Amazon
Avaya
Cisco
CompTIA
CrowdStrike
EC-Council
EXIN
Fortinet
Google
ISC
ISC2
ITIL
Juniper
Microsoft
NVIDIA
Okta
Palo Alto Networks
Salesforce
SAP
ServiceNow
All Vendors

PMI Certified Associate in Project Management (-100) PMI-100 Dumps in PDF

Free PMI PMI-100 Real Questions (page: 104)

PMI-100 PDF — 1320 Questions

Project Stakeholder Management focuses on:

  1. project staff assignments
  2. project team acquisition
  3. managing conflicting interests
  4. communication methods

Answer(s): C

Explanation:

PROJECT STAKEHOLDER MANAGEMENT
Project Stakeholder Management includes the processes required to identify the people, groups, or organizations that could impact or be impacted by the project, to analyze stakeholder expectations and their impact on the project, and to develop appropriate management strategies for effectively engaging stakeholders in project decisions and execution. Stakeholder management also focuses on continuous communication with stakeholders to understand their needs and expectations, addressing issues as they occur, managing conflicting interests and fostering appropriate stakeholder engagement in project decisions and activities. Stakeholder satisfaction should be managed as a key project objective



A risk that arises as a direct result of implementing a risk response is called a:

  1. contingent risk
  2. residual risk
  3. potential risk
  4. secondary risk

Answer(s): D

Explanation:

11.5.2 Plan Risk Responses: Tools and Techniques
Several risk response strategies are available. The strategy or mix of strategies most likely to be effective should be selected for each risk. Risk analysis tools, such as decision tree analysis (Section 11.4.2.2), can be used to choose the most appropriate responses. Specific actions are developed to implement that strategy, including primary and backup strategies, as necessary. A fallback plan can be developed for implementation if the selected strategy turns out not to be fully effective or if an accepted risk occurs. Secondary risks should also be reviewed. Secondary risks are risks that arise as a direct result of implementing a risk response. A contingency reserve is often allocated for time or cost. If developed, it may include identification of the conditions that trigger its use.



The purpose of developing a project scope management plan is to:

  1. Manage the timely completion of the project.
  2. Ensure that the project includes all of the work required.
  3. Make sure the project will satisfy the needs for which it was begun.
  4. Reduce the risk of negative events in the project.

Answer(s): B



A tool and technique used in the Develop Project Charter process is:

  1. change control tools
  2. expert judgment
  3. meetings
  4. analytical techniques

Answer(s): B

Explanation:

4.1.2.1 Expert Judgment
Expert judgment is often used to assess the inputs used to develop the project charter. Expert judgment is applied to all technical and management details during this process. Such expertise is provided by any group or individual with specialized knowledge or training and is available from many sources, including:
Other units within the organization, Consultants,
Stakeholders, including customers or sponsors, Professional and technical associations, Industry groups,
Subject matter experts (SME), and Project management office (PMO).

4.1.3.1 Project Charter
The project charter is the document issued by the project initiator or sponsor that formally authorizes the existence of a project and provides the project manager with the authority to apply organizational resources to project activities. It documents the business needs, assumptions, constraints, the understanding of the customer’s needs and high-level requirements, and the new product, service, or result that it is intended to satisfy, such as:
Project purpose or justification,
Measurable project objectives and related success criteria, High-level requirements,
Assumptions and constraints,
High-level project description and boundaries, High-level risks,
Summary milestone schedule, Summary budget, Stakeholder list,
Project approval requirements (i.e., what constitutes project success, who decides the project is successful, and who signs off on the project),
Assigned project manager, responsibility, and authority level, and
Name and authority of the sponsor or other person(s) authorizing the project charter.

Process: 4.1. Develop Project Charter
Definition: The process of developing a document that formally authorizes the existence of a project and provides the project manager with the authority to apply organizational resources to project activities.
Key Benefit: The key benefit of this process is a well-defined project start and project boundaries, creation of a formal record of the project, and a direct way for senior management to formally accept and commit to the project.

Inputs
1. Project statement of work
2. Business case
3. Agreements
4. Enterprise environmental factors
5. Organizational process assets

Tools & Techniques

1. Expert judgment
2. Facilitation techniques

Outputs
1. Project charter



The following chart contains information about the tasks in a project.

Based on the chart, what is the cost performance index (CPI) for Task 2?

  1. 0.8
  2. 1
  3. 1.25
  4. 1.8

Answer(s): C



PDF
Viewing page 104 of 222

Share your comments for PMI PMI-100 exam with other users:

M
mo
6/11/2026 9:00:16 AM

beautiful exams

Pretoria, South Africa
A
AI Tutor Explanation
6/2/2026 6:10:04 AM

You need to implement the date dimension in the data store. The solution must meet the technical requirements. What are two ways to achieve the goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point. Populate the date dimension table by using a dataflow. Populate the date dimension table by using a Copy activity in a pipeline. Populate the date dimension view by using T-SQL. Populate the date dimension table by using a Stored procedure activity in a pipeline.Please answer

  • The two correct options: A and D.

  • Why:
- A. Populate the date dimension table by using a dataflow. A dataflow can generate and load the date dimension data into OneLake (Delta format) as part of the AnalyticsPOC data store, meeting the requirement to load data in one area before modeling, and it supports scheduling for ongoing updates. - D. Populate the date dimension table by using a Stored procedure activity in a pipeline. A pipeline with a Stored Procedure activity can run a T-SQL routine that materializes the date dimension table (2010 through the end of the current year), aligning with the need for deterministic population and orchestration.
  • Note: B (Copy in a pipeline) would require a source, and C (date dimension view via T-SQL) is feasible but not selected here; the two stated options are the ones identified as correct for this question.

Cairo, Egypt
A
AI Tutor Explanation
6/1/2026 6:15:05 AM

Question 14:

  • Correct selections: B and E

Why:
  • B. Admin access to the deployment pipeline: This gives the developers the ability to manage and run deployments within the pipeline, enabling them to deploy content to the Development and Test stages.
  • E. Contributor access to the Development and Test workspaces: This level allows them to deploy items into the Development and Test workspaces as required, while preventing deployments to Production.

Notes:
  • If you also need the developers to view Production, grant them Viewer access to the Production workspace (not part of the two required options, but needed to satisfy the “view Production” requirement).

Cairo, Egypt
A
AI Tutor Explanation
6/1/2026 5:32:19 AM

Question 5:
Question 5 asks how to identify min and max values for each column in a Dataflow result.
Correct options: B and E.

  • B. Enable column profile: This turns on column profiling, which computes descriptive statistics for each column, including min and max values.
  • E. Enable details pane: With the details pane enabled, you can view the per-column profile data (including min and max) when you select a column.

Notes:
  • A (Show column value distribution) is not required for min/max; it's for distribution histograms.
  • C (Show column profile in details pane) is optional. If the details pane is already enabled (E) and column profiling is on (B), you can view the profile without explicitly enabling C.

Cairo, Egypt
A
AI Tutor Explanation
6/1/2026 2:03:00 AM

Question 18:
Question 18: Why not A?

  • The two recommended strategies are B and D (per the answer key):
- B: Migrate users in phases based on their functions, with parallel use of legacy and Salesforce. - D: Use a full sandbox environment and run data migration tests with real legacy data.
  • Why not A: A focuses on identifying the data to migrate and planning scripts for verifying data integrity. While important, it’s primarily a preparation/validation activity, not an active risk-mitigation step during the migration itself. The question asks for strategies that directly mitigate migration risks in practice, such as staged rollout (B) and thorough testing in a sandbox with real data (D). A does not address go-live risk, user adoption, or testing of the migration process in a controlled environment.

Melbourne, Australia
A
AI Tutor Explanation
5/16/2026 7:04:20 AM

Question 4:
Question 4 is about when to use batch processing.

  • Answer key: A (the option related to “When to use batch processing”).
  • Core idea: Batch processing is used when you can tolerate some delay and don’t need results instantly. Data is collected over a period, then processed together in a batch.

Why this is correct:
  • Latencies are expected with batch jobs. The system processes data in groups rather than as soon as data arrives.
  • The processes are often not mission-critical at the exact moment they run, so delays don’t impact operations.

Key concepts to know:
  • Batch processing vs real-time processing: Batch processes collect data and run at scheduled times or when resources are available, whereas real-time processing handles data immediately.
  • When to use batch processing:
- High-volume data where immediate results aren’t required - Tasks that can be scheduled (e.g., nightly ETL, end-of-day payroll, bulk reports) - When cost or resource utilization is optimized by processing in groups
Examples: nightly data aggregation, batch payroll processing, end-of-day reconciliations.
If you want, I can walk through how to identify the right scenario for batch vs real-time in practice.

Cape Town, South Africa
A
AI Tutor Explanation
5/15/2026 9:49:16 AM

Question 5:
I can’t see the [Image] in Question 5, but I can explain the likely reasoning.

  • Correct components: SAS adapter and disk (options B and D).
  • Why: This question is about diagnosing a storage-path issue inside the node. The SAS adapter connects disks to the controller, and the disks themselves are where I/O problems or failures usually originate. The cluster switches and network interface cards are more related to the network path rather than the direct storage path, unless the symptom points to a network fault.

How to examine these two components:
  • SAS adapter
- Check link status and port mapping. - Verify firmware version and compatibility. - Inspect cabling to disk shelves and any expanders. - Look for adapter errors in system logs.
  • Disk
- Check health status for each disk (fail/degraded, SMART data). - Inspect LEDs on the disk and shelf. - Review reallocation, pending operations, and overall disk state with storage commands/logs. - Confirm hot spares and disk replacement readiness.
If you want, I can walk through the exact commands you’d use in ONTAP or a CLI.

Mumbai, India
A
AI Tutor Explanation
5/14/2026 11:59:47 AM

Question 12:
Here’s why Question 12’s correct choices are C and D.

  • C (Azure DevOps, build and upload to asset library)
- What it means: Create a deployable package from a branch in Azure DevOps, then use an LCS asset upload step to push that package into the Dynamics 365 F&O asset library. - Why it’s valid: This is a standard path to prepare and publish a deployable package to LCS for deployment.
  • D (Visual Studio, create deployment package and upload)
- What it means: Use Visual Studio to generate a Dynamics 365 deployment package, then upload that package to the LCS asset library. - Why it’s valid: Visual Studio can produce the deployable package, which is what LCS expects in the asset library.
Why A and B are not correct:
  • A: Visual Studio export the project and upload to asset library
- You don’t export a project to the asset library; you export a deployable package and upload that.
  • B: Azure DevOps, queue a build and upload the model to the asset library
- The asset library stores deployable packages, not models. You upload a package, not a model.

Innisfil, Canada
A
AI Tutor Explanation
5/14/2026 11:49:11 AM

Question 3:
Question 3 asks for two valid ways to meet the purchase order creation validation (warn if the vendor is on the exclusion list for the customer/product and block/alert accordingly).
Correct answers: C and D

  • C: In Application Explorer, create a form extension and implement validation.
- Extend the Purchase Order creation form and add validation logic (e.g., before save/submit) to check VendExclusions for the customer/item and show a warning or block the PO as needed.
  • D: Implement Chain of Command (CoC) and method wrapping by creating a form extension class.
- Use CoC to wrap the target PO creation method, perform the exclusion check after calling super(), and enforce the rule (warning or prevent creation).
Why not A or B?
  • A (class with a form data source event handler) is not the standard pattern for this UI-level validation scenario and is less direct for enforcing creation-time behavior.
  • B (table extension with validation) cannot sufficiently enforce the UI-level workflow or trigger user-facing warnings during PO creation.

So, the two valid techniques are C and D, reflecting the recommended form-extension patterns: direct form validation and CoC-based method wrapping.

Innisfil, Canada
A
AI Tutor Explanation
5/14/2026 11:42:28 AM

Question 12:
Here’s how to understand question 12.

  • What the question asks: Two valid ways to prepare and deploy a software deployable package to a test environment (via the asset library in LCS).

  • The correct options: C and D.

- C: In Azure DevOps, queue a build from the corresponding branch to produce a deployable package, then upload that package to the LCS asset library. This uses a release/build workflow and requires an LCS connection set up in Azure DevOps.
- D: In Visual Studio, create a Dynamics 365 deployment package using the dev tools, then upload that deployable package to the LCS asset library. This is the Visual Studio–based path to generate and publish a deployable package.
  • Why A and B are not correct:

- A: Exporting the project from Visual Studio and uploading the project itself to the asset library isn’t the correct artifact; the asset library expects a deployable package, not a raw project export.
- B: Queuing a build and “uploading the model” to the asset library isn’t the standard deployable package workflow; the target artifact should be a deployable package, not a model file.
Key concept: Deployable packages are published to the LCS Asset Library, and you can create them either from Visual Studio or from Azure DevOps as part of a build/release pipeline.

Innisfil, Canada
A
AI Tutor Explanation
5/13/2026 11:23:34 PM

Question 6:
Here’s how question 6 works.
Key constraint: All new and extended objects must be in an existing model named FinanceExt. Creating a brand-new model is not allowed.
Why the two correct options work:

  • B. Overlay the existing FinanceExt model and populate the solution definition.
- This keeps all changes inside FinanceExt by overlaying the base model with your solution details.
  • C. Extend the existing FinanceExt model and populate the project model definition.
- This uses the extension approach to add your changes while still residing in FinanceExt, organized via the project model definition.
Why the other options are not correct:
  • A. Create a new model that extends the existing FinanceExt model.
- Not allowed, since no new models may be created.
  • D. Modify DefaultModelForNewProject and name the model FinanceExt.
- The goal is to place changes in FinanceExt, not to name or create a new model via config; this doesn’t describe a valid way to satisfy the constraint.
In short: use B or C; both keep changes inside the existing FinanceExt model.

Innisfil, Canada
A
AI Tutor Explanation
5/13/2026 11:00:29 PM

Question 2:
I don’t have the text for Question 2 here. Please paste the exact Question 2 (including all answer choices) or describe the topic it covers.
Once I have it, I’ll:

  • Identify the exam objective it targets.
  • Break down the stem and each option.
  • Use elimination and key concepts to justify why options are correct or incorrect.
  • Give the final answer with a concise explanation of the reasoning.

If there’s an image in Question 2, describe it or transcribe any text shown.

Innisfil, Canada
A
AI Tutor Explanation
5/10/2026 12:51:57 AM

Which statement is true about using default environment variables? The environment variables can be read in workflows using the ENV: variable_name syntax. The environment variables created should be prefixed with GITHUB_ to ensure they can be accessed in workflows The environment variables can be set in the defaults: sections of the workflow The GITHUB_WORKSPACE environment variable should be used to access files from within the runner.
Correct answer: The statement "The GITHUB_WORKSPACE environment variable should be used to access files from within the runner." is true.
Why the others are false:

  • ENV: variable_name syntax is not how you read env vars in workflows. Use ${{ env.VARIABLE }} in expressions or $VARIABLE in a shell.
  • Environment variables don’t need a GITHUB_ prefix. Custom vars can have any name; GITHUB_ is only for built-in, predefined vars.
  • defaults: cannot set environment variables. It configures defaults for run steps (like shell or working-directory), not env vars.

Extra tip:
  • GITHUB_WORKSPACE (or ${{ github.workspace }}) is the root path on the runner where the repository is checked out. Use it to access files, e.g., $GITHUB_WORKSPACE/... or ${{ github.workspace }}/....

New Delhi, India
A
AI Tutor Explanation
5/7/2026 11:34:48 PM

As an administrator for this subscription, you have been tasked with recommending a solution that prohibits users from copying corporate information from managed applications installed on unmanaged devices. Which of the following should you recommend? Windows Virtual Desktop. Microsoft Intune. Windows AutoPilot. Azure AD Application Proxy.

  • Microsoft Intune

Reason: Intune can enforce app protection policies (MAM) on managed apps, even on unmanaged devices, to prevent data leakage (e.g., restricting copy/paste, saving to non-approved apps, etc.). The other options don’t address data protection within apps on unmanaged devices.

Oslo, Norway
A
AI Tutor Explanation
5/4/2026 2:43:10 AM

Question 34:

  • Question 34 asks: Which role(s) has the capability to create Policies? Choose two.
  • Likely correct roles: Compliance Manager and Compliance admin (A and B). These roles typically have policy governance rights to create and manage policies.
  • Why not the others: Compliance User is usually a limited user, not allowed to create policies. Risk Manager focuses on risks, not policy creation in standard setups.
  • Note on the provided key: The answer shown is “C” (Compliance User), which conflicts with “Choose two.” This is probably a key error. In practice, verify against your instance’s ACLs or official docs.
  • Quick check tip: In ServiceNow, review the ACLs and role permissions for the Policy records to see which roles can create policies.

New Delhi, India
A
AI Tutor Explanation
4/29/2026 11:59:58 PM

function of appnav in sdwan

  • AppNav (Application Navigation) is the Cisco SD-WAN feature that provides application-level visibility and control.
  • It maintains a catalog of applications (AppIDs) with attributes (ports/protocols, categories) and classifies traffic accordingly.
  • It allows policy authors to reference apps by name in policies, enabling application-aware routing, QoS, and service chaining based on the app’s requirements.
  • The SD-WAN fabric uses AppNav data to steer traffic along the best path, improving user experience for critical apps while optimizing WAN usage.

Sydney, Australia
A
AI Tutor Explanation
4/29/2026 5:25:25 AM

Question 1:

  • Correct answer: C. Extract the hardware ID information of each computer to a CSV file and upload the file from the Microsoft Intune admin center.

  • Why this is correct

Durban, South Africa
A
AI Tutor Explanation
4/29/2026 5:23:14 AM

Question 5:

  • Correct answer: A. User4 and User1 only

  • Why this is correct:
- The Automatic Enrollment setting in Intune has MDM user scope: GroupA. Only users in GroupA can enroll devices via MDM auto-enrollment. - Device6 will be enrolled via Windows Autopilot and Intune, so enrollment is allowed only for users in GroupA. - Based on the group memberships in the scenario, User4 and User1 are in GroupA, while User2 and User3 are not. Therefore only User4 and User1 can enroll Device6.
  • Quick tip for the exam:
- Remember: MDM user scope determines who can auto-enroll devices; MAM scope controls app protection enrollment. When a new Autopilot device is enrolled, the signing-in user must be in the MDM scope.

Durban, South Africa
A
AI Tutor Explanation
4/29/2026 5:17:10 AM

Why this is correct

  • Correct answer: C. Extract the hardware ID information of each computer to a CSV file and upload the file from the Microsoft Intune admin center.

  • Why this is correct:
- Windows Autopilot requires devices to be registered by their hardware IDs (hash) before Autopilot can deploy Windows 10 Enterprise. - Collect the hardware IDs from the new Phoenix machines, save them in a CSV, and upload that CSV in the Intune/Windows Autopilot area. This maps each device to an Autopilot deployment profile. - After registration, you can assign Autopilot profiles (Windows 10 Enterprise, etc.). Other options (serial number CSV, generalizing, or Mobility settings) are not the initial Autopilot registration steps.

Durban, South Africa
A
AI Tutor Explanation
4/25/2026 1:53:46 PM

Question 7:

  • Correct answer: B — A risk score is computed based on the number of remediations needed compared to the industry peer average.

Explanation:
  • Risk360 uses a remediation-based score. It benchmarks how many actions are required to fix issues against peers, giving a relative risk posture.
  • Why not the others:
- A: Not just total risk events by location. - C: Time to mitigate isn’t the primary scoring method. - D: Not a four-stage breach scoring approach.
Note: The page text shows a mismatch (it lists D as the answer), but the study guide describes the remediation-based scoring (B) as the correct concept.

New Delhi, India
A
AI Tutor Explanation
4/25/2026 1:42:20 PM

Question 104:

  • Correct answer: D) Multi-Terabyte (TB) Range

  • Brief explanation:
- clustering keys organize data into micro-partitions to improve pruning when queries filter on those columns. - The performance benefit is most significant for very large tables; for small tables the overhead of maintaining clustering outweighs gains. - Therefore, as a best practice, define clustering keys on tables at the TB scale.

Thane, India
C
Community Helper
4/25/2026 2:03:10 AM

Q23: Fabric Admin is correct. Because Domain admin cannot create domains. Only Fabric Admin can among the given options. Q51: Wrapping @pipeline.parameter.param1 inside {} will return a string. But question requires the expression to return Int, so correct answer should be @pipeline.parameter.param1 (no {})

New Delhi, India
A
AI Tutor Explanation
4/23/2026 3:07:03 PM

Question 62:

  • Correct answer: D (per the page)

  • Note: The explanation text on the page describes option B (use ZDX score and Analyze Score to trigger the Y Engine analysis), indicating a mismatch between the stated answer and the rationale.

  • Key concept: For fast root-cause analysis, leverage telemetry and auto-correlated insights:
- Use the user’s ZDX score for AWS and run Analyze Score to activate the Y Engine, which correlates metrics across network, client, and application to pinpoint the issue quickly.
  • Why the other options are less effective:
- A: Only checks for outages; doesn’t provide actionable root-cause analysis. - C: Deep Trace helps visibility but is manual and time-consuming. - D: Packet capture is invasive and slow; not the quickest path to root cause.

Coimbatore, India
A
AI Tutor Explanation
4/23/2026 12:26:21 PM

Question 32:

  • Answer: A (2.4GHz)

  • Why: Lower-frequency signals have longer wavelengths and experience less attenuation when passing through walls and obstacles. Higher frequencies (5GHz, 6GHz) are more easily blocked by walls. NFC operates over very short distances and is not meant to penetrate walls. So 2.4 GHz best penetrates physical objects like walls.

Allen, United States
A
AI Tutor Explanation
4/21/2026 8:48:36 AM

Question 3:

  • False is the correct answer (Option B).

Why:
  • In Snowflake, a database is a metadata object that exists within a single Snowflake account. Accounts are isolated—there isn’t one database that lives in multiple accounts.
  • You can access data across accounts via data sharing or database replication, but these create separate database objects in the other accounts (e.g., a database in the consumer account created from a share), not a single shared database across accounts.

So a single database cannot exist in more than one Snowflake account.

Thane, India
A
Anonymous User
4/16/2026 10:54:18 AM

Question 1:

  • Correct answer: E — date = sys.argv[1]
  • Why this is correct:
- When a Databricks Job passes parameters to a notebook, those parameters are supplied to the notebook's Python process as command-line arguments. The first argument after the script name is sys.argv[1], so date = sys.argv[1] captures the passed date value directly.
  • How it compares to other options:
- date = spark.conf.get("date") reads from Spark config, not from job parameters. - input() waits for user input at runtime, which isn’t how job parameters are provided. - date = dbutils.notebooks.getParam("date") would work if the notebook were invoked via dbutils.notebook.run with parameters, not

Innisfil, Canada
A
Anonymous User
4/15/2026 4:42:07 AM

Question 528:

  • Correct answer: NSG flow logs for NSG1 (Option B)

  • Why:
- Traffic Analytics uses NSG flow logs to analyze traffic patterns. You must have NSG flow logs enabled for the NSGs you want to monitor. - An Azure Log Analytics workspace is also required to store and query the traffic data. - Network Watcher must be available in the subscription for traffic analytics to function.
  • What to configure (brief steps):
- Ensure Network Watcher is enabled in the East US region (for the subscription/region). - Enable NSG flow logs on NSG1. - Ensure a Log Analytics workspace exists and is accessible (read/write) so Traffic Analytics can store and query logs.
  • Why other options aren’t correct:
- “Diagnostic settings for VM1” or “Diagnostic settings for NSG1” alone don’t guarantee flow logs are captured and sent to Log Analytics, which Traffic Analytics relies on. - “Insights for VM1” is not how Traffic Analytics collects traffic data.

Hamburg, Germany
A
Anonymous User
4/15/2026 2:43:53 AM

Question 23:
The correct answer is Domain admin (option B), not Fabric admin.

  • Domain admin provides domain-level management: create domains/subdomains and assign workspaces within those domains, which matches the tasks while following least privilege.
  • Fabric admin is global-level access and is more privileges than needed for this scenario (it would grant broader control across the Fabric environment).

Kottayam, India
A
Anonymous User
4/14/2026 12:31:34 PM

Question 2:
For question 2, the key concept is the Longest Prefix Match. Routers pick the route whose subnet mask is the most specific (largest prefix length) that still matches the destination IP.
From the options:

  • A) 10.10.10.0/28 ? 10.10.10.0–10.10.10.15
  • B) 10.10.13.0/25 ? 10.10.13.0–10.10.13.127
  • C) 10.10.13.144/28 ? 10.10.13.144–10.10.13.159
  • D) 10.10.13.208/29 ? 10.10.13.208–10.10.13.215

The destination Host A’s IP must fall within 10.10.13.208–10.10.13.215 for the /29 to be the best match. Since /29 is the longest prefix among the matching options, Router1 will use 10.10.13.208/29.
Thus, the correct answer is D.

Canada
S
srameh
4/14/2026 10:09:29 AM

Question 3:

  • Correct answer: Phase 4, Post Accreditation

  • Explanation:
- In DITSCAP, the four phases are: - Phase 1: Definition (concept and requirements) - Phase 2: Verification (design and testing) - Phase 3: Validation (fielding and evaluation) - Phase 4: Post Accreditation (ongoing operations and lifecycle management) - The description—continuing operation of an accredited IT system and addressing changing threats throughout its life cycle—fits the Post Accreditation phase, which covers operations, maintenance, monitoring, and reauthorization as threats and environment evolve.

France
O
onibokun10
4/13/2026 7:50:14 PM

Question 129:
Correct answer: CNAME

  • A CNAME record creates an alias for a domain, so newapplication.comptia.org will resolve to whatever IP address www.comptia.org resolves to. This ensures both names point to the same resource without duplicating the IP.
  • Why not the others:
- SOA defines authoritative information for a zone. - MX specifies mail exchange servers. - NS designates name servers for a zone.
  • Notes: The alias name (newapplication.comptia.org) should not have other records if you use a CNAME for it, and CNAMEs aren’t used for the zone apex (root) domain. This scenario uses a subdomain, so a CNAME is appropriate.

Swindon, United Kingdom
A
Anonymous User
4/13/2026 6:29:58 PM

Question 1:

  • Correct answer: C

  • Why this is best:
- Uses OS Login with IAM, so SSH access is granted via Google accounts rather than distributing per-user SSH keys. - Granting the compute.osAdminLogin role to a Google group gives admin access to all team members in a centralized, auditable way. - Access is auditable: Cloud Audit Logs show who accessed which VM, satisfying the security requirement to determine who accessed a given instance.
  • How it works:
- Enable OS Login on the project/instances (enable-oslogin metadata). - Add the team’s

Germany
A
Anonymous User
4/13/2026 1:00:51 PM

Question 2:

  • Answer: D. Azure Advisor

  • Why: To view security-related recommendations for resources in the Compute and Apps area (including App Service Web Apps and Functions), you use Azure Advisor. Advisor surfaces personalized best-practice recommendations across resources, including security, and shows which resources are affected and the severity.

  • Why not the others:
- Azure Log Analytics is for ad-hoc querying of telemetry, not for viewing security recommendations. - Azure Event Hubs is for streaming telemetry data, not for security recommendations.
  • Quick tip: In the portal, navigate to Azure Advisor and check the Security recommendations for App Services to see actionable items and affe

    Brazil
D
Don
4/11/2026 5:36:42 AM

Recommend using AI for Solutions rather the Answer(s) submitted here

Hamburg, Germany
AI Tutor 👋 I’m here to help!