S10-300 Exam dumps PDF | Exam-Dumps.net (Page: 1)

QUESTION: 1

A customer has a disk subsystem with eight ports. Each port delivers 200 MB/s. The customer wants a solution designed which allows access from 32 servers with no single point of failure. Which number of HBAs and the associated throughput, provide server access to the disk subsystem?

16 HBAs, 75 MB/s
32 HBAs, 90 MB/s
64 HBAs, 25 MB/s
64 HBAs, 50 MB/s

Answer(s): C

Reveal Solution Next Question

QUESTION: 2

A customer requires a high-availability SAN for disk access. The disk array and server may each have multiple ports. How many Fabric switch ports are necessary for full redundancy in a network with one disk array and one server? (Note: throughput is not a consideration.)

3
4
5
6

Answer(s): B

Reveal Solution Next Question

QUESTION: 3

Which statement is correct?

Fan-in is the ratio of switch ports to host ports; and indication of switch load at a single host port.
Fan-in is the ratio of storage ports to host ports; an indication of storage load at a single host port.
Fan-in is the ratio of switch ports to storage ports; an indication of switch load at a single storage port.
Fan-in is the ratio of host ports to storage ports; an indication of host traffic load at a single storage port.

Answer(s): B

Reveal Solution Next Question

QUESTION: 4

Which demonstrates a strong potential for data center error(s)?

unrestricted vendor access to infrastructure for immediate resolution issues
precise documentation that outlines steps to perform during common fault conditions
defined roles and scope or all employees that service and maintain infrastructure equipment
approved change control process that limits actions to the infrastructure to those who are qualified

Answer(s): A

Reveal Solution Next Question

QUESTION: 5

A company needs to protect against data corruption using split mirror snapshots. Their RTO is 15 minutes and RPO is one hour. It takes 15 minutes to create an incremental split mirror snapshot. Which scenario fulfills their needs most efficiently?

Use one snapshot volume and incrementally establish it every 60 minutes.
Use one snapshot volume and incrementally establish it every 30 minutes.
Use two snapshot volumes and incrementally establish one volume every hour.
Use two snapshot volumes and incrementally establish one volume every 30 minutes.

Answer(s): D

Reveal Solution Next Question

QUESTION: 6

You have been asked to design a SAN/NAS that stores data that will be internally read by web browsers for data replay. Some browsers are more likely to render a readable version of a standards-based page, whereas some browsers will have problems rendering table- based data, invalidating your design. What should you implement in your design to mitigate these concerns?

A NAS solution that tracks users browser use
A SAN solution that tracks users browser use
A NAS solution that segregates the data types for browser reading
A SAN solution that segregates the data types for browser reading

Answer(s): C

Reveal Solution Next Question

QUESTION: 7

Given point-to-point, bus, loop and Fabric topologies, which solution would be considered a mixed topology approach using three separate but interconnected topologies?

a Fibre Channel-based storage network using Fabric switches with both loop attached and point-to-point attached servers and storage
a cluster of servers connecting to Ethernet switches with a combination NAS Gateway Object storage system for file sharing and block access
a mixed Serial ATA (SATA) and Serial Attached SCSI (SAS) solution using expanders where the SATA disks and the SAS disks share connectivity to the expanders
an Ethernet-based iSCSI storage network using Ethernet hubs connected to Ethernet switches with the storage devices directly attached to switches and the servers connected to hubs

Answer(s): A

Reveal Solution Next Question

QUESTION: 8

A SAN is supporting Windows and SUN operating systems. What should the administrator do to support the heterogeneous OSs?

Use zoning to separate hosts.
Have a different fabric for each OS.
Use LUN masking to separate hosts.
Direct attach each host to the storage array.

Answer(s): A

Reveal Solution Next Question

SNIA S10-300 Exam (page: 1)
SNIA Architect - Assessment, Planning & Design
Updated on: 31-Mar-2026

Access free S10-300 actual exam questions, answers, explanations and user discussions.

QUESTION: 1

QUESTION: 2

QUESTION: 3

QUESTION: 4

QUESTION: 5

QUESTION: 6

QUESTION: 7

QUESTION: 8

SNIA S10-300 Exam (page: 1) SNIA Architect - Assessment, Planning & Design Updated on: 31-Mar-2026

Access free S10-300 actual exam questions, answers, explanations and user discussions.

QUESTION: 1

QUESTION: 2

QUESTION: 3

QUESTION: 4

QUESTION: 5

QUESTION: 6

QUESTION: 7

QUESTION: 8

SNIA S10-300 Exam (page: 1)
SNIA Architect - Assessment, Planning & Design
Updated on: 31-Mar-2026