An Intelligent Map has been created of certain administered entities. Entities are to be added before the map is added to an enterprise summary view. When entities are added to the map, it is unable to be saved. What is the cause of the issue?
Answer(s): C
SolarWinds Intelligent Maps require specific functional permissions within the user's account settings to perform modifications. According to the SolarWinds Platform Administrator Guide, the ability to view a map does not automatically grant the right to edit or save changes to it.The primary cause for being unable to save edits--such as adding new entities or changing the layout--is that the user does not have Intelligent Map edit rights assigned to their user account. In the SolarWinds Web Console, map permissions are granular. An administrator must go to Settings > All Settings > Manage Accounts, select the user, and ensure the "Map Management" or specific "Allow Map Editing" toggle is set to "Yes". If this permission is absent, the user may still be able to interact with the map in a "live" temporary session (moving nodes around for visualization), but the "Save" button will either be disabled or will result in an error because the platform's security layer prevents permanent changes to the database from unauthorized accounts.
A user is building a PerfStack project to troubleshoot an issue with an application. The user is unable to find data for the storage entities that the application accesses beyond application status. Which two of the following reasons explain this discrepancy? (Choose two.)
Answer(s): A,C
PerfStack is a cross-stack data correlation tool, but its visibility is constrained by the underlying data collection modules and user security settings. According to the PerfStack Troubleshooting Guide, there are two primary reasons why specific entity data (like Storage) would be missing:Product Not Installed: Performance data for deep storage metrics (like LUN latency, Array IOPS, or Pool capacity) requires the Storage Resource Monitor (SRM) module or the equivalent HCO storage licensing tiers. If only Server & Application Monitor (SAM) is installed, the user will see the application status, but the specific storage back-end metrics will not be available for selection in the PerfStack pallet because the "collector" for that data doesn't exist.Account Limitations: SolarWinds uses Account Limitations to restrict user access to specific parts of the infrastructure. If a user account is limited to "Department = Sales" or "Vendor = Cisco," and the storage entities do not meet those criteria, those entities will be filtered out of the search results in PerfStack. Even if the data exists in the database, the platform security layer prevents the user from "finding" or displaying it to ensure data privacy and multi-tenant security.
Which two of the following ways can objects be selected when creating custom reports?
Answer(s): A,D
When creating a web-based report in the SolarWinds Platform, the first step is defining the "Selection Method" for the entities you want to include. According to the SolarWinds Platform Reporting Guide, the platform offers two primary user-friendly ways to define the scope of a report:Static Selection: This method allows the administrator to manually pick specific nodes, interfaces, or applications from a list. This is best suited for reports targeting a fixed set of infrastructure, such as "Core Data Center Switches".Dynamic Query Builder: This is the most powerful method for automated reporting. It allows you to define a set of rules--such as "Vendor is Cisco" and "Department is Finance"--that automatically update the report's content as new devices are added to monitoring that match those criteria.While advanced users can use SWQL (SolarWinds Query Language) or SQL to define a custom selection, PostgreSQL (Option B) is not used as the backend database for the SolarWinds Platform. Furthermore, while PowerShell (Option C) can be used to extract data via the SolarWinds Information Service (SWIS) API, it is not a selection method used within the native Web-Based Report builder interface.
Which two of the following formats can chart reports be exported into?
Answer(s): A,B
The export capabilities for chart-based reports are designed to provide both a visual representation and the underlying raw data. According to the SolarWinds Platform Administrator Guide, when viewing or scheduling a report that contains charts or graphs, the system supports two primary export formats:PDF: This format is the standard for visual reports. It captures the rendered chart exactly as it appears in the Web Console, making it ideal for email distribution to management or for archival purposes where the visual trend is more important than the individual data points.CSV (Comma Separated Values): When a chart is exported to CSV, the platform extracts the time- series data points used to generate that chart. This allows technical staff to import the raw performance numbers into external tools like Excel for deeper statistical analysis that may not be possible within the standard web view.While the broader reporting engine supports Excel (.xls) for tabular reports (as seen in Question 8), the specific function for exporting chart components often defaults to CSV for the data layer and PDF for the visual layer. XML (Option D) is typically reserved for report definitions (transferring a report from one server to another) rather than exporting the data results of a chart.
A user indicates when a map is created, only entities can be seen and status is not available. In addition, maps are unable to be nested. What is causing this issue?
Answer(s): B
SolarWinds Intelligent Maps are highly interactive, but their functionality is strictly gated by user permissions. According to the SolarWinds Platform documentation on Map Management, if a user can see nodes but cannot see their real-time status (the colored status ring) or perform advanced functions like nesting one map inside another, it points to a lack of Map Editing Rights.Without "Map Edit" permissions, the user is essentially in a "restricted view" mode. They can see the physical entities that have been placed on a map, but the dynamic overlays--such as the status of the node or the ability to modify the hierarchy of the map--are disabled to prevent unauthorized changes to the global map configuration. To resolve this, a Platform Administrator must navigate to Settings > All Settings > Manage Accounts, edit the specific user account, and change the "Map Management" or "Allow Map Editing" permission to "Yes". This grants the user the ability to interact with the map's metadata and organizational structure, including nesting and status visualization.
How are devices within a network that does not respond to SNMP or WMI, discovered and imported for monitoring?
Network Discovery in the SolarWinds Platform is designed to identify as much infrastructure as possible, even if that infrastructure is "locked down." According to the SolarWinds Platform Administrator Guide, the discovery wizard follows a specific hierarchy of identification.If a device has SNMP or WMI disabled (often the case for security-hardened servers, basic switches, or simple IP-enabled appliances), the platform cannot gather deep performance metrics like CPU or memory. However, the device can still be discovered and monitored for "Up/Down" availability using a simple Ping (ICMP). To ensure these devices are added to the database during a scan, the administrator must check the box to "Include devices that only respond to ICMP" during the discovery configuration. If this is not selected, the discovery engine will skip any IP address that does not provide a valid SNMP or WMI credential response, potentially leaving gaps in the network inventory. This is the standard method for monitoring "Ping-only" nodes.
Which three of the following user accesses are available when restricting access to reports on SolarWinds Hybrid Cloud Observability (HCO)? (Choose three.)
Answer(s): A,B,C
Access control for reporting in Hybrid Cloud Observability (HCO) is highly granular, allowing administrators to define exactly what a "standard" (non-admin) user can do within the reporting module. According to the SolarWinds Platform User Account Management guides, three distinct restrictions can be applied:Preventing Access to All Reports (A): By setting a "Report Limitation" on the user account to "No Reports," the entire module is effectively hidden from the user.Preventing Access to Reports by Other Users (B): This is a privacy and security feature. Administrators can configure report permissions so that users can only see the reports they have created or those explicitly shared with them, hiding the potentially sensitive custom reports created by other teams.Preventing Access to the Report Manager (C): The "Report Manager" is the administrative interface used to create, schedule, and delete reports. By removing the "Manage Reports" permission from a user account, you allow them to view and run existing reports but prevent them from accessing the management tools required to modify them.Option D is logically incorrect because if a user has access to reports at all, they must be able to see the ones they are authorized for; "preventing access to their own reports" while allowing others would not be a standard security use case.
Alerts A and B were assigned the same trigger action through the action manager. What describes what happens when the action is modified while editing alert A's configuration?
Answer(s): D
The SolarWinds Platform utilizes a centralized Action Manager to handle alert notifications and remediations efficiently. According to the SolarWinds Platform Alerting Guide, alert actions (such as sending an email, executing a script, or posting to a Slack channel) are often treated as reusable objects. When multiple alerts (Alert A and Alert B) share the same action from the Action Manager, they are essentially pointing to a single configuration entry in the database.If an administrator edits Alert A and modifies the parameters of that shared trigger action, the change is not isolated to just that alert's workflow. Instead, the trigger action is updated in the manager. Because Alert B is linked to that same action ID, it will immediately reflect the updated configuration the next time it triggers. This behavior is designed to simplify administration; for example, if a primary on-call email address changes, an admin only needs to update the action once rather than editing every individual alert. However, it requires caution: if a user intended to change the action for Alert A only, they should instead "Copy" the action or create a new one to avoid inadvertently altering the behavior of Alert B and all other alerts sharing that centralized action.
Share your comments for SolarWinds Observability-Self-Hosted-Fundamentals exam with other users:
well formatted pdf and the test engine software is free. well worth the money i sept.
looking for 1z0-116
in question 22, shouldnt be in the data (option a) layer?
the questions are incredibly close to real exam. you people are amazing.
q15. answer is b. simple
great practice
thanks to this exam dumps, i felt confident and passed my exam with ease.
need 1z0-1105-22 exam
this is a beautiful tool. passed after a week of studying.
can you please upload the dumps for 1z0-1096-23 for oracle
its intresting, i would like to learn more abouth this
q252: dns poisoning is the correct answer, not locator redirection. beaconing is detected from a host. this indicates that the system has been infected with malware, which could be the source of local dns poisoning. location redirection works by either embedding the redirection in the original websites code or having a user click on a url that has an embedded redirect. since users at a different office are not getting redirected, it isnt an embedded redirection on the original website and since the user is manually typing in the url and not clicking a link, it isnt a modified link.
helpful dump questions
question 423 eigrp uses metric
hello nice dumps
good resource for learning
very useful
physical tempering techniques
its giving best technical knowledge
please upload
great question with explanation thanks!!
does this exam have lab sections?
please upload the braindump for .net
i need this exam 1z0-1107-2. please.
very useful!
for this question - "which three type of basic patient or member information is displayed on the patient info component? (choose three.)", list of conditions is not displayed (it is displayed in patient card, not patient info). so should be thumbnail of chatter photo
q52 should be d. vm storage controller bandwidth represents the amount of data (in terms of bandwidth) that a vms storage controller is using to read and write data to the storage fabric.
nice questions
question # 208: failure logs is not an example of operational metadata.
good questions
thank you for the test materials!
its very helpful