SIMULATIONOpen the link to Book1 found on the desktop. Open SalesVSProfit worksheet. Add a distribution band on Profit to show the standard deviation from- 1 to 1.
Answer(s): A
To add a distribution band on Profit to show the standard deviation from -1 to 1, you need to do the following steps:Open the link to Book1 found on the desktop. This will open the Tableau workbook that contains the SalesVSProfit worksheet.Click on the SalesVSProfit tab at the bottom of the workbook to open the worksheet. You will see a scatter plot that shows the relationship between Sales and Profit for each Sub-Category. Click on the Analytics tab on the left side of the workbook to open the Analytics pane. You will see a list of analytical objects that you can drag and drop onto your worksheet. Drag Distribution Band from the Analytics pane to Profit on the Rows shelf. This will add a distribution band on Profit that shows the average and confidence interval for each Sub-Category. Click on the Edit button on the distribution band to open the Edit Distribution Band dialog box. You will see options to customize your distribution band.Change the Band From value to -1 and the Band To value to 1. This will change the distribution band to show the standard deviation from -1 to 1, which means one standard deviation below and above the average.Click OK to apply the changes. You will see that the distribution band now shows a narrower range of values for Profit.
https://help.tableau.com/current/pro/desktop/en-us/analytics.htm https://help.tableau.com/current/pro/desktop/en-us/analytics_distributionband.htm https://help.tableau.com/current/pro/desktop/en-us/analytics_distributionband_edit.htm
SIMULATIONOpen the link to Book1 found on the desktop. Open the Histogram worksheet and use the Superstone data source.Create a histogram on the Quantity field by using bin size of 3.
To create a histogram on the Quantity field by using bin size of 3, you need to do the following steps:Open the link to Book1 found on the desktop. This will open the Tableau workbook that uses the Superstore data source.Click on the Histogram tab at the bottom of the workbook to open the Histogram worksheet. You will see a blank worksheet with no marks.Right-click on Quantity in the Measures pane and select Create Bins from the menu. This will open a dialog box that allows you to create bins for the Quantity field. Bins are groups of values that are treated as one unit in a histogram.Enter 3 in the Size of bins text box. This will set the bin size to 3, which means that each bin will contain values that are 3 units apart. For example, one bin will contain values from 0 to 2, another bin will contain values from 3 to 5, and so on.Click OK to create the bins. You will see a new field named Quantity (bin) in the Measures pane with a # sign next to it.Drag Quantity (bin) from the Measures pane to Columns on the worksheet. This will create a histogram that shows the distribution of Quantity by bins. You will see bars that represent the frequency or count of values in each bin.Optionally, you can adjust the width, color, and labels of the bars by using the options on the Marks card. You can also add filters, tooltips, or annotations to enhance your histogram.
https://help.tableau.com/current/pro/desktop/en-us/histograms.htm https://help.tableau.com/current/pro/desktop/en-us/calculations_bins.htm https://help.tableau.com/current/pro/desktop/en-us/buildmanual_histograms.htm
SIMULATIONOpen the link to Book1 found on the desktop. Open the Movie Durations worksheet. Replace the existing data source with the Netflix_2019 data source.
To replace the existing data source with the Netflix_2019 data source, you need to do the following steps:Open the link to Book1 found on the desktop. This will open the Tableau workbook that contains the Movie Durations worksheet.Click on the Movie Durations tab at the bottom of the workbook to open the worksheet. You will see a bar chart that shows the number of movies by duration for the existing data source. Go to the Data Source tab at the bottom of the workbook to see the data source page. You will see a table that shows the fields and values from the existing data source. Click on the drop-down arrow next to the data source name at the top of the page and select Replace Data Source from the menu. This will open a dialog box that allows you to replace your data source with another one.Select Netflix_2019 from the list of available data sources and click OK. This will replace your existing data source with the Netflix_2019 data source and update your worksheet accordingly. You may need to fix any broken fields or calculations that result from the replacement.
https://help.tableau.com/current/pro/desktop/en-us/datasource_replace.htm https://help.tableau.com/current/pro/desktop/en-us/datasource_replace_workbook.htm
SIMULATIONOpen the link to Book1 found on the desktop. Open the sales dashboard. Add the Sales by State sheet in a Show/Hide button to the right side of the dashboard.
To add the Sales by State sheet in a Show/Hide button to the right side of the dashboard, you need to do the following steps:Open the link to Book1 found on the desktop. This will open the Tableau workbook that contains the sales dashboard.Click on the sales dashboard tab at the bottom of the workbook to open the dashboard. You will see a dashboard that shows various charts and filters related to sales data. Drag Sales by State from the Sheets pane to the right side of the dashboard. This will add the sheet as a floating element on the dashboard. You can resize and position it as you like. Right-click on Sales by State and select Add Show/Hide Button from the menu. This will add a button that allows you to show or hide the sheet on the dashboard. You can customize the appearance and behavior of the button by clicking on it and using the options on the Marks card. Optionally, you can drag a vertical layout container from the Objects pane to the right side of the dashboard and place Sales by State and its button inside it. This will help you organize your dashboard elements and align them neatly.
https://help.tableau.com/current/pro/desktop/en-us/dashboards.htm https://help.tableau.com/current/pro/desktop/en-us/dashboards_showhide.htm https://help.tableau.com/current/pro/desktop/en-us/dashboards_create_layouts.htm
SIMULATIONOpen the link to Book1 found on the desktop. Open the CategoryPercentage worksheet. Modify the bar chart show the percentage of sales for each Subcategory within every Category. The total percentage for every Category must be 100%.
To modify the bar chart to show the percentage of sales for each Subcategory within every Category, you need to do the following steps:Open the link to Book1 found on the desktop. This will open the Tableau workbook that contains the CategoryPercentage worksheet.Click on the CategoryPercentage tab at the bottom of the workbook to open the worksheet. You will see a bar chart that shows the total sales for each Subcategory across all Categories. Right-click on Sales on the Columns shelf and select Add Table Calculation from the menu. This will open a dialog box that allows you to apply a calculation to your measure. Select Percent of Total from the Calculation Type drop-down list. This will calculate the percentage of sales for each Subcategory out of the total sales for all Subcategories. Select Category from the Compute Using drop-down list. This will calculate the percentage of sales for each Subcategory within every Category, instead of across all Categories. The total percentage for every Category will be 100%.Click OK to apply the table calculation. You will see that the bar chart now shows the percentage of sales for each Subcategory within every Category.
https://help.tableau.com/current/pro/desktop/en-us/calculations_tablecalculations.htm https://help.tableau.com/current/pro/desktop/en-us/calculations_tablecalculations_create.htm https://help.tableau.com/current/pro/desktop/en-us/calculations_tablecalculations_percentoftotal.htm
SIMULATIONOpen the link to Book1 found on the desktop. Open the Line worksheet. Modify the chart to show only main and max values of both measures in each region.
To modify the chart to show only min and max values of both measures in each region, you need to do the following steps:Open the link to Book1 found on the desktop. This will open the Tableau workbook that contains the Line worksheet.Click on the Line tab at the bottom of the workbook to open the worksheet. You will see a line chart that shows the sales and profit for each month by region.Drag Month from the Columns shelf to Filters shelf. This will open a dialog box that allows you to filter by different criteria.Select Range of Dates from the dialog box. This will show you options to filter by a range of dates or values.Select Minimum and Maximum from the drop-down list next to Month. This will filter by the minimum and maximum values of Month for each region. You can also enter specific values or use the sliders to adjust the range.Click OK to apply the filter. You will see that the line chart now shows only min and max values of both measures in each region.
https://help.tableau.com/current/pro/desktop/en-us/filtering.htm https://help.tableau.com/current/pro/desktop/en-us/filtering_range.htm
You have the following bar chart.You want the chart to appear as shown in the Mowing exhibit.What should you add?
Answer(s): B
A reference line is used in Tableau to display a line at a constant value or a computed value such as an average, median, minimum, or maximum in a bar chart. In this case, adding a reference line would allow you to show the median, upper quartile, and lower quartile, which corresponds to the changes shown in the bar chart.
DRAG DROP (Drag and Drop is not supported)You conned to a Microsoft SQL Server databaseYou need to create a custom SQL query that retrieves rows from a table named Students Only students m the city of Berlin must be returnedHow should you complete the query? (Drag the appropriate Options to the Answer Area and drop into the correct locations.)
SelectWhereThe correct way to complete the query is:SELECT * FROM [dbo] . [Students]WHERE [Students].[City] = `Berlin'The SELECT statement is used to retrieve data from a table or a view. The * symbol means that all columns will be returned. The FROM clause specifies the table or view name and the schema name. The WHERE clause is used to filter the data based on a condition. The condition is [Students].[City] = `Berlin', which means that only rows where the City column of the Students table is equal to `Berlin' will be returned.The other options are not relevant for this query. CAST is a function that converts a value from one data type to another. JOIN is a clause that combines data from two or more tables based on a common field. ON is a keyword that specifies the join condition. UNION is a set operation that combines the results of two or more queries into one result set.
https://docs.microsoft.com/en-us/sql/t-sql/queries/select-transact-sql?view=sql-server- ver15 https://docs.microsoft.com/en-us/sql/t-sql/queries/where-transact-sql?view=sql-server-ver15 https://docs.microsoft.com/en-us/sql/t-sql/functions/cast-and-convert-transact-sql?view=sql-server- ver15 https://docs.microsoft.com/en-us/sql/t-sql/queries/from-transact-sql?view=sql-server- ver15#join https://docs.microsoft.com/en-us/sql/t-sql/language-elements/set-operators-union- transact-sql?view=sql-server-ver15
Share your comments for Salesforce Certified Tableau Data Analyst exam with other users:
it is an exam that measures your understanding of cloud computing resources provided by aws. these resources are aligned under 6 categories: storage, compute, database, infrastructure, pricing and network. with all of the services and typees of services under each category
good and very useful
i cleared the az-104 exam by scoring 930/1000 on the exam. it was all possible due to this platform as it provides premium quality service. thank you!
easy questions
could you please upload ad0-127 dumps
good content
understanding about joins
please upload oracle cloud infrastructure 2023 foundations associate exam braindumps. thank you.
questions made studying easy and enjoyable, passed on the first try!
has anyone recently attended safe 6.0 exam? did you see any questions from here?
question 13 should be dhcp option 43, right?
the buy 1 get 1 is a great deal. so far i have only gone over exam. it looks promissing. i report back once i write my exam.
is this dump good
good ................
passed
yes going good
good questions for practice
need dump and sap notes for c_s4cpr_2308 - sap certified application associate - sap s/4hana cloud, public edition - sourcing and procurement
question 11: d i personally feel some answers are wrong.
nice questions
looking for c1000-158: ibm cloud technical advocate v4 questions
can you share the pdf
admin ii is real technical stuff
could you post the link
hello send me dumps
it is very nice
i gave the amazon dva-c02 tests today and passed. very helpful.
there is an incorrect word in the problem statement. for example, in question 1, there is the word "speci c". this is "specific. in the other question, there is the word "noti cation". this is "notification. these mistakes make this site difficult for me to use.
passed my az-120 certification exam today with 90% marks. studied using the dumps highly recommended to all.
i need it, plz make it available
q47: intrusion prevention system is the correct answer, not patch management. by definition, there are no patches available for a zero-day vulnerability. the way to prevent an attacker from exploiting a zero-day vulnerability is to use an ips.
this is simple but tiugh as well
questão 4, segundo meu compilador local e o site https://www.jdoodle.com/online-java-compiler/, a resposta correta é "c" !
its very useful
Keeping this site free takes real effort. We constantly battle automated scraping and unauthorized content copying. A quick account helps us protect the community and keep the site free.
To continue studying for your Certified Tableau Data Analyst, please sign in or create a free account.