Nutanix Certified Professional - Cloud Integration - AWS v6.7 NCP-CI-AWS Dumps in PDF

Free Nutanix NCP-CI-AWS Real Questions (page: 5)

An administrator has been tasked with ensuring NC2 VMs are able to access AWS resources. The NC2 VM traffic must not traverse the internet.
in which two ways would the administrator achieve this? (Choose two.)

  1. By using a Gateway Endpoint
  2. By using a NAT Gateway.
  3. By using an Interface Endpoint
  4. By using a VPC Peer.

Answer(s): C,D

Explanation:

To ensure that NC2 VMs can access AWS resources without traversing the internet, the administrator can use AWS VPC Peering and Interface Endpoints. Both methods ensure that traffic stays within the AWS network, maintaining security and efficiency.
Interface Endpoint:
Interface Endpoints allow you to privately connect your VPC to supported AWS services. They use AWS PrivateLink to route traffic directly to services within the AWS network, bypassing the public internet.
Steps:
Create an interface endpoint for the required service in the AWS VPC console. Ensure the security groups and route tables are configured to allow traffic to the interface endpoint.
VPC Peering:
VPC Peering allows the routing of traffic between VPCs using private IP addresses, without the need for internet gateways, NAT devices, or VPN connections.
Steps:
Create a VPC peering connection between the VPCs.
Update the route tables to direct traffic between the peered VPCs. Ensure security group rules allow the necessary traffic between VPCs.


Reference:

AWS VPC Peering Documentation
AWS Interface Endpoint Documentation
Nutanix Cloud Clusters on AWS Administration Guide



During the recovery of entities protected by Cluster Project, an administrator discovers that the recovery plan is not executing correctly because it exceeds the number of supported entities. How many entities can be recovered using a Single recovery plan?

  1. 100
  2. 200
  3. 300
  4. 400

Answer(s): C

Explanation:

The Nutanix disaster recovery capabilities include recovery plans that define how entities are recovered in the event of a failure. There is a limit to the number of entities that can be managed within a single recovery plan.
Entity Limit:
According to Nutanix documentation, the maximum number of entities that can be recovered using a single recovery plan is 300. Exceeding this limit will cause issues during the execution of the recovery plan.
Impact of Exceeding the Limit:
If the number of entities in a recovery plan exceeds the supported limit, the recovery process may fail or not execute correctly, as observed in the scenario.


Reference:

Nutanix Cloud Clusters on AWS Administration Guide
Nutanix Disaster Recovery Best Practices Documentation



An administrator needs to allow wide open access to one particular NC2 AWS cluster from an on- premises subnet of 10.19.160.0/24.
What is the proper Custom Security Group formatting to satisfy this task?









Answer(s): B

Explanation:

To allow wide open access to a particular NC2 AWS cluster from an on-premises subnet (10.19.160.0/24), the proper Custom Security Group formatting needs to include the necessary tags that specify the external cluster UUID and the networks allowed.
Custom Security Group Configuration:
The configuration should include tags to identify the cluster and the networks that should be granted access.
Key: nutanix:clusters
Key: nutanix:clusters:external
Value: <cluster-uuid>
Explanation of Choice:
Option B includes the necessary tags and values, ensuring that the specific cluster UUID is recognized and the on-premises subnet (10.19.160.0/24) can communicate with the NC2 cluster.
Security Group Tags:
nutanix:clusters:external - Identifies the cluster as external. nutanix:clusters:external:cluster-uuid - Specifies the unique identifier for the cluster, enabling proper traffic routing and access.


Reference:

Nutanix Cloud Clusters on AWS Administration Guide
AWS Security Group Documentation

Nutanix Best Practices for Custom Security Group Configuration



Which interface must be used to deploy NC2?

  1. Cloud Provider portal
  2. NC2 Tile within the my.nutanix.com portal
  3. Prism Central Dashboard
  4. Foundation running in a Cloud Virtual Machine

Answer(s): B

Explanation:

The NC2 Tile within the my.nutanix.com portal is the correct interface to deploy NC2. This portal provides an integrated and user-friendly interface specifically designed for deploying and managing Nutanix Clusters on AWS.
NC2 Deployment Interface:
NC2 Tile within the my.nutanix.com portal: This portal provides the necessary tools and options to deploy and manage NC2 clusters. It includes functionalities for setting up the clusters, configuring network settings, and managing resources.
Advantages:
User-Friendly Interface: Simplifies the deployment process with a guided setup. Integrated Tools: Provides access to all necessary tools for managing the deployment and monitoring of NC2 clusters.


Reference:

Nutanix Cloud Clusters on AWS Administration Guide
Nutanix my.nutanix.com Portal Documentation
Nutanix Best Practices for Cluster Deployment



Which entity should be contacted for AOS software supported related to NC2?

  1. Internal IT Operations team
  2. Nutanix
  3. Partner
  4. Public Cloud Vendor

Answer(s): B

Explanation:

For AOS software support related to NC2, the appropriate entity to contact is Nutanix. Nutanix provides comprehensive support for their software, including the Acropolis Operating System (AOS) used in NC2 deployments.
Support Scope:
Nutanix offers support for the deployment, configuration, and management of NC2 clusters, including any issues related to AOS software.
This includes troubleshooting, updates, and technical assistance.
Why Not Other Options:
Internal IT Operations team: Typically handles internal issues but does not have the specialized knowledge or resources for AOS software support.
Partner: May provide support but would ultimately escalate issues to Nutanix for software-specific concerns.
Public Cloud Vendor: Manages infrastructure-related issues but does not provide support for Nutanix AOS software.


Reference:

Nutanix Support Documentation
Nutanix Cloud Clusters on AWS Administration Guide
Nutanix Best Practices for AOS Support



Share your comments for Nutanix NCP-CI-AWS exam with other users:

V
VINNY
6/2/2023 11:59:00 AM

very good use full

A
Andy
12/6/2023 5:56:00 AM

very valid questions

M
Mamo
8/12/2023 7:46:00 AM

will these question help me to clear pl-300 exam?

M
Marial Manyang
7/26/2023 10:13:00 AM

please provide me with these dumps questions. thanks

A
Amel Mhamdi
12/16/2022 10:10:00 AM

in the pdf downloaded is write google cloud database engineer i think that it isnt the correct exam

A
Angel
8/30/2023 10:58:00 PM

i think you have the answers wrong regarding question: "what are three core principles of web content accessibility guidelines (wcag)? answer: robust, operable, understandable

S
SH
5/16/2023 1:43:00 PM

these questions are not valid , they dont come for the exam now

S
sudhagar
9/6/2023 3:02:00 PM

question looks valid

V
Van
11/24/2023 4:02:00 AM

good for practice

D
Divya
8/2/2023 6:54:00 AM

need more q&a to go ahead

R
Rakesh
10/6/2023 3:06:00 AM

question 59 - a newly-created role is not assigned to any user, nor granted to any other role. answer is b https://docs.snowflake.com/en/user-guide/security-access-control-overview

N
Nik
11/10/2023 4:57:00 AM

just passed my exam today. i saw all of these questions in my text today. so i can confirm this is a valid dump.

D
Deep
6/12/2023 7:22:00 AM

needed dumps

T
tumz
1/16/2024 10:30:00 AM

very helpful

N
NRI
8/27/2023 10:05:00 AM

will post once the exam is finished

K
kent
11/3/2023 10:45:00 AM

relevant questions

Q
Qasim
6/11/2022 9:43:00 AM

just clear exam on 10/06/2202 dumps is valid all questions are came same in dumps only 2 new questions total 46 questions 1 case study with 5 question no lab/simulation in my exam please check the answers best of luck

C
Cath
10/10/2023 10:09:00 AM

q.112 - correct answer is c - the event registry is a module that provides event definitions. answer a - not correct as it is the definition of event log

S
Shiji
10/15/2023 1:31:00 PM

good and useful.

A
Ade
6/25/2023 1:14:00 PM

good questions

P
Praveen P
11/8/2023 5:18:00 AM

good content

A
Anastasiia
12/28/2023 9:06:00 AM

totally not correct answers. 21. you have one gcp account running in your default region and zone and another account running in a non-default region and zone. you want to start a new compute engine instance in these two google cloud platform accounts using the command line interface. what should you do? correct: create two configurations using gcloud config configurations create [name]. run gcloud config configurations activate [name] to switch between accounts when running the commands to start the compute engine instances.

P
Priyanka
7/24/2023 2:26:00 AM

kindly upload the dumps

N
Nabeel
7/25/2023 4:11:00 PM

still learning

G
gure
7/26/2023 5:10:00 PM

excellent way to learn

C
ciken
8/24/2023 2:55:00 PM

help so much

B
Biswa
11/20/2023 9:28:00 AM

understand sql col.

S
Saint Pierre
10/24/2023 6:21:00 AM

i would give 5 stars to this website as i studied for az-800 exam from here. it has all the relevant material available for preparation. i got 890/1000 on the test.

R
Rose
7/24/2023 2:16:00 PM

this is nice.

A
anon
10/15/2023 12:21:00 PM

q55- the ridac workflow can be modified using flow designer, correct answer is d not a

N
NanoTek3
6/13/2022 10:44:00 PM

by far this is the most accurate exam dumps i have ever purchased. all questions are in the exam. i saw almost 90% of the questions word by word.

E
eriy
11/9/2023 5:12:00 AM

i cleared the az-104 exam by scoring 930/1000 on the exam. it was all possible due to this platform as it provides premium quality service. thank you!

M
Muhammad Rawish Siddiqui
12/8/2023 8:12:00 PM

question # 232: accessibility, privacy, and innovation are not data quality dimensions.

V
Venkat
12/27/2023 9:04:00 AM

looks wrong answer for 443 question, please check and update

AI Tutor 👋 I’m here to help!