIP.
Which is the correct way to implement this change?

  1. Send an API call to https://<nsx-mgr>/api/vl/cluster/api- certificate?action=set_cluster_certificate&certificate_id=<certificate_id>
  2. Send an API call to https://<nsx-
    mgr>/api/vl/node/services/http?action=apply_certificate&certificate_id=<certificate_id>
  3. SSH as admin into the NSX manager with the cluster VIP IP and run nsxcli cluster certificate node install <certificate_id>
  4. SSH as admin into the NSX manager with the cluster VIP IP and run nsxcli cluster certificate vip install <certificate_id>

Answer(s): D

Explanation:

To implement SSL certificates for the NSX Manager Cluster VIP, the correct method is to SSH into the NSX Manager (using the Cluster VIP IP) and run the nsxcli cluster certificate vip install <certificate_id> command. This command installs the SSL certificate for the VIP, ensuring that the cluster's SSL certificate is properly configured for secure communications.



An administrator wants to validate the BGP connection status between the Tier-0 Gateway and the upstream physical router.
What sequence of commands could be used to check this status on NSX Edge node?

  1. - enable <LR-D>
    - get vrf <ID>
    - show bgp neighbor
  2. - get gateways
    - vrf <number>
    - get bgp neighbor
  3. - set vrf <ID>
    - show logical-routers
    - show <LR-D> bgp
  4. - show logical-routers
    - get vrf
    - show ip route bgp

Answer(s): A

Explanation:

To validate the BGP connection status between the Tier-0 Gateway and the upstream physical router on an NSX Edge node, the correct sequence involves enabling the specific logical router (Tier-0 Gateway), checking the VRF (Virtual Routing and Forwarding) context, and then using the show bgp neighbor command to view the BGP session status.
enable <LR-D>: This command enables the logical router interface (Tier-0 Gateway) to access its configuration.
get vrf <ID>: This command checks the specific VRF (used for routing separation) to see the associated routing table.
show bgp neighbor: This command displays the status of the BGP connection, including details about the neighbor relationships and their state.



What is VMware's recommendation for the minimum MTU requirements when planning an NSX deployment?

  1. MTU should be set to 1700 or greater across the data center network including inter-data center connections.
  2. MTU should be set to 1500 or less only on inter-data center connections.
  3. Configure Path MTU Discovery and rely on fragmentation.
  4. MTU should be set to 1550 or less across the data center network including inter-data center connections.

Answer(s): A

Explanation:

VMware recommends setting the MTU (Maximum Transmission Unit) to 1700 or greater for NSX deployments. This is to ensure that the VXLAN encapsulation, which adds overhead to the original Ethernet frame, can be accommodated without fragmentation. This MTU requirement includes the entire data center network, including inter-data center connections, to ensure consistent communication across all network components involved in the NSX deployment.



Viewing Page 2 of 24



Share your comments for VMware 2V0-41.24 exam with other users:

rodrigo 6/22/2023 7:55:00 AM

i need the exam
Anonymous


Dan 6/29/2023 1:53:00 PM

please upload
Anonymous


Ale M 11/22/2023 6:38:00 PM

prepping for fsc exam
AUSTRALIA


ahmad hassan 9/6/2023 3:26:00 AM

pd1 with great experience
Anonymous


Žarko 9/5/2023 3:35:00 AM

@t it seems like azure service bus message quesues could be the best solution
UNITED KINGDOM


Shiji 10/15/2023 1:08:00 PM

helpful to check your understanding.
INDIA


Da Costa 8/27/2023 11:43:00 AM

question 128 the answer should be static not auto
Anonymous


bot 7/26/2023 6:45:00 PM

more comments here
UNITED STATES


Kaleemullah 12/31/2023 1:35:00 AM

great support to appear for exams
Anonymous


Bsmaind 8/20/2023 9:26:00 AM

useful dumps
Anonymous


Blessious Phiri 8/13/2023 8:37:00 AM

making progress
Anonymous


Nabla 9/17/2023 10:20:00 AM

q31 answer should be d i think
FRANCE


vladputin 7/20/2023 5:00:00 AM

is this real?
UNITED STATES


Nick W 9/29/2023 7:32:00 AM

q10: c and f are also true. q11: this is outdated. you no longer need ownership on a pipe to operate it
Anonymous


Naveed 8/28/2023 2:48:00 AM

good questions with simple explanation
UNITED STATES


cert 9/24/2023 4:53:00 PM

admin guide (windows) respond to malicious causality chains. when the cortex xdr agent identifies a remote network connection that attempts to perform malicious activity—such as encrypting endpoint files—the agent can automatically block the ip address to close all existing communication and block new connections from this ip address to the endpoint. when cortex xdrblocks an ip address per endpoint, that address remains blocked throughout all agent profiles and policies, including any host-firewall policy rules. you can view the list of all blocked ip addresses per endpoint from the action center, as well as unblock them to re-enable communication as appropriate. this module is supported with cortex xdr agent 7.3.0 and later. select the action mode to take when the cortex xdr agent detects remote malicious causality chains: enabled (default)—terminate connection and block ip address of the remote connection. disabled—do not block remote ip addresses. to allow specific and known s
Anonymous


Yves 8/29/2023 8:46:00 PM

very inciting
Anonymous


Miguel 10/16/2023 11:18:00 AM

question 5, it seems a instead of d, because: - care plan = case - patient = person account - product = product2;
SPAIN


Byset 9/25/2023 12:49:00 AM

it look like real one
Anonymous


Debabrata Das 8/28/2023 8:42:00 AM

i am taking oracle fcc certification test next two days, pls share question dumps
Anonymous


nITA KALE 8/22/2023 1:57:00 AM

i need dumps
Anonymous


CV 9/9/2023 1:54:00 PM

its time to comptia sec+
GREECE


SkepticReader 8/1/2023 8:51:00 AM

question 35 has an answer for a different question. i believe the answer is "a" because it shut off the firewall. "0" in registry data means that its false (aka off).
UNITED STATES


Nabin 10/16/2023 4:58:00 AM

helpful content
MALAYSIA


Blessious Phiri 8/15/2023 3:19:00 PM

oracle 19c is complex db
Anonymous


Sreenivas 10/24/2023 12:59:00 AM

helpful for practice
Anonymous


Liz 9/11/2022 11:27:00 PM

support team is fast and deeply knowledgeable. i appreciate that a lot.
UNITED STATES


Namrata 7/15/2023 2:22:00 AM

helpful questions
Anonymous


lipsa 11/8/2023 12:54:00 PM

thanks for question
Anonymous


Eli 6/18/2023 11:27:00 PM

the software is provided for free so this is a big change. all other sites are charging for that. also that fucking examtopic site that says free is not free at all. you are hit with a pay-wall.
EUROPEAN UNION


open2exam 10/29/2023 1:14:00 PM

i need exam questions nca 6.5 any help please ?
Anonymous


Gerald 9/11/2023 12:22:00 PM

just took the comptia cybersecurity analyst (cysa+) - wished id seeing this before my exam
UNITED STATES


ryo 9/10/2023 2:27:00 PM

very helpful
MEXICO


Jamshed 6/20/2023 4:32:00 AM

i need this exam
PAKISTAN