During creation of a new Organization for All Applications in VCF Automation, which four NSX constructs are automatically configured at the regional networking step? (Choose four.)
Answer(s): A,B,E,G
Comprehensive and DetailedThe VCF Automation Networking Guide (9.0) documents that when an Organization for All Applications is created, networking constructs are provisioned automatically to provide immediate connectivity. Specifically, “During region creation, the system automatically deploys a Default VPC, a Provider Tier-0 Gateway, a VPC connectivity profile, and default SNAT rules to enable outbound access.” .DNAT rules are not provisioned by default (they must be configured for inbound services). Likewise, NSX Transit Gateway is a multi-region design element, not automatically deployed for a single org setup. A VDS is a vSphere construct and not part of the NSX automation performed at this stage. Therefore, the automatically created items are: Default VPC (A), Provider Tier-0 Gateway (B), SNAT rule (E), and VPC Connectivity Profile (G).
An administrator creates a custom alert in VCF Operations for a VM with a symptom definition: “Read Latency > 1 ms.” The alert should trigger immediately once the symptom condition occurs. What additional step is required to ensure the alert functions?
Answer(s): A
Comprehensive and DetailedThe VCF Operations 9.0 Monitoring Guide specifies: “For any alert definition to be active in the environment, it must be associated with and enabled in an Active Policy.” . Creating symptom and alert definitions only defines conditions; they do not generate alerts until policies include them. REST notification plugins or payload templates are used for outbound integrations, not for enabling alerts. A super metric is only needed for custom composite KPIs, not for native read latency which is a standard metric already available. Therefore, the required step is to enable the alert in an Active Policy so that when the symptom triggers (latency > 1 ms), the alert activates.
A large corporation recently experienced a power outage at one of its primary data centers resulting in service disruption for customers in that region. An administrator is tasked to assess the current infrastructure and propose a plan to improve resiliency.Current configuration:Single-site vSAN Express Storage Architecture (ESA) cluster12 hostsCluster resource utilization (CPU, memory, and storage) is under 30%Which solution would improve resiliency and minimize service disruption in data center outages with a recovery point objective (RPO) of zero without requiring additional hosts?
The VCF 9.0 Design Guide highlights that for resiliency across sites with RPO = 0, the recommended approach is a vSAN Stretched Cluster. Documentation states: “Stretched clusters provide site-level resilience by mirroring data across two fault domains (sites). In the event of a full site outage, workloads remain available with no data loss (RPO = 0).” Relocating six hosts to another site creates the two fault domains required for vSAN Stretched Cluster. Options B and C provide backup or redundancy but not synchronous replication with zero RPO. Option D (fault domains) protects against host/rack failures, not entire data center loss. Therefore, the correct solution is to relocate hosts and configure a stretched cluster.
An organization wants to enable Service and Application Discovery across their VMware Cloud Foundation (VCF) fleet. Which optional VMware Cloud Foundation (VCF) solution must the administrator enable or deploy to facilitate this capability?
Answer(s): D
The VCF Operations for Networks (formerly vRNI) enables Application Discovery and Network Visibility. According to VCF 9.0: “Operations for Networks provides flow-based application discovery, dependency mapping, and security planning. This allows administrators to visualize application topology and relationships across the VCF fleet.” By contrast, VCF Operations for Logs provides log aggregation, while the Collector provides integration for metrics, not discovery. The vSphere Supervisor enables Kubernetes workloads, not application discovery. Therefore, to achieve Service and Application Discovery, administrators must deploy VCF Operations for Networks.
An administrator is responsible for monitoring VMware vSAN performance across a VMware Cloud Foundation (VCF) instance. The administrator confirms VCF Operations is configured correctly. When viewing Storage Operations, the vSAN Cluster Performance widget is not displaying any dat a. What additional configuration should the administrator complete to ensure the widget displays data?
According to the VCF 9.0 Operations and vSAN Integration Guide, performance metrics in the vSAN Cluster Performance widget are only available when the vSAN Performance Service is enabled. The documentation states:“The vSAN Performance Service must be enabled in vCenter Server for each vSAN cluster to collect and visualize performance statistics in VCF Operations. Without this service, performance dashboards and widgets will not display data.”Option A (Support Insight) relates to telemetry with VMware, not performance widgets.Option B (Cloud proxy as Collector) is required for general collection but not specific to vSAN widget visibility.Option C (SMART data collection) provides disk health analytics, not cluster-level performance stats.Option D is correct, because enabling the vSAN Performance Service ensures that VCF Operations receives and displays data in the vSAN Performance dashboards.Therefore, the administrator must enable the vSAN Performance Service for all vSAN clusters in vCenter.
An administrator is tasked to configure network connectivity to the organization's corporate network for their container workloads to be deployed on VMware Kubernetes Service (VKS) clusters backed by VMware NSX networking on a new VMware Cloud Foundation (VCF) deployment. Which gateway connectivity type should the administrator deploy?
The VMware Cloud Foundation 9.0 networking design documentation specifies that container workloads running on VMware Kubernetes Service (VKS) with NSX networking require external connectivity via a Centralized Connectivity model. This is implemented using an NSX Tier-0 (T0) Gateway which provides north-south routing to the corporate physical network.The guide states: “In VKS deployments backed by NSX networking, workloads achieve external reachability through a centralized Tier-0 Gateway, ensuring integration with corporate networking and enterprise services.” This model ensures traffic consolidation, policy enforcement, and simplified routing for Kubernetes workloads.Round-robin Connectivity is not a supported NSX gateway connectivity model.Distributed Connectivity refers to east-west NSX overlay communication, not north-south connectivity.Physical Connectivity is not precise, as workloads do not connect directly to the physical network; instead, they use logical routing.Centralized Connectivity is the correct model, where the T0 Gateway centralizes external routing for container workloads.
VMware Cloud Foundation 9.0 – NSX Networking and VKS Deployment Guide (Tier-0 Gateway connectivity model)..
What is the purpose of Istio Service Mesh?
Answer(s): B
The VCF 9.0 Service Mesh Integration Guide defines Istio as: “Istio Service Mesh provides an infrastructure layer that transparently handles service-to-service communication, securing, observing, and controlling traffic between microservices.” The key purpose is enabling structured and observable communication between applications. While Istio includes discovery and load balancing, those are features, not the overarching purpose. A centralized routing table (Option D) is not the core definition. VMware documentation highlights Istio’s role in service-to-service communication, observability, and policy enforcement within the service mesh. Therefore, the correct answer is B.
An administrator is deciding on a storage solution to create the first management workload domain for a new VMware Cloud Foundation (VCF) instance. Which three storage solutions can be used as principal storage? (Choose three.)
Answer(s): C,D,E
The VCF 9.0 Architecture Guide outlines valid principal storage options for the management domain. It states: “The management domain must be deployed using vSAN, NFS, or Fibre Channel (FC). Supported protocols include NFSv3 and VMFS on FC.” vSAN (including OSA) is the default recommended option, but NFSv3 and VMFS on FC are also supported for environments where external storage arrays are required.NVMe/TCP and vVols are not supported for the initial management domain’s principal storage. vVols may be used in workload domains after deployment, but they are not a supported foundation for the management domain. Therefore, the three correct storage solutions for the first management workload domain are: VMFS on FC, NFSv3, and vSAN OSA.
Share your comments for VMware 2V0-17.25 exam with other users:
yes, can you please upload the exam?
how many questions are there in these dumps?
hi team, please upload this , i need it.
question 14 - run terraform import: this is the recommended best practice for bringing manually created or destroyed resources under terraform management. you use terraform import to associate an existing resource with a terraform resource configuration. this ensures that terraform is aware of the resource, and you can subsequently manage it with terraform.
please upload dump. thanks in advance.
great great
answer 16 should be b your organizational policies require you to use virtual machines directly
the question are kind of tricky of you didnt get the hnag on it.
can anyone tell me if this is for rhel8 or rhel9?
good content
pdb and cdb are critical to the database
till 104 questions are free, lets see how it helps me in my exam today.
question # 56, answer is true not false.
i would be requiring dumps to prepare for certification exam
very helpful
control file is the heart of rman backup
hi could you please upload the ibm c2090-543 dumps
appriciate if you could upload this again
please upload the dump
i found some questions answers mismatch with explanation answers. please properly update
nothing to mention
knowable questions
very helpfull
good questions
its helpful
i just took my oracle exam and let me tell you, this exam dumps was a lifesaver! without them, iam not sure i would have passed. the questions were tricky and the answers were obscure, but the exam dumps had everything i needed. i would recommend to anyone looking to pass their oracle exams with flying colors (and a little bit of cheating) lol.
22. if you need to make sure that one computer in your hot-spot network can access the internet without hot-spot authentication, which menu allows you to do this? answer is ip binding and not wall garden. wall garden allows specified websites to be accessed with users authentication to the hotspot
is question 1 correct?
manged to pass the exam with this exam dumps.
can we please have the latest exam questions?
please help with jn0-649 latest dumps
please i need this dump. thanks
Keeping this site free takes real effort. We constantly battle automated scraping and unauthorized content copying. A quick account helps us protect the community and keep the site free.
To continue studying for your 2V0-17.25, please sign in or create a free account.